Due to conflicting/confusing defines in the vendor driver, we were
reading E2P_PHY_REG from the wrong location.
CR157 patching was slightly incorrect in that the vendor driver only
patches in an 8-bit value, whereas we were patching 24 bits.
Additionally, CR157 patching was happening on both zd1211 and zd1211b,
but this should only happen on zd1211.
Signed-off-by: Daniel Drake <dsd@xxxxxxxxxx>
Signed-off-by: Ulrich Kunitz <kune@xxxxxxxxxxxxxx>
---
zd_chip.c | 11 +++--------
zd_chip.h | 2 +-
2 files changed, 4 insertions(+), 9 deletions(-)
Index: linux/drivers/net/wireless/zd1211rw/zd_chip.c
===================================================================
--- linux.orig/drivers/net/wireless/zd1211rw/zd_chip.c
+++ linux/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -593,16 +593,16 @@ int zd_chip_unlock_phy_regs(struct zd_ch
return r;
}
-/* CR157 can be optionally patched by the EEPROM */
+/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
static int patch_cr157(struct zd_chip *chip)
{
int r;
- u32 value;
+ u16 value;
if (!chip->patch_cr157)
return 0;
- r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
+ r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
if (r)
return r;
@@ -792,11 +792,6 @@ static int zd1211b_hw_reset_phy(struct z
goto out;
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
- if (r)
- goto unlock;
-
- r = patch_cr157(chip);
-unlock:
t = zd_chip_unlock_phy_regs(chip);
if (t && !r)
r = t;
Index: linux/drivers/net/wireless/zd1211rw/zd_chip.h
===================================================================
--- linux.orig/drivers/net/wireless/zd1211rw/zd_chip.h
+++ linux/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -641,8 +641,8 @@ enum {
* also only 11 channels. */
#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18)
-#define E2P_PHY_REG E2P_DATA(0x1a)
#define E2P_DEVICE_VER E2P_DATA(0x20)
+#define E2P_PHY_REG E2P_DATA(0x25)
#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28)
#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a)
#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c)
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
