HT-PHY was found only on BCM4331 which is a BCMA-based chipset. This is
reallly unlikely we will ever see HT-PHY on SSB thus make the whole code
BCMA specific. This will allow us to call various BCMA-specific
functions directly (without extra checks).
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
V2: just rebase
---
drivers/net/wireless/b43/Kconfig | 2 +-
drivers/net/wireless/b43/phy_ht.c | 5 +++++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 287c6b6..d406cec 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -131,7 +131,7 @@ config B43_PHY_LP
config B43_PHY_HT
bool "Support for HT-PHY (high throughput) devices"
- depends on B43
+ depends on B43 && B43_BCMA
---help---
Support for the HT-PHY.
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 7416c5e..3719a88 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -346,6 +346,11 @@ static int b43_phy_ht_op_init(struct b43_wldev *dev)
u16 tmp;
u16 clip_state[3];
+ if (dev->dev->bus_type != B43_BUS_BCMA) {
+ b43err(dev->wl, "HT-PHY is supported only on BCMA bus!\n");
+ return -EOPNOTSUPP;
+ }
+
b43_phy_ht_tables_init(dev);
b43_phy_mask(dev, 0x0be, ~0x2);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
