I'm leaving it under staging/ for now, unless I'm told otherwise. Signed-off-by: Solomon Peachy <pizza@xxxxxxxxxxxx> --- drivers/staging/cw1200/Kconfig | 116 ++++++++++++++++++++++++++++++++++++++++ drivers/staging/cw1200/Makefile | 23 ++++++++ 2 files changed, 139 insertions(+) create mode 100644 drivers/staging/cw1200/Kconfig create mode 100644 drivers/staging/cw1200/Makefile diff --git a/drivers/staging/cw1200/Kconfig b/drivers/staging/cw1200/Kconfig new file mode 100644 index 0000000..07bebb0 --- /dev/null +++ b/drivers/staging/cw1200/Kconfig @@ -0,0 +1,116 @@ +config CW1200 + tristate "CW1200 WLAN support" + select MAC80211 + select CFG80211 + help + + This is an experimental driver for the cw1100/1200 WLAN chipset. + This option just enables the driver core, see below for specific + platform support. + +if CW1200 + +config CW1200_WLAN_SDIO + tristate "Support SDIO platforms" + depends on CW1200 && MMC + +config CW1200_WLAN_SPI + tristate "Support SPI platforms" + select CW1200_USE_GPIO_IRQ + depends on CW1200 && SPI + +config CW1200_NON_POWER_OF_TWO_BLOCKSIZES + bool "Platform supports non-power-of-two SDIO transfer" + depends on CW1200_SDIO + help + Say N here only if you are running the driver on a platform + which does not have support for non-power-of-two SDIO transfer. + If unsure, say Y. + +config CW1200_SDIO_CMD53_WORKAROUND + bool "Workaround for 512-byte CMD53 transfers" + depends on CW1200_SDIO + help + Say Y here if you are using a kernel older than 3.2-rc2 or + did not apply 300-cw1200_sdio_quirk.diff to the kernel tree. + If unsure, say Y. + +config CW1200_USE_GPIO_IRQ + bool "Use GPIO interrupt" + depends on CW1200_SDIO + help + Say Y here if you want to include GPIO IRQ support instead of + SDIO IRQ. Note that you will be limited to 1-bit SDIO operation. + If unsure, say N. + +config CW1200_5GHZ_SUPPORT + bool "5GHz band support" + depends on CW1200 + help + Say Y if your device supports 5GHz band. Should be disabled for + CW1100 silicon. + If unsure, say N. + +config CW1200_WAPI_SUPPORT + bool "WAPI support" + depends on CW1200 + help + Say Y if your compat-wireless support WAPI. + If unsure, say N. + +config CW1200_PM + bool "Enable CW1200 advanced power management" + depends on CW1200 && PM + +config CW1200_USE_STE_EXTENSIONS + bool "STE extensions" + depends on CW1200 + help + Say Y if you want to include STE extensions. + If unsure, say N. + +menu "Driver debug features" + depends on CW1200 + +config CW1200_DEBUGFS + bool "Expose driver internals to DebugFS (DEVELOPMENT)" + +config CW1200_BH_DEBUG + bool "Enable low-level device communication logs (DEVELOPMENT)" + +config CW1200_WSM_DEBUG + bool "Enable WSM API debug messages (DEVELOPMENT)" + +config CW1200_WSM_DUMPS + bool "Verbose WSM API logging (DEVELOPMENT)" + +config CW1200_WSM_DUMPS_SHORT + bool "Dump only first x bytes (default 20) (DEVELOPMENT)" + +config CW1200_TXRX_DEBUG + bool "Enable TX/RX debug messages (DEVELOPMENT)" + +config CW1200_TX_POLICY_DEBUG + bool "Enable TX policy debug (DEVELOPMENT)" + +config CW1200_STA_DEBUG + bool "Enable STA/AP debug (DEVELOPMENT)" + +config CW1200_ETF + bool "Enable CW1200 Engineering Test Framework hooks" + +config CW1200_POLL_IRQ + bool "Poll for data to work around irq delivery bugs" + help + You should say Y if you have an iMX51-based board with a Freescale + Kernel, and possibly others. Otherwise say N. + +config CW1200_ITP + bool "Enable ITP DebugFS" + help + Say Y if you want to include ITP code. + If unsure, say N. + +endmenu + +endif diff --git a/drivers/staging/cw1200/Makefile b/drivers/staging/cw1200/Makefile new file mode 100644 index 0000000..2d5e8ad --- /dev/null +++ b/drivers/staging/cw1200/Makefile @@ -0,0 +1,23 @@ +cw1200_core-y := \ + fwio.o \ + txrx.o \ + main.o \ + queue.o \ + hwio.o \ + bh.o \ + wsm.o \ + sta.o \ + ap.o \ + scan.o +cw1200_core-$(CONFIG_CW1200_DEBUGFS) += debug.o +cw1200_core-$(CONFIG_CW1200_ITP) += itp.o +cw1200_core-$(CONFIG_CW1200_PM) += pm.o + +cw1200_wlan_sdio-y := cw1200_sdio.o +cw1200_wlan_spi-y := cw1200_spi.o + +obj-$(CONFIG_CW1200) += cw1200_core.o +obj-$(CONFIG_CW1200_WLAN_SDIO) += cw1200_wlan_sdio.o +obj-$(CONFIG_CW1200_WLAN_SPI) += cw1200_wlan_spi.o + + -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
