Search Linux Wireless

[PATCH] b43: use bcma_pmu_spuravoid_pllupdate()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do not implement this in b43, but use bcma_pmu_spuravoid_pllupdate().

Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
 drivers/net/wireless/b43/phy_n.c |   92 ++++++++------------------------------
 1 file changed, 18 insertions(+), 74 deletions(-)

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3c35382..4130c04 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -5101,76 +5101,6 @@ static void b43_chantab_phy_upload(struct b43_wldev *dev,
 	b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PmuSpurAvoid */
-static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
-{
-	struct bcma_drv_cc __maybe_unused *cc;
-	u32 __maybe_unused pmu_ctl;
-
-	switch (dev->dev->bus_type) {
-#ifdef CONFIG_B43_BCMA
-	case B43_BUS_BCMA:
-		cc = &dev->dev->bdev->bus->drv_cc;
-		if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
-			if (avoid) {
-				bcma_chipco_pll_write(cc, 0x0, 0x11500010);
-				bcma_chipco_pll_write(cc, 0x1, 0x000C0C06);
-				bcma_chipco_pll_write(cc, 0x2, 0x0F600a08);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x2001E920);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			} else {
-				bcma_chipco_pll_write(cc, 0x0, 0x11100010);
-				bcma_chipco_pll_write(cc, 0x1, 0x000c0c06);
-				bcma_chipco_pll_write(cc, 0x2, 0x03000a08);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			}
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
-		} else if (dev->dev->chip_id == 0x4716) {
-			if (avoid) {
-				bcma_chipco_pll_write(cc, 0x0, 0x11500060);
-				bcma_chipco_pll_write(cc, 0x1, 0x080C0C06);
-				bcma_chipco_pll_write(cc, 0x2, 0x0F600000);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x2001E924);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			} else {
-				bcma_chipco_pll_write(cc, 0x0, 0x11100060);
-				bcma_chipco_pll_write(cc, 0x1, 0x080c0c06);
-				bcma_chipco_pll_write(cc, 0x2, 0x03000000);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			}
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD |
-				  BCMA_CC_PMU_CTL_NOILPONW;
-		} else if (dev->dev->chip_id == 0x4322 ||
-			   dev->dev->chip_id == 0x4340 ||
-			   dev->dev->chip_id == 0x4341) {
-			bcma_chipco_pll_write(cc, 0x0, 0x11100070);
-			bcma_chipco_pll_write(cc, 0x1, 0x1014140a);
-			bcma_chipco_pll_write(cc, 0x5, 0x88888854);
-			if (avoid)
-				bcma_chipco_pll_write(cc, 0x2, 0x05201828);
-			else
-				bcma_chipco_pll_write(cc, 0x2, 0x05001828);
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
-		} else {
-			return;
-		}
-		bcma_cc_set32(cc, BCMA_CC_PMU_CTL, pmu_ctl);
-		break;
-#endif
-#ifdef CONFIG_B43_SSB
-	case B43_BUS_SSB:
-		/* FIXME */
-		break;
-#endif
-	}
-}
-
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ChanspecSetup */
 static void b43_nphy_channel_setup(struct b43_wldev *dev,
 				const struct b43_phy_n_sfo_cfg *e,
@@ -5220,19 +5150,33 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev,
 
 	if (dev->phy.rev >= 3 &&
 	    dev->phy.n->spur_avoid != B43_SPUR_AVOID_DISABLE) {
-		bool avoid = false;
+		struct bcma_drv_cc __maybe_unused *cc;
+		int avoid = 0;
+
 		if (dev->phy.n->spur_avoid == B43_SPUR_AVOID_FORCE) {
-			avoid = true;
+			avoid = 1;
 		} else if (!b43_channel_type_is_40mhz(phy->channel_type)) {
 			if ((ch >= 5 && ch <= 8) || ch == 13 || ch == 14)
-				avoid = true;
+				avoid = 1;
 		} else { /* 40MHz */
 			if (nphy->aband_spurwar_en &&
 			    (ch == 38 || ch == 102 || ch == 118))
 				avoid = dev->dev->chip_id == 0x4716;
 		}
 
-		b43_nphy_pmu_spur_avoid(dev, avoid);
+		switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+		case B43_BUS_BCMA:
+			cc = &dev->dev->bdev->bus->drv_cc;
+			bcma_pmu_spuravoid_pllupdate(cc, avoid);
+			break;
+#endif
+#ifdef CONFIG_B43_SSB
+		case B43_BUS_SSB:
+			/* FIXME */
+			break;
+#endif
+		}
 
 		if (dev->dev->chip_id == 43222 || dev->dev->chip_id == 43224 ||
 		    dev->dev->chip_id == 43225) {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux