Am 18.10.2013 18:33, schrieb Yannik Völker:
> Am 18.10.2013 18:16, schrieb Oleksij Rempel:
>> Am 18.10.2013 17:38, schrieb Yannik Völker:
>>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>>> Yannik, you should always use Reply-To-All so that your
>>>>> messages get sent to the mailing list and not just to me.
>>>>>
>>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>>>
>>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>>> Please post two usbmon traces, one showing the failure
>>>>>>> on your current system and the other showing the adapter
>>>>>>> running correctly under a 32-bit kernel. Instructions
>>>>>>> for usbmon are in the kernel source file
>>>>>>> Documentation/usb/usbmon.txt.
>>>>>> I never got it to work under a 32-bit kernel, i was just
>>>>>> able to utilize a windows32 driver using ndiswrapper.
>>>>>>
>>>>>> Now i got it to "work". I randomly found out that the
>>>>>> ar5523 driver actually works when you load it after you
>>>>>> unload ndiswrapper so the following steps make it work: 1.
>>>>>> modprobe ndiswrapper 2. plug in device 3. connect to wlan
>>>>>> using ndiswrapper and disconnect again (might be optional)
>>>>>> 4. modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to
>>>>>> wlan log for that is attatched as wlanthennative2.log
>>>
>>>
>>>> It sounds like linux driver didn't recognised usb id and
>>>> didn't uploaded firmware, or there was no firmware to upload.
>>> there is firmware (/lib/firmware/ar5523.bin exists) but it does
>>> not even get touched (i renamed the file and the error did not
>>> change at all)
>
>> find first usbid of your adapter (it will be changed after
>> firmware upload). And try to force driver to use this id: modprobe
>> -v ar5523 echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
>
>> instead of "07d1 3a0d" use your id.
>
>
> # lsusb
> …
> Bus 003 Device 011: ID 129b:160c CyberTAN Technology Siemens
> S30853-S1038-R351 802.11g Wireless Adapter [Atheros AR5523]
> …
>
> # modprobe ar5523
> # echo 129b 160c > /sys/bus/usb/drivers/ar5523/new_id
> <plugging device in>
> syslog:
> Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
> registered new interface driver ar5523
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.036912] usb 3-14: new
> high-speed USB device number 12 using xhci_hcd
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.053995] usb 3-14: New
> USB device found, idVendor=129b, idProduct=160c
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054005] usb 3-14: New
> USB device strings: Mfr=1, Product=2, SerialNumber=3
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054010] usb 3-14:
> Product: AR5523
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
> Manufacturer: Atheros Communications Inc
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054019] usb 3-14:
> SerialNumber: 1.0
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb 3-14:
> timeout waiting for command 01 reply
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052323] usb 3-14: could
> not initialize adapter
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052359] usb 3-14: RX USB
> error -2.
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052378] usb 3-14: error
> -1 when submitting rx urb
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052504] ar5523: probe of
> 3-14:1.0 failed with error -110
>
>> Besidy, what kernel version are you using? May be it is too old..
>
> 3.11.0-12-generic
> it is my understanding that the ar5523 driver was included from 3.8 on.
please test attached patch.
--
Regards,
Oleksij
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 17d7fec..57fc06e 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1764,7 +1764,7 @@ static struct usb_device_id ar5523_id_table[] = {
AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */
AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */
AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */
- AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108
+ AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108
(CyberTAN Technology) */
AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */
AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */
