Hi Matt, no suggestions. I was able to reproduce same issue yesterday on ath9k_htc. But currently no time to digg in it. Am 08.10.2013 17:41, schrieb Matt Chen: > No one has any suggestion and comment ? > > 2013/10/8 Matt Chen <machen@xxxxxxxx>: >> Hi list, >> >> I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My >> wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch >> with most recent commit. >> >> The my_p2p_supplicant.conf for my wpa_supplicant is : >> ======================================= >> ctrl=/var/run/wpa_supplicant >> update_config=1 >> >> device_name=HP GO >> device_type=1-0050F204-2 >> >> p2p_go_ht40=1 >> >> ========================================= >> >> I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211 >> -ddt -f /var/log/wpa_supplicant -B >> >> I use wpa_cli to work on P2P. So here goes my case: >> >> M#1 >> p2p_find >> p2p_stop >> p2p_peers >> p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7 >> >> M#2 >> p2p_find >> p2p_stop >> p2p_peers >> p2p_connect [M#1 MAC ADDRESS] pbc >> >> >> Then I can find the M#1 become the P0 GO mode and M#2 become station >> mode. And each status is completed. But after that, I set each machine >> with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am >> not able to ping each IP. >> >> Is there anything I am doing wrong ? >> >> Thank you. > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Regards, Oleksij -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
