On Thursday, December 13, 2012 12:45:56 AM Richard Röjfors wrote: > I've been playing with an rtl8192 the last days, I want it to act as an > access point. It's connected to an ARM9 box. > > I'm using the latest compat-wireless, with some additional patches for > beacon support. > > My hostapd conf looks like this: > interface=wlan0 > ssid=Test > driver=nl80211 > hw_mode=b > channel=6 > dtim_period=1 > > It almost works. Running hostapd and the networks shows up for my other > machine, which can connect to the network. > > I also get dhcp-requests through and corresponding dhcp responses. But > then the oddness starts. ARP requests sent from the client is received > on the AP side, the IP stack returns an ARP response, and I see it > beeing sent by _rtl_submit_tx_urb and usb_submit_urb returns 0. But > nothing is received on the other end. > Sometimes, very rarely a response can get through, maybe 1 of 100 or so, > or even less. What's your client? Does it switch to power save mode after DHCP response and is it an 11n client as well [same device? different device/driver - yes I know you haven't enabled 11n, but still.]? Regards, Chr -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
