Add access routines to:
get/set local link-specific power mode (STA)
get remote STA's link-specific power mode (STA)
get remote STA's non-peer power mode (STA)
get/set default mesh power mode (mesh config)
get/set mesh awake window duration (mesh config)
All config changes may be done at mesh runtime and take effect immediately.
Signed-off-by: Marco Porsch <marco@xxxxxxxxxxx>
Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@xxxxxxxxx>
Signed-off-by: Mike Krinkin <krinkin.m.u@xxxxxxxxx>
---
include/uapi/linux/nl80211.h | 12 ++++++++++++
net/wireless/nl80211.c | 43 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 78e37ad..9d04576 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1303,6 +1303,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
*
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ * defined in &enum nl80211_mesh_power_mode.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1570,6 +1573,8 @@ enum nl80211_attrs {
NL80211_ATTR_CENTER_FREQ1,
NL80211_ATTR_CENTER_FREQ2,
+ NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1824,6 +1829,10 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
* @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
* @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ * non-peer STA
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -1848,6 +1857,9 @@ enum nl80211_sta_info {
NL80211_STA_INFO_STA_FLAGS,
NL80211_STA_INFO_BEACON_LOSS,
NL80211_STA_INFO_T_OFFSET,
+ NL80211_STA_INFO_LOCAL_PM,
+ NL80211_STA_INFO_PEER_PM,
+ NL80211_STA_INFO_NONPEER_PM,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index dd179ad..f7945d0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3029,6 +3029,18 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq,
nla_put_u32(msg, NL80211_STA_INFO_BEACON_LOSS,
sinfo->beacon_loss_count))
goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_LOCAL_PM) &&
+ nla_put_u8(msg, NL80211_STA_INFO_LOCAL_PM,
+ sinfo->local_pm))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_PEER_PM) &&
+ nla_put_u8(msg, NL80211_STA_INFO_PEER_PM,
+ sinfo->peer_pm))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_NONPEER_PM) &&
+ nla_put_u8(msg, NL80211_STA_INFO_NONPEER_PM,
+ sinfo->nonpeer_pm))
+ goto nla_put_failure;
if (sinfo->filled & STATION_INFO_BSS_PARAM) {
bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM);
if (!bss_param)
@@ -3238,6 +3250,17 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
params.plink_state =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]);
+ if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) {
+ enum nl80211_mesh_power_mode pm = nla_get_u8(
+ info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]);
+
+ if (pm <= NL80211_MESH_POWER_UNKNOWN ||
+ pm > NL80211_MESH_POWER_MAX)
+ return -EINVAL;
+
+ params.local_pm = pm;
+ }
+
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
@@ -3245,6 +3268,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
/* disallow mesh-specific things */
if (params.plink_action)
return -EINVAL;
+ if (params.local_pm)
+ err = -EINVAL;
/* TDLS can't be set, ... */
if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
@@ -3287,6 +3312,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (params.listen_interval >= 0)
return -EINVAL;
+ if (params.local_pm)
+ err = -EINVAL;
/* reject any changes other than AUTHORIZED */
if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
return -EINVAL;
@@ -3908,7 +3935,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
cur_params.dot11MeshHWMProotInterval) ||
nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
- cur_params.dot11MeshHWMPconfirmationInterval))
+ cur_params.dot11MeshHWMPconfirmationInterval) ||
+ nla_put_u8(msg, NL80211_MESHCONF_POWER_MODE,
+ cur_params.power_mode) ||
+ nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW,
+ cur_params.dot11MeshAwakeWindowDuration))
goto nla_put_failure;
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
@@ -3947,6 +3978,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U8 },
+ [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 },
};
static const struct nla_policy
@@ -4074,6 +4107,14 @@ do { \
1, 65535, mask,
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, power_mode,
+ NL80211_MESH_POWER_ACTIVE,
+ NL80211_MESH_POWER_DEEP_SLEEP,
+ mask, NL80211_MESHCONF_POWER_MODE,
+ nla_get_u8);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration,
+ 0, 65535, mask,
+ NL80211_MESHCONF_AWAKE_WINDOW, nla_get_u16);
if (mask_out)
*mask_out = mask;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
