No one has any suggestion and comment ? 2013/10/8 Matt Chen <machen@xxxxxxxx>: > Hi list, > > I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My > wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch > with most recent commit. > > The my_p2p_supplicant.conf for my wpa_supplicant is : > ======================================= > ctrl=/var/run/wpa_supplicant > update_config=1 > > device_name=HP GO > device_type=1-0050F204-2 > > p2p_go_ht40=1 > > ========================================= > > I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211 > -ddt -f /var/log/wpa_supplicant -B > > I use wpa_cli to work on P2P. So here goes my case: > > M#1 > p2p_find > p2p_stop > p2p_peers > p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7 > > M#2 > p2p_find > p2p_stop > p2p_peers > p2p_connect [M#1 MAC ADDRESS] pbc > > > Then I can find the M#1 become the P0 GO mode and M#2 become station > mode. And each status is completed. But after that, I set each machine > with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am > not able to ping each IP. > > Is there anything I am doing wrong ? > > Thank you. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html