Search Linux Wireless

Re: very bad work of wl (bcm 43228)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2013/4/19 Arend van Spriel <arend@xxxxxxxxxxxx>:
> I have no quick solution so need to more detailed info. For these kind of
> questions it always helps to provide kernel log and output from commands
> like lspci and lsusb.


Now i'm sometimes not able ping my wifi hot spot (only on 43228, on
4311 all works fine with b43 driver)
lspci:
03:00.0 0280: 14e4:4359
        Subsystem: 105b:e04b
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at c0500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
        Capabilities: [58] Vendor Specific Information: Len=78 <?>
        Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [d0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [13c] Virtual Channel
        Capabilities: [160] Device Serial Number 00-00-b9-ff-ff-fc-08-ed
        Capabilities: [16c] Power Budgeting <?>
        Kernel driver in use: wl
        Kernel modules: wl


Some logs from kernel and ping in attached file. I'm try to send this
email ten times, becouse wifi very bad work's with this driver =(

--
Vasiliy Tolstov,
e-mail: v.tolstov@xxxxxxxxx
jabber: vase@xxxxxxxxx

Attachment: wifi
Description: Binary data


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux