Hi
I seem to have to take a second hurdle in using my Centrino Advanced-N 6235 with linux.
I'm trying to set the regulatory domain (currenly world domain (00))
But a "iw reg set US" or "iw reg set NL" does not succeed.
# iw reg get
country 00:
(2402 - 2472 @ 40), (6, 20)
(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 80), (6, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 80), (6, 20), PASSIVE-SCAN, NO-IBSS
(57240 - 63720 @ 2160), (N/A, 0)
# iw reg set US
# iw reg get
country 00:
(2402 - 2472 @ 40), (6, 20)
(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 80), (6, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 80), (6, 20), PASSIVE-SCAN, NO-IBSS
(57240 - 63720 @ 2160), (N/A, 0)
The only thing is this message in dmesg:
"cfg80211: Pending regulatory request, waiting for it to be processed...".
I did enable some of the kernel wifi debug options, but there is no error or more informatie.
But it doesn't get set as you can see above.
Attached:
dmesg.txt complete dmesg
iw-info.txt output of "iw phy0 info"
--
Sander
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.0-rc5+ (root@creabox) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Oct 15 23:35:58 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-rc5+ root=/dev/mapper/creabox-creabox_dom0 ro verbose debug loglevel=10 iwlwifi.debug=0xC0800000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000db9f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db9f1000-0x00000000dbe6ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbe70000-0x00000000dbe7ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dbe80000-0x00000000dbf9dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dbf9e000-0x00000000dc20cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dc20d000-0x00000000dc20dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dc20e000-0x00000000dc250fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dc251000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0DD800000 mask FFF800000 uncachable
[ 0.000000] 5 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 6 base 21E800000 mask FFF800000 uncachable
[ 0.000000] 7 base 21E600000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd730-0x000fd73f] mapped at [ffff8800000fd730]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02110000, 0x02110fff] PGTABLE
[ 0.000000] BRK [0x02111000, 0x02111fff] PGTABLE
[ 0.000000] BRK [0x02112000, 0x02112fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21e400000-0x21e5fffff]
[ 0.000000] [mem 0x21e400000-0x21e5fffff] page 2M
[ 0.000000] BRK [0x02113000, 0x02113fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21e3fffff]
[ 0.000000] [mem 0x21c000000-0x21e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02114000, 0x02114fff] PGTABLE
[ 0.000000] BRK [0x02115000, 0x02115fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xdb9f0fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xdb7fffff] page 2M
[ 0.000000] [mem 0xdb800000-0xdb9f0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdc20d000-0xdc20dfff]
[ 0.000000] [mem 0xdc20d000-0xdc20dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdc251000-0xdcffffff]
[ 0.000000] [mem 0xdc251000-0xdc3fffff] page 4k
[ 0.000000] [mem 0xdc400000-0xdcffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x36dca000-0x376dcfff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 Intel)
[ 0.000000] ACPI: XSDT 00000000dbe74080 0007C (v01 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000dbe7e100 0010C (v05 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dbe74188 09F72 (v02 Intel D53427RK 00000011 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dbf9c080 00040
[ 0.000000] ACPI: APIC 00000000dbe7e210 00072 (v03 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000dbe7e288 00044 (v01 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: TCPA 00000000dbe7e2d0 00032 (v02 APTIO4 NAPAASF 00000011 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000dbe7e308 0003C (v01 Intel D53427RK 00000011 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dbe7e348 00038 (v01 Intel D53427RK 00000011 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000dbe7e380 00315 (v01 SataRe SataTabl 00000011 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000dbe7e698 009AA (v01 PmRef Cpu0Ist 00000011 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000dbe7f048 00B22 (v01 PmRef CpuPm 00000011 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000dbe7fb70 000B8 (v01 INTEL SNB 00000011 INTL 00000001)
[ 0.000000] ACPI: ASF! 00000000dbe7fc28 000A5 (v32 INTEL HCG 00000011 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
[ 0.000000] NODE_DATA [mem 0x21e5f4000-0x21e5f7fff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880215c00000-ffff88021cdfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xdb9f0fff]
[ 0.000000] node 0: [mem 0xdc20d000-0xdc20dfff]
[ 0.000000] node 0: [mem 0xdc251000-0xdcffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
[ 0.000000] On node 0 totalpages: 2075452
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12284 pages used for memmap
[ 0.000000] DMA32 zone: 898464 pages, LIFO batch:31
[ 0.000000] Normal zone: 16037 pages used for memmap
[ 0.000000] Normal zone: 1172992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s84928 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047054
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.0-rc5+ root=/dev/mapper/creabox-creabox_dom0 ro verbose debug loglevel=10 iwlwifi.debug=0xC0800000
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8091496K/8301808K available (8936K kernel code, 1096K rwdata, 3584K rodata, 1140K init, 868K bss, 210312K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2294.839 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.67 BogoMIPS (lpj=9179356)
[ 0.001536] pid_max: default: 32768 minimum: 301
[ 0.001633] Security Framework initialized
[ 0.002415] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005432] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006792] Mount-cache hash table entries: 256
[ 0.007082] Initializing cgroup subsys devices
[ 0.007153] Initializing cgroup subsys freezer
[ 0.007221] Initializing cgroup subsys net_cls
[ 0.007286] Initializing cgroup subsys blkio
[ 0.007374] Initializing cgroup subsys perf_event
[ 0.007467] CPU: Physical Processor ID: 0
[ 0.007536] CPU: Processor Core ID: 0
[ 0.007605] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007605] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.008225] mce: CPU supports 7 MCE banks
[ 0.008307] CPU0: Thermal monitoring enabled (TM1)
[ 0.008386] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.008386] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.008386] tlb_flushall_shift: 1
[ 0.008682] Freeing SMP alternatives memory: 20K (ffffffff82031000 - ffffffff82036000)
[ 0.009342] ACPI: Core revision 20130725
[ 0.016867] ACPI: All ACPI Tables successfully acquired
[ 0.018339] dmar: Host address width 36
[ 0.018407] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.018482] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.018563] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.018633] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.018720] dmar: RMRR base: 0x000000dbe07000 end: 0x000000dbe13fff
[ 0.018786] dmar: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
[ 0.018928] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.018996] HPET id 0 under DRHD base 0xfed91000
[ 0.019260] Enabled IRQ remapping in x2apic mode
[ 0.019327] Enabling x2apic
[ 0.019390] Enabled x2apic
[ 0.019469] Switched APIC routing to cluster x2apic.
[ 0.020000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059729] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.059957] TSC deadline timer enabled
[ 0.060029] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.060343] ... version: 3
[ 0.060407] ... bit width: 48
[ 0.060472] ... generic registers: 4
[ 0.060534] ... value mask: 0000ffffffffffff
[ 0.060601] ... max period: 0000ffffffffffff
[ 0.060665] ... fixed-purpose events: 3
[ 0.060730] ... event mask: 000000070000000f
[ 0.074810] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.061110] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.102449] Brought up 4 CPUs
[ 0.102518] smpboot: Total of 4 processors activated (18358.71 BogoMIPS)
[ 0.106829] devtmpfs: initialized
[ 0.107746] xor: automatically using best checksumming function:
[ 0.146553] avx : 12154.000 MB/sec
[ 0.146691] NET: Registered protocol family 16
[ 0.147058] cpuidle: using governor ladder
[ 0.147127] cpuidle: using governor menu
[ 0.147385] ACPI: bus type PCI registered
[ 0.147455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.147577] dca service started, version 1.12.1
[ 0.147667] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.147756] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.152552] PCI: Using configuration type 1 for base access
[ 0.155592] bio: create slab <bio-0> at 0
[ 0.222552] raid6: sse2x1 4623 MB/s
[ 0.290547] raid6: sse2x2 5727 MB/s
[ 0.358539] raid6: sse2x4 6507 MB/s
[ 0.358607] raid6: using algorithm sse2x4 (6507 MB/s)
[ 0.358675] raid6: using ssse3x2 recovery algorithm
[ 0.358789] ACPI: Added _OSI(Module Device)
[ 0.358858] ACPI: Added _OSI(Processor Device)
[ 0.358924] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.358990] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.360878] ACPI: EC: Look up EC in DSDT
[ 0.362927] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.375169] ACPI: SSDT 00000000dbe1d018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.375823] ACPI: Dynamic OEM Table Load:
[ 0.375979] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.386894] ACPI: SSDT 00000000dbe1ea98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.387591] ACPI: Dynamic OEM Table Load:
[ 0.387746] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.398712] ACPI: SSDT 00000000dbe1fc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.399342] ACPI: Dynamic OEM Table Load:
[ 0.399499] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.411401] ACPI: Interpreter enabled
[ 0.411477] ACPI: (supports S0 S5)
[ 0.411542] ACPI: Using IOAPIC for interrupt routing
[ 0.411646] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.411949] ACPI: No dock devices found.
[ 0.422320] ACPI: Power Resource [FN00] (off)
[ 0.422509] ACPI: Power Resource [FN01] (off)
[ 0.422702] ACPI: Power Resource [FN02] (off)
[ 0.422886] ACPI: Power Resource [FN03] (off)
[ 0.423070] ACPI: Power Resource [FN04] (off)
[ 0.423997] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.424448] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.425202] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.425978] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[ 0.426295] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.426368] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
[ 0.426437] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
[ 0.426506] PCI host bridge to bus 0000:00
[ 0.426570] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.426645] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.426715] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.426785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.426856] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.426927] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.426996] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.427067] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.427138] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.427208] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.427278] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.427354] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.427560] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.427641] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.427720] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.427810] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.428036] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.428132] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 0.428283] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.428427] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.428551] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.428645] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit]
[ 0.428803] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.428989] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.429078] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.429158] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff]
[ 0.429426] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.429515] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.429593] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
[ 0.429671] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.429809] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.429950] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.430075] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.430163] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
[ 0.430335] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.430494] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.430613] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.430706] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[ 0.430857] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.431002] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.431124] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.431323] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.431476] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.431602] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.431802] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.431956] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.432084] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.432176] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
[ 0.432348] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.432513] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.432630] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.432928] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.433019] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.433094] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.433171] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.433245] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.433321] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.433399] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
[ 0.433516] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.433694] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.433780] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
[ 0.433871] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.434167] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.435938] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.436191] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.437028] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.437267] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.443791] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.443868] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.444638] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.445268] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.445992] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.446615] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.447235] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.447872] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.448594] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.449213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.450055] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.450218] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.450355] Found 1 acpi root devices
[ 0.450532] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.450620] vgaarb: loaded
[ 0.450684] vgaarb: bridge control possible 0000:00:02.0
[ 0.450880] SCSI subsystem initialized
[ 0.451001] libata version 3.00 loaded.
[ 0.451092] ACPI: bus type USB registered
[ 0.451185] usbcore: registered new interface driver usbfs
[ 0.451263] usbcore: registered new interface driver hub
[ 0.451372] usbcore: registered new device driver usb
[ 0.451464] pps_core: LinuxPPS API ver. 1 registered
[ 0.451534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.451621] PTP clock support registered
[ 0.451732] wmi: Mapper loaded
[ 0.451811] PCI: Using ACPI for IRQ routing
[ 0.453760] PCI: pci_cache_line_size set to 64 bytes
[ 0.453938] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.454011] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.454076] e820: reserve RAM buffer [mem 0xdb9f1000-0xdbffffff]
[ 0.454145] e820: reserve RAM buffer [mem 0xdc20e000-0xdfffffff]
[ 0.454214] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 0.454283] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.454543] cfg80211: Calling CRDA to update world regulatory domain
[ 0.454917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.455380] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.457476] Switched to clocksource hpet
[ 0.463132] FS-Cache: Loaded
[ 0.463261] CacheFiles: Loaded
[ 0.463339] pnp: PnP ACPI init
[ 0.463417] ACPI: bus type PNP registered
[ 0.463545] pnp 00:00: [dma 4]
[ 0.463639] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.463742] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.463955] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.464086] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.464159] system 00:03: [io 0x1000-0x100f] has been reserved
[ 0.464228] system 00:03: [io 0xffff] has been reserved
[ 0.464297] system 00:03: [io 0xffff] has been reserved
[ 0.464366] system 00:03: [io 0x0400-0x0453] could not be reserved
[ 0.464437] system 00:03: [io 0x0458-0x047f] has been reserved
[ 0.464507] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.464574] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.464644] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.464757] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.464890] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.464964] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.465220] system 00:06: [io 0x0a00-0x0a1f] has been reserved
[ 0.465294] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.465363] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.465431] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465609] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.465680] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.465787] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.465912] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.466311] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.466385] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.466455] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.466526] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.466597] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.466667] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.466738] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.466810] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.466881] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.466949] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.467020] system 00:0a: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.467091] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.467421] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.467493] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[ 0.467562] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.467657] pnp: PnP ACPI: found 12 devices
[ 0.467726] ACPI: bus type PNP unregistered
[ 0.475141] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.475230] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.475303] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.475385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.475452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.475521] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.475590] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.475660] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.475728] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.475797] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.475867] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.475938] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.476008] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.476078] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.476220] NET: Registered protocol family 2
[ 0.476609] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.476958] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.477205] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.477298] TCP: reno registered
[ 0.477380] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.477515] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.477682] NET: Registered protocol family 1
[ 0.477762] pci 0000:00:02.0: Boot video device
[ 0.517628] PCI: CLS 64 bytes, default 64
[ 0.517743] Trying to unpack rootfs image as initramfs...
[ 0.713195] Freeing initrd memory: 9292K (ffff880036dca000 - ffff8800376dd000)
[ 0.713290] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.713382] software IO TLB [mem 0xd79f1000-0xdb9f1000] (64MB) mapped at [ffff8800d79f1000-ffff8800db9f0fff]
[ 0.714296] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 0.714382] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 0.714459] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 0.714537] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 0.714656] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.722296] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.724667] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 0.725085] audit: initializing netlink socket (disabled)
[ 0.725170] type=2000 audit(1381919409.720:1): initialized
[ 0.764821] bounce pool size: 64 pages
[ 0.764895] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.765557] VFS: Disk quotas dquot_6.5.2
[ 0.765655] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.766136] FS-Cache: Netfs 'cifs' registered for caching
[ 0.766256] Key type cifs.spnego registered
[ 0.766334] Key type cifs.idmap registered
[ 0.766406] NTFS driver 2.1.30 [Flags: R/W].
[ 0.766572] fuse init (API version 7.22)
[ 0.766803] bio: create slab <bio-1> at 1
[ 0.767041] Btrfs loaded
[ 0.767117] msgmni has been set to 15821
[ 0.771969] alg: No test for stdrng (krng)
[ 0.778191] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 0.778346] NET: Registered protocol family 38
[ 0.778442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.778524] io scheduler noop registered
[ 0.778589] io scheduler deadline registered
[ 0.778676] io scheduler cfq registered (default)
[ 0.779023] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 0.779346] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.779549] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.779626] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.779717] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.779790] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.779864] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.779950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.780037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.780110] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 0.780195] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 0.780282] cpcihp_generic: not configured, disabling.
[ 0.780361] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.782344] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 0.782465] vmlfb: initializing
[ 0.782693] uvesafb: failed to execute /sbin/v86d
[ 0.782762] uvesafb: make sure that the v86d helper is installed and executable
[ 0.782844] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 0.782914] uvesafb: vbe_init() failed with -22
[ 0.782982] uvesafb: probe of uvesafb.0 failed with error -22
[ 0.783093] vga16fb: initializing
[ 0.783162] vga16fb: mapped to 0xffff8800000a0000
[ 0.876905] Console: switching to colour frame buffer device 80x30
[ 0.884071] fb0: VGA16 VGA frame buffer device
[ 0.884337] intel_idle: MWAIT substates: 0x21120
[ 0.884601] intel_idle: v0.4 model 0x3A
[ 0.884844] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.885304] ipmi message handler version 39.2
[ 0.897423] ipmi device interface
[ 0.909647] IPMI System Interface driver.
[ 0.921705] ipmi_si: Adding default-specified kcs state machine
[ 0.933885] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 0.957489] ipmi_si: Interface detection failed
[ 1.001221] ipmi_si: Adding default-specified smic state machine
[ 1.013173] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 1.036875] ipmi_si: Interface detection failed
[ 1.073223] ipmi_si: Adding default-specified bt state machine
[ 1.085079] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 1.108244] ipmi_si: Interface detection failed
[ 1.137192] ipmi_si: Unable to find any System Interface(s)
[ 1.148731] IPMI Watchdog: driver initialized
[ 1.160205] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 1.182906] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.205218] ACPI: Power Button [PWRB]
[ 1.216553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.239057] ACPI: Power Button [PWRF]
[ 1.250568] ACPI: Fan [FAN0] (off)
[ 1.261799] ACPI: Fan [FAN1] (off)
[ 1.272905] ACPI: Fan [FAN2] (off)
[ 1.283934] ACPI: Fan [FAN3] (off)
[ 1.294869] ACPI: Fan [FAN4] (off)
[ 1.305688] ACPI: Requesting acpi_cpufreq
[ 1.357570] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.368401] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.379332] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.389947] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.400290] GHES: HEST is not enabled!
[ 1.410454] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 1.420796] xenfs: not registering filesystem on non-xen platform
[ 1.431196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.462208] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 1.482955] Non-volatile memory driver v1.3
[ 1.493660] Linux agpgart interface v0.103
[ 1.504000] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.525628] Hangcheck: Using getrawmonotonic().
[ 1.536855] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.593124] [drm] Initialized drm 1.1.0 20060810
[ 1.603659] drm/i810 does not support SMP
[ 1.615035] [drm] Memory usable by graphics device = 2048M
[ 1.625256] checking generic (a0000 10000) vs hw (e0000000 10000000)
[ 1.635551] fb: conflicting fb hw usage inteldrmfb vs VGA16 VGA - removing generic driver
[ 1.675114] Console: switching to colour VGA+ 80x25
[ 1.676074] i915 0000:00:02.0: setting latency timer to 64
[ 1.698942] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.699021] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.699094] [drm] Driver supports precise vblank timestamp query.
[ 1.699296] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.712855] tsc: Refined TSC clocksource calibration: 2294.792 MHz
[ 1.796801] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 1.867013] fbcon: inteldrmfb (fb0) is primary device
[ 2.071325] Console: switching to colour frame buffer device 210x65
[ 2.082442] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.082507] i915 0000:00:02.0: registered panic notifier
[ 2.114221] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.114377] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 2.114493] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.116885] brd: module loaded
[ 2.118046] loop: module loaded
[ 2.118515] nbd: registered device at major 43
[ 2.120637] events: mcg drbd: 7
[ 2.124932] drbd: initialized. Version: 8.4.3 (api:1/proto:86-101)
[ 2.124991] drbd: built-in
[ 2.125018] drbd: registered as block device major 147
[ 2.125239] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.125349] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 2.129492] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 2.129607] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.129702] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 2.129810] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.129899] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 2.130007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.130095] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.130187] Loading iSCSI transport class v2.0-870.
[ 2.130385] hv_vmbus: registering driver hv_storvsc
[ 2.130514] ahci 0000:00:1f.2: version 3.0
[ 2.130730] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 2.130839] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 2.130914] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.130988] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.131807] scsi0 : ahci
[ 2.132053] scsi1 : ahci
[ 2.132258] scsi2 : ahci
[ 2.132422] scsi3 : ahci
[ 2.132549] scsi4 : ahci
[ 2.132673] scsi5 : ahci
[ 2.132755] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 46
[ 2.132822] ata2: DUMMY
[ 2.132847] ata3: DUMMY
[ 2.132874] ata4: DUMMY
[ 2.132898] ata5: DUMMY
[ 2.134650] ata6: DUMMY
[ 2.136479] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 2.138834] eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx)
[ 2.141371] tun: Universal TUN/TAP device driver, 1.6
[ 2.143306] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 2.145363] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.147389] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.149475] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.151597] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.153775] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.155960] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.158343] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.160669] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.163032] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 2.372986] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.375379] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:fa:7b:3c
[ 2.377828] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.380347] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 2.382870] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 2.385422] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 2.388010] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 2.390658] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.393359] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
[ 2.396099] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
[ 2.398862] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
[ 2.401641] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.404418] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 2.407220] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 2.410060] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 2.412837] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 2.415597] libipw: 802.11 data/management/control stack, git-1.1.13
[ 2.418342] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 2.421136] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 2.423933] Copyright(c) 2003-2013 Intel Corporation
[ 2.426980] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.430327] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.433233] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 2.436054] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.438850] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.441652] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 2.444497] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 2.452503] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.455858] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.458608] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.461295] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.464199] ata1.00: supports DRM functions and may not be fully accessible
[ 2.464997] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.465041] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.465254] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
[ 2.465255] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 2.465281] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
[ 2.465282] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 2.465421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.465423] ehci-pci: EHCI PCI platform driver
[ 2.465636] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.465646] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.465754] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.465775] ehci-pci 0000:00:1a.0: debug port 2
[ 2.469688] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.469714] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
[ 2.480470] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.480539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.480541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.480544] usb usb1: Product: EHCI Host Controller
[ 2.480546] usb usb1: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
[ 2.480548] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.480774] hub 1-0:1.0: USB hub found
[ 2.480786] hub 1-0:1.0: 3 ports detected
[ 2.481210] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.481221] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.481331] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.481350] ehci-pci 0000:00:1d.0: debug port 2
[ 2.485244] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.485270] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
[ 2.496454] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.496506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.496509] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.496512] usb usb2: Product: EHCI Host Controller
[ 2.496514] usb usb2: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
[ 2.496516] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.496726] hub 2-0:1.0: USB hub found
[ 2.496735] hub 2-0:1.0: 3 ports detected
[ 2.496993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.496994] ohci-pci: OHCI PCI platform driver
[ 2.497014] ohci-platform: OHCI generic platform driver
[ 2.497030] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.589492] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.592122] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.592171] ata1.00: ATA-9: Crucial_CT120M500SSD3, MU03, max UDMA/133
[ 2.592173] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.599969] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.600033] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.600158] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.600196] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X
[ 2.600307] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.600310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.600312] usb usb3: Product: xHCI Host Controller
[ 2.600315] usb usb3: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
[ 2.600317] usb usb3: SerialNumber: 0000:00:14.0
[ 2.600562] hub 3-0:1.0: USB hub found
[ 2.600578] hub 3-0:1.0: 4 ports detected
[ 2.601291] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.601399] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.601465] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.601468] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.601471] usb usb4: Product: xHCI Host Controller
[ 2.601473] usb usb4: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
[ 2.601475] usb usb4: SerialNumber: 0000:00:14.0
[ 2.601684] hub 4-0:1.0: USB hub found
[ 2.601698] hub 4-0:1.0: 4 ports detected
[ 2.650369] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.652800] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.655517] ata1.00: supports DRM functions and may not be fully accessible
[ 2.664320] ata1.00: configured for UDMA/133
[ 2.664523] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.669265] scsi 0:0:0:0: Direct-Access ATA Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
[ 2.671813] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.671854] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.676599] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.679018] sd 0:0:0:0: [sda] Write Protect is off
[ 2.681377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.683735] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.686534] sda: sda1
[ 2.689465] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.816675] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.703071] i8042: No controller found
[ 3.705621] Switched to clocksource tsc
[ 3.705657] mousedev: PS/2 mouse device common for all mice
[ 3.705834] rtc_cmos 00:04: RTC can wake from S4
[ 3.705976] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.706015] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.706202] i2c /dev entries driver
[ 3.706733] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
[ 3.706735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.706846] pps_ldisc: PPS line discipline registered
[ 3.707246] w83627ehf: Found NCT6776F chip at 0xa30
[ 3.707928] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.707974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.707999] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.708060] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.708065] iTCO_vendor_support: vendor-support=0
[ 3.708097] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 3.746350] device-mapper: uevent: version 1.0.3
[ 3.749218] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@xxxxxxxxxx
[ 3.752097] Intel P-state driver initializing.
[ 3.754889] Intel pstate controlling: cpu 0
[ 3.756677] Intel pstate controlling: cpu 1
[ 3.758405] Intel pstate controlling: cpu 2
[ 3.760152] Intel pstate controlling: cpu 3
[ 3.761873] leds_ss4200: no LED devices found
[ 3.763547] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.765309] usbcore: registered new interface driver usbhid
[ 3.766975] usbhid: USB HID core driver
[ 3.768653] hv_utils: Registering HyperV Utility Driver
[ 3.770305] hv_vmbus: registering driver hv_util
[ 3.772001] drop_monitor: Initializing network drop monitor service
[ 3.773666] GACT probability on
[ 3.775301] Mirror/redirect action on
[ 3.776954] Simple TC action Loaded
[ 3.778649] netem: version 1.3
[ 3.780275] u32 classifier
[ 3.781860] Performance counters on
[ 3.783447] input device check on
[ 3.785054] Actions configured
[ 3.786633] Netfilter messages via NETLINK v0.30.
[ 3.788252] nfnl_acct: registering with nfnetlink.
[ 3.789849] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.791541] ctnetlink v0.93: registering with nfnetlink.
[ 3.793225] xt_time: kernel timezone is -0000
[ 3.794824] ip_set: protocol 6
[ 3.796435] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 3.798070] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 3.799722] IPVS: Creating netns size=2048 id=0
[ 3.801342] IPVS: ipvs loaded.
[ 3.802950] IPVS: [rr] scheduler registered.
[ 3.804546] IPVS: [wrr] scheduler registered.
[ 3.806130] IPVS: [lc] scheduler registered.
[ 3.807694] IPVS: [wlc] scheduler registered.
[ 3.809251] IPVS: [lblc] scheduler registered.
[ 3.810795] IPVS: [lblcr] scheduler registered.
[ 3.812317] IPVS: [dh] scheduler registered.
[ 3.813819] IPVS: [sh] scheduler registered.
[ 3.815300] IPVS: [sed] scheduler registered.
[ 3.815781] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.818330] IPVS: [nq] scheduler registered.
[ 3.819921] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.821455] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 3.822963] arp_tables: (C) 2002 David S. Miller
[ 3.824472] TCP: cubic registered
[ 3.825953] Initializing XFRM netlink socket
[ 3.827433] NET: Registered protocol family 17
[ 3.828919] NET: Registered protocol family 15
[ 3.830417] Bridge firewalling registered
[ 3.831891] Ebtables v2.0 registered
[ 3.867990] NET: Registered protocol family 33
[ 3.869471] Key type rxrpc registered
[ 3.870904] Key type rxrpc_s registered
[ 3.872346] 8021q: 802.1Q VLAN Support v1.8
[ 3.873705] lib80211: common routines for IEEE802.11 drivers
[ 3.875045] lib80211_crypt: registered algorithm 'NULL'
[ 3.876382] lib80211_crypt: registered algorithm 'WEP'
[ 3.877694] lib80211_crypt: registered algorithm 'CCMP'
[ 3.878981] lib80211_crypt: registered algorithm 'TKIP'
[ 3.880260] Key type dns_resolver registered
[ 3.882094] registered taskstats version 1
[ 3.883857] console [netcon0] enabled
[ 3.885161] netconsole: network logging started
[ 3.886491] rtc_cmos 00:04: setting system clock to 2013-10-16 10:30:13 UTC (1381919413)
[ 3.887744] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.888943] EDD information not available.
[ 3.891350] Freeing unused kernel memory: 1140K (ffffffff81f14000 - ffffffff82031000)
[ 3.892609] Write protecting the kernel read-only data: 14336k
[ 3.897024] Freeing unused kernel memory: 1292K (ffff8800018bd000 - ffff880001a00000)
[ 3.899556] Freeing unused kernel memory: 512K (ffff880001d80000 - ffff880001e00000)
[ 3.914628] udevd[192]: starting version 175
[ 3.948117] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.949901] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.952282] hub 1-1:1.0: USB hub found
[ 3.954113] hub 1-1:1.0: 6 ports detected
[ 3.997492] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 3.999688] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
[ 4.001257] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 4.003021] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[ 4.004477] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 4.006140] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
[ 4.007539] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 4.009342] microcode: CPU3 updated to revision 0x19, date = 2013-06-13
[ 4.025536] bio: create slab <bio-2> at 2
[ 4.067654] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.074689] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.197809] udevd[508]: starting version 175
[ 4.199871] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.201662] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.203638] hub 2-1:1.0: USB hub found
[ 4.205480] hub 2-1:1.0: 8 ports detected
[ 4.279569] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 4.376413] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
[ 4.378134] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.479473] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[ 4.525283] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.555505] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
[ 4.577289] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c517
[ 4.579163] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.581377] usb 2-1.5: Product: USB Receiver
[ 4.583491] usb 2-1.5: Manufacturer: Logitech
[ 4.588498] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
[ 4.590628] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
[ 4.597962] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 4.600575] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input4
[ 4.602925] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
[ 4.768204] Adding 1949692k swap on /dev/mapper/creabox-creabox_swap. Priority:-1 extents:1 across:1949692k SS
[ 4.935559] device eth0 entered promiscuous mode
[ 5.072086] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 5.175225] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 6.748411] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.753345] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 6.758045] xen_bridge: port 1(eth0) entered forwarding state
[ 6.762737] xen_bridge: port 1(eth0) entered forwarding state
[ 476.229087] cfg80211: Pending regulatory request, waiting for it to be processed...
[ 488.454905] cfg80211: Pending regulatory request, waiting for it to be processed...
Wiphy phy0
Band 1:
Capabilities: 0x1072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT TX/RX MCS rate indexes supported: 0-15, 32
Frequencies:
* 2412 MHz [1] (15.0 dBm)
* 2417 MHz [2] (15.0 dBm)
* 2422 MHz [3] (15.0 dBm)
* 2427 MHz [4] (15.0 dBm)
* 2432 MHz [5] (15.0 dBm)
* 2437 MHz [6] (15.0 dBm)
* 2442 MHz [7] (15.0 dBm)
* 2447 MHz [8] (15.0 dBm)
* 2452 MHz [9] (15.0 dBm)
* 2457 MHz [10] (15.0 dBm)
* 2462 MHz [11] (15.0 dBm)
* 2467 MHz [12] (15.0 dBm) (passive scanning, no IBSS)
* 2472 MHz [13] (15.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x1072
HT20/HT40
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT TX/RX MCS rate indexes supported: 0-15, 32
Frequencies:
* 5180 MHz [36] (15.0 dBm) (passive scanning, no IBSS)
* 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)
* 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)
* 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)
* 5260 MHz [52] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5500 MHz [100] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5520 MHz [104] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5540 MHz [108] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5560 MHz [112] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5580 MHz [116] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5600 MHz [120] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5620 MHz [124] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5640 MHz [128] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5660 MHz [132] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5680 MHz [136] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5700 MHz [140] (15.0 dBm) (passive scanning, no IBSS, radar detection)
* 5745 MHz [149] (15.0 dBm) (passive scanning, no IBSS)
* 5765 MHz [153] (15.0 dBm) (passive scanning, no IBSS)
* 5785 MHz [157] (15.0 dBm) (passive scanning, no IBSS)
* 5805 MHz [161] (15.0 dBm) (passive scanning, no IBSS)
* 5825 MHz [165] (15.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 20
max scan IEs length: 195 bytes
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP } <= 1,
total <= 2, #channels <= 1, STA/AP BI must match
* #{ managed } <= 2,
total <= 2, #channels <= 1
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* new_mpath
* set_mesh_params
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* action
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* Unknown command (84)
* Unknown command (87)
* Unknown command (85)
* Unknown command (89)
* Unknown command (92)
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* Unknown mode (10): 0x40 0xd0
Device supports RSN-IBSS.
WoWLAN support:
* wake up on disconnect
* wake up on magic packet
* wake up on pattern match, up to 20 patterns of 16-128 bytes
* can do GTK rekeying
* wake up on GTK rekey failure
* wake up on EAP identity request
* wake up on rfkill release
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
