[PATCH 2/8] ath9k_hw: Fix PAPRD training

[Sujith Manoharan <sujith@xxxxxxxxxxx>]

From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>

The PAPRD training control registers have to be
programmed with values that depend on the chip. This patch
ensures that the correct values are chosen for the chip
in use.

Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 36 +++++++++++++++++++++------
 1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 0ed3846..df9158f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -204,7 +204,20 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah)
 		      AR_PHY_PAPRD_TRAINER_CNTL1_CF_PAPRD_AGC2_SETTLING, 28);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL1,
 		      AR_PHY_PAPRD_TRAINER_CNTL1_CF_CF_PAPRD_TRAIN_ENABLE, 1);
-	val = AR_SREV_9462(ah) ? 0x91 : 147;
+
+	if (AR_SREV_9485(ah)) {
+		val = 148;
+	} else {
+		if (IS_CHAN_2GHZ(ah->curchan)) {
+			if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
+				val = 145;
+			else
+				val = 147;
+		} else {
+			val = 137;
+		}
+	}
+
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL2,
 		      AR_PHY_PAPRD_TRAINER_CNTL2_CF_PAPRD_INIT_RX_BB_GAIN, val);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
@@ -215,15 +228,24 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah)
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_NUM_CORR_STAGES, 7);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_MIN_LOOPBACK_DEL, 1);
-	if (AR_SREV_9485(ah) || AR_SREV_9462(ah) || AR_SREV_9550(ah))
+
+	if (AR_SREV_9485(ah) ||
+	    AR_SREV_9462(ah) ||
+	    AR_SREV_9565(ah) ||
+	    AR_SREV_9550(ah) ||
+	    AR_SREV_9330(ah) ||
+	    AR_SREV_9340(ah))
 		REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
-			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
-			      -3);
+			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, -3);
 	else
 		REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
-			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
-			      -6);
-	val = AR_SREV_9462(ah) ? -10 : -15;
+			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, -6);
+
+	val = -10;
+
+	if (IS_CHAN_2GHZ(ah->curchan) && !AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+		val = -15;
+
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_ADC_DESIRED_SIZE,
 		      val);
-- 
1.8.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html