Added Franky...
On Wed, Jun 12, 2013 at 06:21:23PM -0400, Jason Cooper wrote:
> All,
>
> I have a Seagate Wireless Plus I am trying to put a vanilla kernel on
> (currently v3.10-rc5 for various omap DT bits).
>
> I have the board booting and running a debian rootfs on the HD. I just
> got mmc to come up and I've discovered that the wireless card is vendor
> 0x02d0, device 0x4319.
>
> My hope, once I got to this point, was that I would be able to use
> the mainline, open source driver. Unfortunately, it looks like brcmfmac
> lost support for the 0x4319 while it was in staging.
>
> The commit in question is:
>
> 4dad253 staging: brcm80211: remove code for unsupported chip
>
> Is adding it back in a bridge too far?
It looks like only two things are needed, adding the chip id and then
setting the addresses. Here's a preliminary patch to do just that.
Note, the addresses I have used are a straight copy from the 4329. It
causes this:
[ 12.346466] mmcblk mmc0:0001: no of_node; not parsing pinctrl DT
[ 12.353149] brcmfmac_sdio mmc0:0001:1: no of_node; not parsing pinctrl DT
[ 12.360717] brcmfmac_sdio mmc0:0001:2: no of_node; not parsing pinctrl DT
[ 12.368804] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4319 rev 1 pmurev 7
[ 12.380462] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=03, Err: -22
[ 12.391906] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=03, Err: -22
[ 12.403289] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=03, Err: -22
[ 12.412261] brcmfmac: brcmf_sdio_regrw_helper: failed with -22
[ 12.418457] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=01, Err: -22
[ 12.429718] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=01, Err: -22
[ 12.441101] brcmfmac: brcmf_sdioh_request_byte: Failed to write byte F0:@0x00408=01, Err: -22
[ 12.450073] brcmfmac: brcmf_sdio_regrw_helper: failed with -22
I've taken a quick look at aosp, the provided GPL broadcom code, and I
haven't seen anything for the 4319 wrt to addresses. How hard would it
be to get those addresses from you guys?
thx,
Jason.
----8<------
commit 8fa440e8d6da21c95cdbc9c1ced76d5962cd9e3d
Author: Jason Cooper <jason@xxxxxxxxxxxxxx>
Date: Mon Jun 17 15:30:43 2013 +0000
net: brcmfmac: add sdio chip id 0x4319
Signed-off-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 44fa0cd..75ddc2b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -43,6 +43,7 @@
#define SDIO_DEVICE_ID_BROADCOM_43143 43143
#define SDIO_DEVICE_ID_BROADCOM_43241 0x4324
+#define SDIO_DEVICE_ID_BROADCOM_4319 0x4319
#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329
#define SDIO_DEVICE_ID_BROADCOM_4330 0x4330
#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334
@@ -55,6 +56,7 @@
static const struct sdio_device_id brcmf_sdmmc_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4319)},
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index d248751..68816ec 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3551,6 +3551,8 @@ static bool brcmf_sdbrcm_chipmatch(u16 chipid)
return true;
if (chipid == BCM43241_CHIP_ID)
return true;
+ if (chipid == BCM4319_CHIP_ID)
+ return true;
if (chipid == BCM4329_CHIP_ID)
return true;
if (chipid == BCM4330_CHIP_ID)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index ca72177..4336dbb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -31,6 +31,15 @@
#include "sdio_chip.h"
/* chip core base & ramsize */
+/* bcm4319 */
+/* SDIO device core, ID 0x829 */
+#define BCM4319_CORE_BUS_BASE 0x18011000
+/* internal memory core, ID 0x80e */
+#define BCM4319_CORE_SOCRAM_BASE 0x18003000
+/* ARM Cortex M3 core, ID 0x82a */
+#define BCM4319_CORE_ARM_BASE 0x18002000
+#define BCM4319_RAMSIZE 0x48000
+
/* bcm4329 */
/* SDIO device core, ID 0x829 */
#define BCM4329_CORE_BUS_BASE 0x18011000
@@ -484,6 +493,15 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
ci->c_inf[3].cib = 0x07004211;
ci->ramsize = 0x90000;
break;
+ case BCM4319_CHIP_ID:
+ ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
+ ci->c_inf[1].base = BCM4319_CORE_BUS_BASE;
+ ci->c_inf[2].id = BCMA_CORE_INTERNAL_MEM;
+ ci->c_inf[2].base = BCM4319_CORE_SOCRAM_BASE;
+ ci->c_inf[3].id = BCMA_CORE_ARM_CM3;
+ ci->c_inf[3].base = BCM4319_CORE_ARM_BASE;
+ ci->ramsize = BCM4319_RAMSIZE;
+ break;
case BCM4329_CHIP_ID:
ci->c_inf[1].id = BCMA_CORE_SDIO_DEV;
ci->c_inf[1].base = BCM4329_CORE_BUS_BASE;
diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
index c1fe245..c2434db 100644
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -36,6 +36,7 @@
#define BCM43236_CHIP_ID 43236
#define BCM43238_CHIP_ID 43238
#define BCM43241_CHIP_ID 0x4324
+#define BCM4319_CHIP_ID 0x4319
#define BCM4329_CHIP_ID 0x4329
#define BCM4330_CHIP_ID 0x4330
#define BCM4331_CHIP_ID 0x4331
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
