On Tue, 20 Mar 2007 17:23:54 -0600 Zan Lynx <zlynx@xxxxxxx> wrote: > On Mon, 2007-03-19 at 20:56 -0800, Andrew Morton wrote: > > Temporarily at > > > > http://userweb.kernel.org/~akpm/2.6.21-rc4-mm1/ > > > > Will appear later at > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc4/2.6.21-rc4-mm1/ > > First impressions: > Several of the same bugs as rc3-mm*: > * Freezes immediately if I touch the wlan0 device after loading > the new Broadcom wireless driver. cc linux-wireless > * Freezes immediately if I allow Bluetooth to configure. cc bluez-devel > * All freezes simply stop, no BUG or panic happens, no watchdog, > soft or NMI ever triggers. Thinking about it, I wonder if > disabling EDAC_K8 would help here? Does it steal NMI? I'll try > that later. Mabe that will be fixed by the just-uploaded ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc4/2.6.21-rc4-mm1/hot-fixes/tty-in-tiocsctty-when-we-steal-a-tty-hang-it-up-fix.patch > * I am using Reiser4 and after one of the above freezes and hard > power cycle, files that were in use *read*only* are filled with > zeros. For example, while testing and experiencing the above > freezes, I lost /etc/ld.so.preload > and /lib/security/pam_limits.so. What the heck? cc reiserfs-dev <most of remainder retained, sorry> > Good points: > * Runs longer than 5 minutes, since I am typing this while using > it. > * I like RDSL so far. > > Advice on who to annoy with further bug reports is welcome. Bluetooth > people? USB people? Broadcom driver people, probably. > > The system is a Athlon64 laptop, nForce3 motherboard. > Current lspci, dmesg (cannot get the frozen dmesgs, sorry) and .config > follow: > 00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) > 00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) > 00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) > 00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) > 00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) > 00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) > 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) > 00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2) > 00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) > 00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) > 00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control > 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3) > 02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) > 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) > 02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02) > 02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01) > 02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01) > 02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01) > > [ 0.000000] Linux version 2.6.21-rc4-mm1 (root@zephyr) (gcc version 4.2.0-alpha20070307 (prerelease) (Gentoo 4.2.0_alpha20070307)) #1 SMP PREEMPT Tue Mar 20 14:25:42 MDT 2007 > [ 0.000000] Command line: root=/dev/sda2 rootfstype=reiser4 ro i8042.nomux elevator=cfq resume=/dev/sda3 single > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) > [ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data) > [ 0.000000] BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used > [ 0.000000] Entering add_active_range(0, 256, 262000) 1 entries of 256 used > [ 0.000000] end_pfn_map = 1048576 > [ 0.000000] DMI present. > [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) > [ 0.000000] ACPI: RSDT 3FF7A87E, 0034 (r1 PTLTD RSDT 6040000 LTP 0) > [ 0.000000] ACPI: FACP 3FF7EE13, 0074 (r1 NVIDIA CK8 6040000 PTL_ F4240) > [ 0.000000] ACPI: DSDT 3FF7A8B2, 4561 (r1 NVIDIA CK8 6040000 MSFT 100000E) > [ 0.000000] ACPI: FACS 3FF7FFC0, 0040 > [ 0.000000] ACPI: APIC 3FF7EE87, 005A (r1 NVIDIA NV_APIC_ 6040000 LTP 0) > [ 0.000000] ACPI: BOOT 3FF7EEE1, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) > [ 0.000000] ACPI: SSDT 3FF7EF09, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used > [ 0.000000] Entering add_active_range(0, 256, 262000) 1 entries of 256 used > [ 0.000000] No mptable found. > [ 0.000000] sizeof(struct page) = 88 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 1048576 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0 -> 159 > [ 0.000000] 0: 256 -> 262000 > [ 0.000000] On node 0 totalpages: 261903 > [ 0.000000] Node 0 memmap at 0xffff810001000000 size 23068672 first pfn 0xffff810001000000 > [ 0.000000] DMA zone: 88 pages used for memmap > [ 0.000000] DMA zone: 2335 pages reserved > [ 0.000000] DMA zone: 1576 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 5540 pages used for memmap > [ 0.000000] DMA32 zone: 252364 pages, LIFO batch:31 > [ 0.000000] Normal zone: 0 pages used for memmap > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. > [ 0.000000] If you got timer trouble try acpi_use_timer_override > [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 > [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d0000 > [ 0.000000] Nosave address range: 00000000000d0000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 37312 bytes of per cpu data > [ 0.000000] Built 1 zonelists. Total pages: 253940 > [ 0.000000] Kernel command line: root=/dev/sda2 rootfstype=reiser4 ro i8042.nomux elevator=cfq resume=/dev/sda3 single > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 17.397762] time.c: Detected 2194.378 MHz processor. > [ 17.399354] Console: colour VGA+ 80x25 > [ 17.402298] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar > [ 17.402371] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 17.402423] ... MAX_LOCK_DEPTH: 30 > [ 17.402476] ... MAX_LOCKDEP_KEYS: 2048 > [ 17.402528] ... CLASSHASH_SIZE: 1024 > [ 17.402581] ... MAX_LOCKDEP_ENTRIES: 8192 > [ 17.402633] ... MAX_LOCKDEP_CHAINS: 16384 > [ 17.402685] ... CHAINHASH_SIZE: 8192 > [ 17.402744] memory used by lock dependency info: 1648 kB > [ 17.402798] per task-struct memory footprint: 1680 bytes > [ 17.402853] ------------------------ > [ 17.402903] | Locking API testsuite: > [ 17.402954] ---------------------------------------------------------------------------- > [ 17.403028] | spin |wlock |rlock |mutex | wsem | rsem | > [ 17.403101] -------------------------------------------------------------------------- > [ 17.403179] A-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.404370] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.405486] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.406652] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | > [ 17.407826] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.409052] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.410280] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | > [ 17.411514] double unlock: ok | ok | ok | ok | ok | ok | > [ 17.412580] initialize held: ok | ok | ok | ok | ok | ok | > [ 17.413647] bad unlock order: ok | ok | ok | ok | ok | ok | > [ 17.414777] -------------------------------------------------------------------------- > [ 17.414851] recursive read-lock: | ok | | ok | > [ 17.415334] recursive read-lock #2: | ok | | ok | > [ 17.415824] mixed read-write-lock: | ok | | ok | > [ 17.416312] mixed write-read-lock: | ok | | ok | > [ 17.416807] -------------------------------------------------------------------------- > [ 17.416880] hard-irqs-on + irq-safe-A/12: ok | ok | ok | > [ 17.417444] soft-irqs-on + irq-safe-A/12: ok | ok | ok | > [ 17.418018] hard-irqs-on + irq-safe-A/21: ok | ok | ok | > [ 17.418583] soft-irqs-on + irq-safe-A/21: ok | ok | ok | > [ 17.419156] sirq-safe-A => hirqs-on/12: ok | ok | ok | > [ 17.419730] sirq-safe-A => hirqs-on/21: ok | ok | ok | > [ 17.420294] hard-safe-A + irqs-on/12: ok | ok | ok | > [ 17.420865] soft-safe-A + irqs-on/12: ok | ok | ok | > [ 17.421432] hard-safe-A + irqs-on/21: ok | ok | ok | > [ 17.422003] soft-safe-A + irqs-on/21: ok | ok | ok | > [ 17.422568] hard-safe-A + unsafe-B #1/123: ok | ok | ok | > [ 17.423164] soft-safe-A + unsafe-B #1/123: ok | ok | ok | > [ 17.423759] hard-safe-A + unsafe-B #1/132: ok | ok | ok | > [ 17.424347] soft-safe-A + unsafe-B #1/132: ok | ok | ok | > [ 17.424943] hard-safe-A + unsafe-B #1/213: ok | ok | ok | > [ 17.425530] soft-safe-A + unsafe-B #1/213: ok | ok | ok | > [ 17.426126] hard-safe-A + unsafe-B #1/231: ok | ok | ok | > [ 17.426713] soft-safe-A + unsafe-B #1/231: ok | ok | ok | > [ 17.427296] hard-safe-A + unsafe-B #1/312: ok | ok | ok | > [ 17.427874] soft-safe-A + unsafe-B #1/312: ok | ok | ok | > [ 17.428446] hard-safe-A + unsafe-B #1/321: ok | ok | ok | > [ 17.429035] soft-safe-A + unsafe-B #1/321: ok | ok | ok | > [ 17.429618] hard-safe-A + unsafe-B #2/123: ok | ok | ok | > [ 17.430205] soft-safe-A + unsafe-B #2/123: ok | ok | ok | > [ 17.430798] hard-safe-A + unsafe-B #2/132: ok | ok | ok | > [ 17.431376] soft-safe-A + unsafe-B #2/132: ok | ok | ok | > [ 17.431969] hard-safe-A + unsafe-B #2/213: ok | ok | ok | > [ 17.432550] soft-safe-A + unsafe-B #2/213: ok | ok | ok | > [ 17.433143] hard-safe-A + unsafe-B #2/231: ok | ok | ok | > [ 17.433726] soft-safe-A + unsafe-B #2/231: ok | ok | ok | > [ 17.434307] hard-safe-A + unsafe-B #2/312: ok | ok | ok | > [ 17.434894] soft-safe-A + unsafe-B #2/312: ok | ok | ok | > [ 17.435479] hard-safe-A + unsafe-B #2/321: ok | ok | ok | > [ 17.436063] soft-safe-A + unsafe-B #2/321: ok | ok | ok | > [ 17.436647] hard-irq lock-inversion/123: ok | ok | ok | > [ 17.437237] soft-irq lock-inversion/123: ok | ok | ok | > [ 17.437831] hard-irq lock-inversion/132: ok | ok | ok | > [ 17.438410] soft-irq lock-inversion/132: ok | ok | ok | > [ 17.439004] hard-irq lock-inversion/213: ok | ok | ok | > [ 17.439586] soft-irq lock-inversion/213: ok | ok | ok | > [ 17.440180] hard-irq lock-inversion/231: ok | ok | ok | > [ 17.440765] soft-irq lock-inversion/231: ok | ok | ok | > [ 17.441347] hard-irq lock-inversion/312: ok | ok | ok | > [ 17.441934] soft-irq lock-inversion/312: ok | ok | ok | > [ 17.442520] hard-irq lock-inversion/321: ok | ok | ok | > [ 17.443105] soft-irq lock-inversion/321: ok | ok | ok | > [ 17.443694] hard-irq read-recursion/123: ok | > [ 17.443943] soft-irq read-recursion/123: ok | > [ 17.444193] hard-irq read-recursion/132: ok | > [ 17.444441] soft-irq read-recursion/132: ok | > [ 17.444700] hard-irq read-recursion/213: ok | > [ 17.444949] soft-irq read-recursion/213: ok | > [ 17.445199] hard-irq read-recursion/231: ok | > [ 17.445448] soft-irq read-recursion/231: ok | > [ 17.445707] hard-irq read-recursion/312: ok | > [ 17.445956] soft-irq read-recursion/312: ok | > [ 17.446206] hard-irq read-recursion/321: ok | > [ 17.446454] soft-irq read-recursion/321: ok | > [ 17.446711] ------------------------------------------------------- > [ 17.446767] Good, all 218 testcases passed! | > [ 17.446820] --------------------------------- > [ 17.447871] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > [ 17.448711] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 17.448901] Checking aperture... > [ 17.448953] CPU 0: aperture @ e8000000 size 128 MB > [ 17.470739] Memory: 1013752k/1048000k available (3200k kernel code, 33568k reserved, 1519k data, 212k init) > [ 17.530543] Calibrating delay using timer specific routine.. 4390.56 BogoMIPS (lpj=2195280) > [ 17.530799] Mount-cache hash table entries: 256 > [ 17.531328] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > [ 17.531387] CPU: L2 Cache: 1024K (64 bytes/line) > [ 17.531462] SMP alternatives: switching to UP code > [ 17.531743] Freeing SMP alternatives: 28k freed > [ 17.531816] ACPI: Core revision 20070126 > [ 17.536624] Parsing all Control Methods: > [ 17.536769] Table [DSDT](id 0001) - 650 Objects with 66 Devices 205 Methods 24 Regions > [ 17.538016] Parsing all Control Methods: > [ 17.538146] Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions > [ 17.538263] tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired > [ 17.558729] evxfevnt-0091 [02] enable : Transition to ACPI mode successful > [ 17.569330] Using local APIC timer interrupts. > [ 17.614892] result 12468058 > [ 17.614942] Detected 12.468 MHz APIC timer. > [ 17.615526] Brought up 1 CPUs > [ 17.615800] PM: Adding info for No Bus:platform > [ 17.616047] NET: Registered protocol family 16 > [ 17.616280] No dock devices found. > [ 17.616370] PM: Adding info for No Bus:vtcon0 > [ 17.616570] ACPI: bus type pci registered > [ 17.616634] PCI: Using configuration type 1 > [ 17.618818] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 > [ 17.618981] evgpeblk-0952 [04] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 > [ 17.619507] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block > [ 17.619786] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block > [ 17.620361] Completing Region/Field/Buffer/Package initialization:..................................................................... > [ 17.624273] Initialized 24/24 Regions 2/2 Fields 29/29 Buffers 14/21 Packages (662 nodes) > [ 17.624393] Initializing Device/Processor/Thermal objects by executing _INI methods:. > [ 17.624561] Executed 1 _INI methods requiring 0 _STA executions (examined 70 objects) > [ 17.624693] ACPI: Interpreter enabled > [ 17.624745] ACPI: (supports S0 S3 S4 S5) > [ 17.624983] ACPI: Using IOAPIC for interrupt routing > [ 17.625149] PM: Adding info for acpi:acpi_system:00 > [ 17.625225] PM: Adding info for acpi:button_power:00 > [ 17.625289] PM: Adding info for acpi:ACPI0007:00 > [ 17.625374] PM: Adding info for acpi:device:00 > [ 17.625455] PM: Adding info for acpi:pnp0c14:00 > [ 17.625608] PM: Adding info for acpi:PNP0C0C:00 > [ 17.625690] PM: Adding info for acpi:PNP0C0D:00 > [ 17.625774] PM: Adding info for acpi:PNP0A03:00 > [ 17.625928] PM: Adding info for acpi:device:01 > [ 17.626084] PM: Adding info for acpi:device:02 > [ 17.626170] PM: Adding info for acpi:device:03 > [ 17.626256] PM: Adding info for acpi:device:04 > [ 17.626338] PM: Adding info for acpi:device:05 > [ 17.626447] PM: Adding info for acpi:device:06 > [ 17.626525] PM: Adding info for acpi:device:07 > [ 17.626610] PM: Adding info for acpi:device:08 > [ 17.626686] PM: Adding info for acpi:device:09 > [ 17.626768] PM: Adding info for acpi:device:0a > [ 17.626847] PM: Adding info for acpi:device:0b > [ 17.626934] PM: Adding info for acpi:device:0c > [ 17.627011] PM: Adding info for acpi:device:0d > [ 17.627094] PM: Adding info for acpi:device:0e > [ 17.627176] PM: Adding info for acpi:device:0f > [ 17.627258] PM: Adding info for acpi:device:10 > [ 17.627336] PM: Adding info for acpi:device:11 > [ 17.627427] PM: Adding info for acpi:device:12 > [ 17.627506] PM: Adding info for acpi:device:13 > [ 17.627590] PM: Adding info for acpi:device:14 > [ 17.627672] PM: Adding info for acpi:device:15 > [ 17.627753] PM: Adding info for acpi:ACPI0003:00 > [ 17.627832] PM: Adding info for acpi:PNP0C02:00 > [ 17.627913] PM: Adding info for acpi:PNP0C01:00 > [ 17.628002] PM: Adding info for acpi:PNP0C09:00 > [ 17.667388] PM: Adding info for acpi:PNP0C0A:00 > [ 17.667474] PM: Adding info for acpi:PNP0C02:01 > [ 17.667555] PM: Adding info for acpi:PNP0000:00 > [ 17.667629] PM: Adding info for acpi:PNP0100:00 > [ 17.667708] PM: Adding info for acpi:PNP0200:00 > [ 17.667782] PM: Adding info for acpi:PNP0800:00 > [ 17.667862] PM: Adding info for acpi:PNP0B00:00 > [ 17.667936] PM: Adding info for acpi:PNP0C04:00 > [ 17.668093] PM: Adding info for acpi:PNP0303:00 > [ 17.668243] PM: Adding info for acpi:PNP0F13:00 > [ 17.668330] PM: Adding info for acpi:PNP0A05:00 > [ 17.668800] PM: Adding info for acpi:PNP0700:00 > [ 17.673598] PM: Adding info for acpi:PNP0401:00 > [ 17.673814] PM: Adding info for acpi:device:16 > [ 17.673974] PM: Adding info for acpi:device:17 > [ 17.674122] PM: Adding info for acpi:device:18 > [ 17.674287] PM: Adding info for acpi:video:00 > [ 17.674407] PM: Adding info for acpi:device:19 > [ 17.674526] PM: Adding info for acpi:device:1a > [ 17.674640] PM: Adding info for acpi:device:1b > [ 17.675014] PM: Adding info for acpi:PNP0C0F:00 > [ 17.675187] PM: Adding info for acpi:PNP0C0F:01 > [ 17.675371] PM: Adding info for acpi:PNP0C0F:02 > [ 17.675544] PM: Adding info for acpi:PNP0C0F:03 > [ 17.675724] PM: Adding info for acpi:PNP0C0F:04 > [ 17.675894] PM: Adding info for acpi:PNP0C0F:05 > [ 17.676072] PM: Adding info for acpi:PNP0C0F:06 > [ 17.676245] PM: Adding info for acpi:PNP0C0F:07 > [ 17.676430] PM: Adding info for acpi:PNP0C0F:08 > [ 17.676616] PM: Adding info for acpi:PNP0C0F:09 > [ 17.676795] PM: Adding info for acpi:PNP0C0F:0a > [ 17.676968] PM: Adding info for acpi:PNP0C0F:0b > [ 17.677150] PM: Adding info for acpi:PNP0C0F:0c > [ 17.677354] PM: Adding info for acpi:PNP0C0F:0d > [ 17.677428] PM: Adding info for acpi:thermal:00 > [ 17.677487] PM: Adding info for acpi:thermal:01 > [ 17.677838] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 17.677936] PM: Adding info for No Bus:pci0000:00 > [ 17.678314] 0000:00:08.0: cannot adjust BAR0 (not I/O) > [ 17.678371] 0000:00:08.0: cannot adjust BAR1 (not I/O) > [ 17.678427] 0000:00:08.0: cannot adjust BAR2 (not I/O) > [ 17.678481] 0000:00:08.0: cannot adjust BAR3 (not I/O) > [ 17.679034] PCI: Bus #03 (-#06) is hidden behind bridge #02 (-#02) (try 'pci=assign-busses') > [ 17.679109] Please report the result to linux-kernel to fix this permanently > [ 17.679229] PCI: Bus #07 (-#0a) is hidden behind bridge #02 (-#02) (try 'pci=assign-busses') > [ 17.679304] Please report the result to linux-kernel to fix this permanently > [ 17.679476] Boot video device is 0000:01:00.0 > [ 17.679535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 17.679678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] > [ 17.679749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] > [ 17.680943] PM: Adding info for pci:0000:00:00.0 > [ 17.682179] PM: Adding info for pci:0000:00:01.0 > [ 17.683404] PM: Adding info for pci:0000:00:01.1 > [ 17.684622] PM: Adding info for pci:0000:00:02.0 > [ 17.685836] PM: Adding info for pci:0000:00:02.1 > [ 17.687056] PM: Adding info for pci:0000:00:02.2 > [ 17.688272] PM: Adding info for pci:0000:00:06.0 > [ 17.689498] PM: Adding info for pci:0000:00:06.1 > [ 17.690712] PM: Adding info for pci:0000:00:08.0 > [ 17.691935] PM: Adding info for pci:0000:00:0a.0 > [ 17.693149] PM: Adding info for pci:0000:00:0b.0 > [ 17.694382] PM: Adding info for pci:0000:00:18.0 > [ 17.695596] PM: Adding info for pci:0000:00:18.1 > [ 17.696821] PM: Adding info for pci:0000:00:18.2 > [ 17.698035] PM: Adding info for pci:0000:00:18.3 > [ 17.698147] PM: Adding info for pci:0000:02:00.0 > [ 17.698253] PM: Adding info for pci:0000:02:01.0 > [ 17.698373] PM: Adding info for pci:0000:02:02.0 > [ 17.698479] PM: Adding info for pci:0000:02:04.0 > [ 17.698590] PM: Adding info for pci:0000:02:04.1 > [ 17.698697] PM: Adding info for pci:0000:02:04.2 > [ 17.698814] PM: Adding info for pci:0000:01:00.0 > [ 17.699206] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 > [ 17.699725] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 > [ 17.700246] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 > [ 17.700706] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. > [ 17.701249] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 > [ 17.701754] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 > [ 17.702253] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 > [ 17.702761] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 > [ 17.703260] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 > [ 17.703775] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. > [ 17.704311] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 > [ 17.704816] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 > [ 17.705333] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. > [ 17.705879] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. > [ 17.706254] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 17.706334] pnp: PnP ACPI init > [ 17.706401] PM: Adding info for No Bus:pnp0 > [ 17.706597] PM: Adding info for pnp:00:00 > [ 17.707281] PM: Adding info for pnp:00:01 > [ 17.707475] PM: Adding info for pnp:00:02 > [ 17.728319] PM: Adding info for pnp:00:03 > [ 17.728404] PM: Adding info for pnp:00:04 > [ 17.728465] PM: Adding info for pnp:00:05 > [ 17.728541] PM: Adding info for pnp:00:06 > [ 17.728606] PM: Adding info for pnp:00:07 > [ 17.728716] PM: Adding info for pnp:00:08 > [ 17.728822] PM: Adding info for pnp:00:09 > [ 17.729092] PM: Adding info for pnp:00:0a > [ 17.731090] PM: Adding info for pnp:00:0b > [ 17.732020] pnp: PnP ACPI: found 12 devices > [ 17.732153] Generic PHY: Registered new driver > [ 17.732403] SCSI subsystem initialized > [ 17.732504] libata version 2.20 loaded. > [ 17.732614] PCI: Using ACPI for IRQ routing > [ 17.732668] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > [ 17.732752] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 > [ 17.733015] agpgart: Detected AGP bridge 0 > [ 17.733072] agpgart: Setting up Nforce3 AGP. > [ 17.737586] PM: Adding info for No Bus:agpgart > [ 17.737683] agpgart: AGP aperture is 128M @ 0xe8000000 > [ 17.737871] pnp: 00:01: ioport range 0x8000-0x807f has been reserved > [ 17.737929] pnp: 00:01: ioport range 0x8080-0x80ff has been reserved > [ 17.737986] pnp: 00:01: ioport range 0x8400-0x847f has been reserved > [ 17.738044] pnp: 00:01: ioport range 0x8480-0x84ff has been reserved > [ 17.738101] pnp: 00:01: ioport range 0x8800-0x887f has been reserved > [ 17.738158] pnp: 00:01: ioport range 0x8880-0x88ff has been reserved > [ 17.738216] Time: tsc clocksource has been installed. > [ 17.738275] pnp: 00:01: ioport range 0x2040-0x207f has been reserved > [ 17.738332] pnp: 00:01: ioport range 0x2000-0x203f has been reserved > [ 17.738396] pnp: 00:02: iomem range 0xfff80000-0xffffffff has been reserved > [ 17.738455] pnp: 00:02: iomem range 0xfec00000-0xfec00fff has been reserved > [ 17.738514] pnp: 00:02: iomem range 0xfee00000-0xfeefffff has been reserved > [ 17.738572] pnp: 00:02: iomem range 0xfed00000-0xfed00fff has been reserved > [ 17.738673] PM: Adding info for No Bus:mem > [ 17.738725] PM: Adding info for No Bus:kmem > [ 17.738768] PM: Adding info for No Bus:null > [ 17.738816] PM: Adding info for No Bus:port > [ 17.738858] PM: Adding info for No Bus:zero > [ 17.738905] PM: Adding info for No Bus:full > [ 17.738947] PM: Adding info for No Bus:random > [ 17.738997] PM: Adding info for No Bus:urandom > [ 17.739039] PM: Adding info for No Bus:kmsg > [ 17.739158] PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.0 > [ 17.739235] PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.1 > [ 17.739313] PCI: Bus 3, cardbus bridge: 0000:02:04.0 > [ 17.739367] IO window: 00003000-000030ff > [ 17.739421] IO window: 00003400-000034ff > [ 17.739476] PREFETCH window: 50000000-53ffffff > [ 17.739531] PCI: Bus 7, cardbus bridge: 0000:02:04.1 > [ 17.739585] IO window: 00003800-000038ff > [ 17.739639] IO window: 00003c00-00003cff > [ 17.739693] PREFETCH window: 54000000-57ffffff > [ 17.739748] PCI: Bridge: 0000:00:0a.0 > [ 17.739800] IO window: 3000-7fff > [ 17.739853] MEM window: e0100000-e17fffff > [ 17.739906] PREFETCH window: 50000000-57ffffff > [ 17.739962] PCI: Bridge: 0000:00:0b.0 > [ 17.740013] IO window: disabled. > [ 17.740067] MEM window: e2000000-e2ffffff > [ 17.740121] PREFETCH window: f0000000-f80fffff > [ 17.740183] PCI: Setting latency timer of device 0000:00:0a.0 to 64 > [ 17.740708] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 > [ 17.740772] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 19 > [ 17.741334] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 > [ 17.741394] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 18 > [ 17.741573] NET: Registered protocol family 2 > [ 17.751310] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 17.751620] TCP established hash table entries: 65536 (order: 10, 4194304 bytes) > [ 17.757500] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) > [ 17.762325] TCP: Hash tables configured (established 65536 bind 65536) > [ 17.762418] TCP reno registered > [ 17.765663] Simple Boot Flag at 0x37 set to 0x1 > [ 17.765831] PM: Adding info for No Bus:mcelog > [ 17.765911] PM: Adding info for No Bus:msr0 > [ 17.765974] PM: Adding info for No Bus:cpu0 > [ 17.766279] PM: Adding info for platform:pcspkr > [ 17.766553] PM: Adding info for No Bus:snapshot > [ 17.766602] audit: initializing netlink socket (disabled) > [ 17.766677] audit(1174429488.298:1): initialized > [ 17.766920] Total HugeTLB memory allocated, 0 > [ 17.767309] Loading Reiser4. See www.namesys.com for a description of Reiser4. > [ 17.767640] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 17.768058] io scheduler noop registered > [ 17.768111] io scheduler anticipatory registered > [ 17.768164] io scheduler deadline registered > [ 17.768257] io scheduler cfq registered (default) > [ 17.769736] ACPI: AC Adapter [ACAD] (on-line) > [ 17.791230] ACPI: Battery Slot [BAT1] (battery present) > [ 17.791428] input: Power Button (FF) as /class/input/input0 > [ 17.791490] ACPI: Power Button (FF) [PWRF] > [ 17.791611] input: Power Button (CM) as /class/input/input1 > [ 17.791667] ACPI: Power Button (CM) [PWRB] > [ 17.791799] input: Lid Switch as /class/input/input2 > [ 17.791854] ACPI: Lid Switch [LID] > [ 17.792327] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) > [ 17.793720] ACPI: CPU0 (power states: C1[C1] C2[C2]) > [ 17.793997] cpuidle: using driver acpi_idle > [ 17.825473] ACPI Exception (thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20070126] > [ 17.828471] ACPI: Thermal Zone [THRM] (62 C) > [ 17.828571] PM: Adding info for No Bus:tty > [ 17.828615] PM: Adding info for No Bus:console > [ 17.828663] PM: Adding info for No Bus:ptmx > [ 17.828702] PM: Adding info for No Bus:tty0 > [ 17.828765] PM: Adding info for No Bus:vcs > [ 17.828811] PM: Adding info for No Bus:vcsa > [ 17.828858] PM: Adding info for No Bus:tty1 > [ 17.828908] PM: Adding info for No Bus:tty2 > [ 17.828949] PM: Adding info for No Bus:tty3 > [ 17.828996] PM: Adding info for No Bus:tty4 > [ 17.829035] PM: Adding info for No Bus:tty5 > [ 17.829089] PM: Adding info for No Bus:tty6 > [ 17.829132] PM: Adding info for No Bus:tty7 > [ 17.829183] PM: Adding info for No Bus:tty8 > [ 17.829228] PM: Adding info for No Bus:tty9 > [ 17.829280] PM: Adding info for No Bus:tty10 > [ 17.829323] PM: Adding info for No Bus:tty11 > [ 17.829374] PM: Adding info for No Bus:tty12 > [ 17.829418] PM: Adding info for No Bus:tty13 > [ 17.829474] PM: Adding info for No Bus:tty14 > [ 17.829518] PM: Adding info for No Bus:tty15 > [ 17.829570] PM: Adding info for No Bus:tty16 > [ 17.829614] PM: Adding info for No Bus:tty17 > [ 17.829667] PM: Adding info for No Bus:tty18 > [ 17.829713] PM: Adding info for No Bus:tty19 > [ 17.829767] PM: Adding info for No Bus:tty20 > [ 17.829820] PM: Adding info for No Bus:tty21 > [ 17.829874] PM: Adding info for No Bus:tty22 > [ 17.829922] PM: Adding info for No Bus:tty23 > [ 17.829976] PM: Adding info for No Bus:tty24 > [ 17.830024] PM: Adding info for No Bus:tty25 > [ 17.830083] PM: Adding info for No Bus:tty26 > [ 17.830130] PM: Adding info for No Bus:tty27 > [ 17.830185] PM: Adding info for No Bus:tty28 > [ 17.830230] PM: Adding info for No Bus:tty29 > [ 17.830286] PM: Adding info for No Bus:tty30 > [ 17.830332] PM: Adding info for No Bus:tty31 > [ 17.830387] PM: Adding info for No Bus:tty32 > [ 17.830433] PM: Adding info for No Bus:tty33 > [ 17.830489] PM: Adding info for No Bus:tty34 > [ 17.830540] PM: Adding info for No Bus:tty35 > [ 17.830600] PM: Adding info for No Bus:tty36 > [ 17.830647] PM: Adding info for No Bus:tty37 > [ 17.830705] PM: Adding info for No Bus:tty38 > [ 17.830751] PM: Adding info for No Bus:tty39 > [ 17.830807] PM: Adding info for No Bus:tty40 > [ 17.830855] PM: Adding info for No Bus:tty41 > [ 17.830912] PM: Adding info for No Bus:tty42 > [ 17.830960] PM: Adding info for No Bus:tty43 > [ 17.831015] PM: Adding info for No Bus:tty44 > [ 17.831063] PM: Adding info for No Bus:tty45 > [ 17.831138] PM: Adding info for No Bus:tty46 > [ 17.831181] PM: Adding info for No Bus:tty47 > [ 17.831235] PM: Adding info for No Bus:tty48 > [ 17.831280] PM: Adding info for No Bus:tty49 > [ 17.831334] PM: Adding info for No Bus:tty50 > [ 17.831378] PM: Adding info for No Bus:tty51 > [ 17.831429] PM: Adding info for No Bus:tty52 > [ 17.831474] PM: Adding info for No Bus:tty53 > [ 17.831527] PM: Adding info for No Bus:tty54 > [ 17.831574] PM: Adding info for No Bus:tty55 > [ 17.831633] PM: Adding info for No Bus:tty56 > [ 17.831683] PM: Adding info for No Bus:tty57 > [ 17.831740] PM: Adding info for No Bus:tty58 > [ 17.831787] PM: Adding info for No Bus:tty59 > [ 17.831844] PM: Adding info for No Bus:tty60 > [ 17.831893] PM: Adding info for No Bus:tty61 > [ 17.831952] PM: Adding info for No Bus:tty62 > [ 17.832002] PM: Adding info for No Bus:tty63 > [ 17.832160] PM: Adding info for No Bus:rtc > [ 17.832208] Real Time Clock Driver v1.12ac > [ 17.832270] PM: Adding info for No Bus:hpet > [ 17.832420] PM: Adding info for No Bus:watchdog > [ 17.832457] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) > [ 17.832534] Linux agpgart interface v0.102 (c) Dave Jones > [ 17.832589] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). > [ 17.832664] Hangcheck: Using get_cycles(). > [ 17.833305] loop: loaded (max 8 devices) > [ 17.833391] Marvell 88E1101: Registered new driver > [ 17.833475] Marvell 88E1111: Registered new driver > [ 17.833560] Marvell 88E1145: Registered new driver > [ 17.833652] Davicom DM9161E: Registered new driver > [ 17.833736] Davicom DM9131: Registered new driver > [ 17.833821] Cicada Cis8204: Registered new driver > [ 17.833905] Cicada Cis8201: Registered new driver > [ 17.833997] LXT970: Registered new driver > [ 17.834087] LXT971: Registered new driver > [ 17.834171] QS6612: Registered new driver > [ 17.834254] SMSC LAN83C185: Registered new driver > [ 17.834402] PM: Adding info for No Bus:lo > [ 17.834607] 8139too Fast Ethernet driver 0.9.28 > [ 17.834685] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 18 > [ 17.835148] PM: Adding info for No Bus:eth0 > [ 17.835216] eth0: RealTek RTL8139 at 0xffffc20000018800, 00:0f:b0:07:dc:49, IRQ 18 > [ 17.835290] eth0: Identified 8139 chip type 'RTL-8101' > [ 17.835500] pata_amd 0000:00:08.0: version 0.3.8 > [ 17.835526] PCI: Setting latency timer of device 0000:00:08.0 to 64 > [ 17.835636] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000012080 irq 14 > [ 17.835753] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000012088 irq 15 > [ 17.835848] scsi0 : pata_amd > [ 17.835912] PM: Adding info for No Bus:host0 > [ 17.990015] ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100 > [ 17.990073] ata1.00: 195371568 sectors, multi 16: LBA48 > [ 17.993003] ata1.00: configured for UDMA/100 > [ 17.993061] scsi1 : pata_amd > [ 17.993119] PM: Adding info for No Bus:host1 > [ 18.297591] ata2.00: ATAPI, max MWDMA2 > [ 18.451340] ata2.00: configured for MWDMA2 > [ 18.451405] PM: Adding info for No Bus:target0:0:0 > [ 18.451680] scsi 0:0:0:0: Direct-Access ATA HTS721010G9AT00 MCZO PQ: 0 ANSI: 5 > [ 18.452894] PM: Adding info for scsi:0:0:0:0 > [ 18.453120] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) > [ 18.453193] sd 0:0:0:0: [sda] Write Protect is off > [ 18.453248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 18.453271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 18.453648] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) > [ 18.453717] sd 0:0:0:0: [sda] Write Protect is off > [ 18.453771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 18.453793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 18.453901] sda: sda1 sda2 sda3 > [ 18.471748] sd 0:0:0:0: [sda] Attached SCSI disk > [ 18.471874] PM: Adding info for No Bus:target1:0:0 > [ 18.472353] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.19 PQ: 0 ANSI: 5 > [ 18.472434] PM: Adding info for scsi:1:0:0:0 > [ 18.474384] sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray > [ 18.474443] Uniform CD-ROM driver Revision: 3.20 > [ 18.474628] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 18.474809] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] > [ 18.474880] PCI: Bus 3, cardbus bridge: 0000:02:04.0 > [ 18.474934] IO window: 00003000-000030ff > [ 18.474988] IO window: 00003400-000034ff > [ 18.475043] PREFETCH window: 50000000-53ffffff > [ 18.475103] MEM window: e0400000-e07fffff > [ 18.475159] Yenta: Enabling burst memory read transactions > [ 18.475215] Yenta: Using CSCINT to route CSC interrupts to PCI > [ 18.475270] Yenta: Routing CardBus interrupts to PCI > [ 18.475327] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 > [ 18.698633] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 > [ 18.698687] Socket status: 30000086 > [ 18.698742] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 > [ 18.698816] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff > [ 18.698886] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff > [ 18.698945] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff > [ 18.699145] PM: Adding info for No Bus:pcmcia_socket0 > [ 18.949375] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] > [ 18.949447] Yenta: Using CSCINT to route CSC interrupts to PCI > [ 18.949502] Yenta: Routing CardBus interrupts to PCI > [ 18.949560] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 > [ 19.172901] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 > [ 19.172955] Socket status: 30000006 > [ 19.173009] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a > [ 19.173083] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff > [ 19.173140] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff > [ 19.173198] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff > [ 19.173373] PM: Adding info for No Bus:pcmcia_socket1 > [ 19.423712] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > [ 19.423836] PM: Adding info for platform:i8042 > [ 19.433971] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 19.434082] PM: Adding info for serio:serio0 > [ 19.434178] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 19.434240] PM: Adding info for serio:serio1 > [ 19.434351] PM: Adding info for No Bus:psaux > [ 19.434390] mice: PS/2 mouse device common for all mice > [ 19.434590] async_tx: api initialized (sync-only) > [ 19.434645] xor: automatically using best checksumming function: generic_sse > [ 19.439565] generic_sse: 6560.000 MB/sec > [ 19.439618] xor: using function: generic_sse (6560.000 MB/sec) > [ 19.439674] EDAC MC: Ver: 2.0.1 Mar 20 2007 > [ 19.440144] EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 > [ 19.440257] cpuidle: using governor ladder > [ 19.440389] TCP cubic registered > [ 19.440440] Initializing XFRM netlink socket > [ 19.440515] NET: Registered protocol family 1 > [ 19.440575] NET: Registered protocol family 17 > [ 19.440642] NET: Registered protocol family 15 > [ 19.440746] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (version 2.00.00) > [ 19.440940] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 > [ 19.440995] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa > [ 19.441050] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 > [ 19.441737] swsusp: Resume From Partition /dev/sda3 > [ 19.441739] PM: Checking swsusp image. > [ 19.444558] Marking TSC unstable due to possible TSC halt in C2 > [ 19.444618] Time: acpi_pm clocksource has been installed. > [ 19.458341] PM: Resume from disk failed. > [ 19.499700] input: AT Translated Set 2 keyboard as /class/input/input3 > [ 19.576971] reiser4: sda2: found disk format 4.0.0. > [ 25.172977] VFS: Mounted root (reiser4 filesystem) readonly. > [ 25.173099] Freeing unused kernel memory: 212k freed > [ 25.223972] PM: Adding info for No Bus:vcs1 > [ 25.453962] PM: Adding info for No Bus:vcsa1 > [ 26.020896] PM: Removing info for No Bus:vcs1 > [ 26.021468] PM: Removing info for No Bus:vcsa1 > [ 26.021876] PM: Adding info for No Bus:vcs1 > [ 26.022218] PM: Adding info for No Bus:vcsa1 > [ 26.022602] PM: Removing info for No Bus:vcs1 > [ 26.022952] PM: Removing info for No Bus:vcsa1 > [ 26.233012] PM: Adding info for No Bus:vcs1 > [ 26.233388] PM: Adding info for No Bus:vcsa1 > [ 26.233839] PM: Removing info for No Bus:vcs1 > [ 26.234049] PM: Removing info for No Bus:vcsa1 > [ 26.235514] PM: Adding info for No Bus:vcs1 > [ 26.235956] PM: Adding info for No Bus:vcsa1 > [ 26.236402] PM: Removing info for No Bus:vcs1 > [ 26.236784] PM: Removing info for No Bus:vcsa1 > [ 26.237017] PM: Adding info for No Bus:vcs1 > [ 26.237587] PM: Adding info for No Bus:vcsa1 > [ 26.238069] PM: Removing info for No Bus:vcs1 > [ 26.238457] PM: Removing info for No Bus:vcsa1 > [ 26.302723] PM: Adding info for No Bus:vcs1 > [ 26.303340] PM: Adding info for No Bus:vcsa1 > [ 29.773194] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 29.773218] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 29.936763] usbcore: registered new interface driver usbfs > [ 29.936876] usbcore: registered new interface driver hub > [ 29.936938] usbcore: registered new device driver usb > [ 29.938045] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > [ 29.938092] PCI: Enabling device 0000:00:02.0 (0004 -> 0006) > [ 29.938715] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 > [ 29.938727] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22 > [ 29.938746] PCI: Setting latency timer of device 0000:00:02.0 to 64 > [ 29.938750] ohci_hcd 0000:00:02.0: OHCI Host Controller > [ 29.943103] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 > [ 30.154957] ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0000000 > [ 30.190412] PM: Adding info for No Bus:timer > [ 30.208166] usb usb1: new device found, idVendor=0000, idProduct=0000 > [ 30.208171] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 > [ 30.208173] usb usb1: Product: OHCI Host Controller > [ 30.208175] usb usb1: Manufacturer: Linux 2.6.21-rc4-mm1 ohci_hcd > [ 30.208177] usb usb1: SerialNumber: 0000:00:02.0 > [ 30.208266] PM: Adding info for usb:usb1 > [ 30.208743] PM: Adding info for No Bus:usbdev1.1_ep00 > [ 30.208769] usb usb1: configuration #1 chosen from 1 choice > [ 30.209010] PM: Adding info for usb:1-0:1.0 > [ 30.209168] hub 1-0:1.0: USB hub found > [ 30.209274] hub 1-0:1.0: 3 ports detected > [ 30.310069] PM: Adding info for No Bus:usbdev1.1_ep81 > [ 30.310414] PM: Adding info for No Bus:usbdev1.1 > [ 30.310803] PCI: Enabling device 0000:00:02.1 (0004 -> 0006) > [ 30.311309] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 > [ 30.311320] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 21 > [ 30.311341] PCI: Setting latency timer of device 0000:00:02.1 to 64 > [ 30.311344] ohci_hcd 0000:00:02.1: OHCI Host Controller > [ 30.311377] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 > [ 30.523351] ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0001000 > [ 30.576281] usb usb2: new device found, idVendor=0000, idProduct=0000 > [ 30.576285] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 > [ 30.576288] usb usb2: Product: OHCI Host Controller > [ 30.576290] usb usb2: Manufacturer: Linux 2.6.21-rc4-mm1 ohci_hcd > [ 30.576292] usb usb2: SerialNumber: 0000:00:02.1 > [ 30.576318] PM: Adding info for usb:usb2 > [ 30.576410] PM: Adding info for No Bus:usbdev2.1_ep00 > [ 30.576433] usb usb2: configuration #1 chosen from 1 choice > [ 30.576451] PM: Adding info for usb:2-0:1.0 > [ 30.576485] hub 2-0:1.0: USB hub found > [ 30.576499] hub 2-0:1.0: 3 ports detected > [ 30.677124] PM: Adding info for No Bus:usbdev2.1_ep81 > [ 30.677190] PM: Adding info for No Bus:usbdev2.1 > [ 30.677819] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 > [ 30.677832] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 20 > [ 30.677853] PCI: Setting latency timer of device 0000:00:02.2 to 64 > [ 30.677856] ehci_hcd 0000:00:02.2: EHCI Host Controller > [ 30.677889] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 > [ 30.677932] PCI: cache line size of 64 is not supported by device 0000:00:02.2 > [ 30.677957] ehci_hcd 0000:00:02.2: irq 20, io mem 0xe0004000 > [ 30.677962] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > [ 30.678054] usb usb3: new device found, idVendor=0000, idProduct=0000 > [ 30.678057] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 > [ 30.678059] usb usb3: Product: EHCI Host Controller > [ 30.678061] usb usb3: Manufacturer: Linux 2.6.21-rc4-mm1 ehci_hcd > [ 30.678063] usb usb3: SerialNumber: 0000:00:02.2 > [ 30.678072] PM: Adding info for usb:usb3 > [ 30.678141] PM: Adding info for No Bus:usbdev3.1_ep00 > [ 30.678162] usb usb3: configuration #1 chosen from 1 choice > [ 30.678184] PM: Adding info for usb:3-0:1.0 > [ 30.678207] hub 3-0:1.0: USB hub found > [ 30.678380] hub 3-0:1.0: 6 ports detected > [ 30.778960] PM: Adding info for No Bus:usbdev3.1_ep81 > [ 30.779025] PM: Adding info for No Bus:usbdev3.1 > [ 30.783028] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 > [ 30.783033] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 22 > [ 30.783069] PCI: Setting latency timer of device 0000:00:06.0 to 64 > [ 30.867183] input: PS/2 Mouse as /class/input/input4 > [ 30.879995] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 > [ 30.886726] AC'97 0 analog subsections not ready > [ 31.288300] usb 2-2: new full speed USB device using ohci_hcd and address 2 > [ 31.446880] intel8x0_measure_ac97_clock: measured 50191 usecs > [ 31.446884] intel8x0: clocking to 47393 > [ 31.446930] PM: Adding info for No Bus:card0 > [ 31.447154] PM: Adding info for No Bus:pcmC0D2p > [ 31.447411] PM: Adding info for No Bus:pcmC0D1c > [ 31.447441] PM: Adding info for No Bus:pcmC0D0p > [ 31.447539] PM: Adding info for No Bus:pcmC0D0c > [ 31.447565] PM: Adding info for ac97:0-0:AD1981B > [ 31.447601] PM: Adding info for No Bus:controlC0 > [ 31.508940] usb 2-2: new device found, idVendor=049f, idProduct=0086 > [ 31.508945] usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > [ 31.508948] usb 2-2: Product: Bluetooth by hp > [ 31.508950] usb 2-2: Manufacturer: ACTIONTEC > [ 31.508975] PM: Adding info for usb:2-2 > [ 31.509068] PM: Adding info for No Bus:usbdev2.2_ep00 > [ 31.509092] usb 2-2: configuration #1 chosen from 1 choice > [ 31.512951] PM: Adding info for usb:2-2:1.0 > [ 31.513032] PM: Adding info for No Bus:usbdev2.2_ep81 > [ 31.513073] PM: Adding info for No Bus:usbdev2.2_ep02 > [ 31.513107] PM: Adding info for No Bus:usbdev2.2_ep82 > [ 31.513141] PM: Adding info for usb:2-2:1.1 > [ 31.513182] PM: Adding info for No Bus:usbdev2.2_ep03 > [ 31.513221] PM: Adding info for No Bus:usbdev2.2_ep83 > [ 31.513249] PM: Adding info for usb:2-2:1.2 > [ 31.513329] PM: Adding info for No Bus:usbdev2.2 > [ 31.717722] hci_usb: Unknown symbol hci_suspend_dev > [ 31.717763] hci_usb: Unknown symbol hci_free_dev > [ 31.717983] hci_usb: Unknown symbol hci_resume_dev > [ 31.718035] hci_usb: Unknown symbol hci_alloc_dev > [ 31.718136] hci_usb: Unknown symbol hci_unregister_dev > [ 31.718243] hci_usb: Unknown symbol hci_register_dev > [ 31.781354] hci_usb: Unknown symbol hci_suspend_dev > [ 31.781394] hci_usb: Unknown symbol hci_free_dev > [ 31.781614] hci_usb: Unknown symbol hci_resume_dev > [ 31.781666] hci_usb: Unknown symbol hci_alloc_dev > [ 31.781767] hci_usb: Unknown symbol hci_unregister_dev > [ 31.781874] hci_usb: Unknown symbol hci_register_dev > [ 31.787382] hci_usb: Unknown symbol hci_suspend_dev > [ 31.787422] hci_usb: Unknown symbol hci_free_dev > [ 31.787642] hci_usb: Unknown symbol hci_resume_dev > [ 31.787694] hci_usb: Unknown symbol hci_alloc_dev > [ 31.787795] hci_usb: Unknown symbol hci_unregister_dev > [ 31.787901] hci_usb: Unknown symbol hci_register_dev > [ 33.005970] NET: Registered protocol family 10 > [ 34.776248] ReiserFS: sda1: found reiserfs format "3.6" with standard journal > [ 34.776310] ReiserFS: sda1: using ordered data mode > [ 34.776796] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > [ 34.778707] ReiserFS: sda1: checking transaction log (sda1) > [ 34.810342] ReiserFS: sda1: Using r5 hash to sort names > [ 35.034524] Adding 2843496k swap on /dev/disk/by-uuid/fd35277a-8dc7-4afe-8257-fda61b757344. Priority:100 extents:1 across:2843496k > [ 42.116195] PM: Removing info for No Bus:vcs1 > [ 42.116521] PM: Removing info for No Bus:vcsa1 > [ 42.146081] PM: Adding info for No Bus:vcs1 > [ 42.146219] PM: Adding info for No Bus:vcsa1 > [ 1061.733883] su[2639]: segfault at 0000000000000008 rip 0000003103c098b2 rsp 00007fffb0fea590 error 4 > [ 1601.898867] PM: Removing info for No Bus:vcs1 > [ 1601.899098] PM: Removing info for No Bus:vcsa1 > [ 1601.905470] PM: Adding info for No Bus:vcs1 > [ 1601.905622] PM: Adding info for No Bus:vcsa1 > [ 1606.464599] PM: Adding info for No Bus:vcs2 > [ 1606.464845] PM: Adding info for No Bus:vcsa2 > [ 1606.466860] PM: Removing info for No Bus:vcs2 > [ 1606.466969] PM: Removing info for No Bus:vcsa2 > [ 1606.473400] PM: Adding info for No Bus:vcs3 > [ 1606.473561] PM: Adding info for No Bus:vcsa3 > [ 1606.475560] PM: Removing info for No Bus:vcs3 > [ 1606.475667] PM: Removing info for No Bus:vcsa3 > [ 1606.478811] PM: Adding info for No Bus:vcs4 > [ 1606.478973] PM: Adding info for No Bus:vcsa4 > [ 1606.479291] PM: Removing info for No Bus:vcs4 > [ 1606.479321] PM: Removing info for No Bus:vcsa4 > [ 1606.479397] PM: Adding info for No Bus:vcs5 > [ 1606.479420] PM: Adding info for No Bus:vcsa5 > [ 1606.479450] PM: Removing info for No Bus:vcs5 > [ 1606.479472] PM: Removing info for No Bus:vcsa5 > [ 1606.479549] PM: Adding info for No Bus:vcs6 > [ 1606.479572] PM: Adding info for No Bus:vcsa6 > [ 1606.479604] PM: Removing info for No Bus:vcs6 > [ 1606.479626] PM: Removing info for No Bus:vcsa6 > [ 1606.479694] PM: Adding info for No Bus:vcs7 > [ 1606.479716] PM: Adding info for No Bus:vcsa7 > [ 1606.479745] PM: Removing info for No Bus:vcs7 > [ 1606.479767] PM: Removing info for No Bus:vcsa7 > [ 1606.479835] PM: Adding info for No Bus:vcs8 > [ 1606.479859] PM: Adding info for No Bus:vcsa8 > [ 1606.479928] PM: Removing info for No Bus:vcs8 > [ 1606.479951] PM: Removing info for No Bus:vcsa8 > [ 1606.480018] PM: Adding info for No Bus:vcs9 > [ 1606.480041] PM: Adding info for No Bus:vcsa9 > [ 1606.480071] PM: Removing info for No Bus:vcs9 > [ 1606.480093] PM: Removing info for No Bus:vcsa9 > [ 1606.480160] PM: Adding info for No Bus:vcs10 > [ 1606.480183] PM: Adding info for No Bus:vcsa10 > [ 1606.480212] PM: Removing info for No Bus:vcs10 > [ 1606.480234] PM: Removing info for No Bus:vcsa10 > [ 1606.480302] PM: Adding info for No Bus:vcs11 > [ 1606.480325] PM: Adding info for No Bus:vcsa11 > [ 1606.480354] PM: Removing info for No Bus:vcs11 > [ 1606.480376] PM: Removing info for No Bus:vcsa11 > [ 1606.910477] PM: Adding info for No Bus:vcs2 > [ 1606.910514] PM: Adding info for No Bus:vcsa2 > [ 1606.917302] PM: Removing info for No Bus:vcs2 > [ 1606.917349] PM: Removing info for No Bus:vcsa2 > [ 1606.919043] PM: Adding info for No Bus:vcs3 > [ 1606.919071] PM: Adding info for No Bus:vcsa3 > [ 1606.927621] PM: Adding info for No Bus:vcs4 > [ 1606.927658] PM: Adding info for No Bus:vcsa4 > [ 1606.928858] PM: Removing info for No Bus:vcs3 > [ 1606.928892] PM: Removing info for No Bus:vcsa3 > [ 1606.935224] PM: Removing info for No Bus:vcs4 > [ 1606.935269] PM: Removing info for No Bus:vcsa4 > [ 1606.937061] PM: Adding info for No Bus:vcs5 > [ 1606.937089] PM: Adding info for No Bus:vcsa5 > [ 1606.947922] PM: Removing info for No Bus:vcs5 > [ 1606.947970] PM: Removing info for No Bus:vcsa5 > [ 1606.951331] PM: Adding info for No Bus:vcs6 > [ 1606.951366] PM: Adding info for No Bus:vcsa6 > [ 1606.958845] PM: Removing info for No Bus:vcs6 > [ 1606.958892] PM: Removing info for No Bus:vcsa6 > [ 1606.961602] PM: Adding info for No Bus:vcs7 > [ 1606.961636] PM: Adding info for No Bus:vcsa7 > [ 1606.972031] PM: Removing info for No Bus:vcs7 > [ 1606.972082] PM: Removing info for No Bus:vcsa7 > [ 1606.973903] PM: Adding info for No Bus:vcs8 > [ 1606.973933] PM: Adding info for No Bus:vcsa8 > [ 1606.982366] PM: Removing info for No Bus:vcs8 > [ 1606.982413] PM: Removing info for No Bus:vcsa8 > [ 1606.986078] PM: Adding info for No Bus:vcs9 > [ 1606.986113] PM: Adding info for No Bus:vcsa9 > [ 1607.000479] PM: Adding info for No Bus:vcs10 > [ 1607.000514] PM: Adding info for No Bus:vcsa10 > [ 1607.000750] PM: Removing info for No Bus:vcs9 > [ 1607.000782] PM: Removing info for No Bus:vcsa9 > [ 1607.025869] PM: Adding info for No Bus:vcs11 > [ 1607.025904] PM: Adding info for No Bus:vcsa11 > [ 1607.031896] PM: Removing info for No Bus:vcs11 > [ 1607.031941] PM: Removing info for No Bus:vcsa11 > [ 1607.043139] PM: Removing info for No Bus:vcs10 > [ 1607.043185] PM: Removing info for No Bus:vcsa10 > [ 1608.025861] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 > [ 1608.343434] PM: Removing info for No Bus:vcs1 > [ 1608.343599] PM: Removing info for No Bus:vcsa1 > [ 1608.348965] PM: Adding info for No Bus:vcs1 > [ 1608.349084] PM: Adding info for No Bus:vcsa1 > [ 1608.350359] PM: Removing info for No Bus:vcs1 > [ 1608.350447] PM: Removing info for No Bus:vcsa1 > [ 1608.350790] PM: Adding info for No Bus:vcs1 > [ 1608.350809] PM: Adding info for No Bus:vcsa1 > [ 1608.350872] PM: Removing info for No Bus:vcs1 > [ 1608.350891] PM: Removing info for No Bus:vcsa1 > [ 1608.350927] PM: Adding info for No Bus:vcs1 > [ 1608.350945] PM: Adding info for No Bus:vcsa1 > [ 1608.351049] PM: Removing info for No Bus:vcs1 > [ 1608.351068] PM: Removing info for No Bus:vcsa1 > [ 1608.353580] PM: Adding info for No Bus:vcs1 > [ 1608.353616] PM: Adding info for No Bus:vcsa1 > [ 1617.090942] eth0: no IPv6 routers present > [ 1617.123609] ata1.00: configured for UDMA/100 > [ 1617.123618] ata1: EH complete > [ 1617.140588] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) > [ 1617.140902] sd 0:0:0:0: [sda] Write Protect is off > [ 1617.140905] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1617.149976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 1620.665587] process `named' is using obsolete setsockopt SO_BSDCOMPAT > [ 1620.742991] PM: Adding info for No Bus:vcs7 > [ 1620.744509] PM: Adding info for No Bus:vcsa7 > [ 1620.792323] PM: Removing info for No Bus:vcs7 > [ 1620.793678] PM: Removing info for No Bus:vcsa7 > [ 1621.266697] PM: Adding info for No Bus:vcs7 > [ 1621.268278] PM: Adding info for No Bus:vcsa7 > [ 1622.859425] PM: Adding info for No Bus:mixer > [ 1622.939896] PM: Adding info for No Bus:adsp > [ 1622.955211] PM: Adding info for No Bus:dsp > [ 1622.958759] PM: Adding info for No Bus:audio > [ 1624.113602] esound-esd[57956]: segfault at 000000000000ac44 rip 00000036a8c55b2b rsp 00007fff9723d8f0 error 4 > [ 1625.283022] PM: Adding info for No Bus:vcs2 > [ 1625.284318] PM: Adding info for No Bus:vcsa2 > [ 1625.285611] PM: Adding info for No Bus:vcs3 > [ 1625.286744] PM: Adding info for No Bus:vcsa3 > [ 1625.289092] PM: Adding info for No Bus:vcs4 > [ 1625.290316] PM: Adding info for No Bus:vcsa4 > [ 1625.292624] PM: Adding info for No Bus:vcs5 > [ 1625.293892] PM: Adding info for No Bus:vcsa5 > [ 1625.296159] PM: Adding info for No Bus:vcs6 > [ 1625.297535] PM: Adding info for No Bus:vcsa6 > [ 1651.450090] esd[58205]: segfault at 000000000000ac44 rip 00000036a8c55b2b rsp 00007fffebe7fcd0 error 4 > [ 1658.130375] ISO 9660 Extensions: Microsoft Joliet Level 3 > [ 1658.254107] ISO 9660 Extensions: RRIP_1991A > [ 1660.022177] [ACPI Debug] String: [0x12] "=====QUERY_25=====" > [ 1663.057766] > [ 1663.057769] ======================================================= > [ 1663.057775] [ INFO: possible circular locking dependency detected ] > [ 1663.057778] 2.6.21-rc4-mm1 #1 > [ 1663.057780] ------------------------------------------------------- > [ 1663.057783] evolution-data-/58416 is trying to acquire lock: > [ 1663.057785] (&mm->mmap_sem){----}, at: [<ffffffff80269eda>] do_page_fault+0x35a/0x800 > [ 1663.057795] > [ 1663.057796] but task is already holding lock: > [ 1663.057798] (&data->latch){----}, at: [<ffffffff8036a835>] read_unix_file+0x95/0x450 > [ 1663.057806] > [ 1663.057807] which lock already depends on the new lock. > [ 1663.057808] > [ 1663.057809] > [ 1663.057810] the existing dependency chain (in reverse order) is: > [ 1663.057812] > [ 1663.057813] -> #1 (&data->latch){----}: > [ 1663.057816] [<ffffffff802ae4c1>] __lock_acquire+0xd61/0x1010 > [ 1663.057823] [<ffffffff802ae7b9>] lock_acquire+0x49/0x70 > [ 1663.057829] [<ffffffff8036c721>] get_exclusive_access+0x11/0x20 > [ 1663.057836] [<ffffffff802a8c9f>] down_write+0x2f/0x40 > [ 1663.057843] [<ffffffff8036c721>] get_exclusive_access+0x11/0x20 > [ 1663.057849] [<ffffffff8036ac50>] mmap_unix_file+0x60/0x140 > [ 1663.057855] [<ffffffff8020dbf7>] do_mmap_pgoff+0x4f7/0x800 > [ 1663.057862] [<ffffffff802acfd6>] mark_held_locks+0x76/0xa0 > [ 1663.057868] [<ffffffff80267754>] _spin_unlock_irq+0x24/0x50 > [ 1663.057873] [<ffffffff8026775f>] _spin_unlock_irq+0x2f/0x50 > [ 1663.057879] [<ffffffff80234db3>] elf_map+0xa3/0x100 > [ 1663.057886] [<ffffffff80217de2>] load_elf_binary+0x902/0x1c30 > [ 1663.057893] [<ffffffff8028de20>] load_aout_binary+0x0/0x960 > [ 1663.057899] [<ffffffff802174e0>] load_elf_binary+0x0/0x1c30 > [ 1663.057905] [<ffffffff802406b3>] search_binary_handler+0xf3/0x2b0 > [ 1663.057912] [<ffffffff8024f322>] load_script+0x212/0x240 > [ 1663.057919] [<ffffffff802174e0>] load_elf_binary+0x0/0x1c30 > [ 1663.057925] [<ffffffff8024f110>] load_script+0x0/0x240 > [ 1663.057930] [<ffffffff802406b3>] search_binary_handler+0xf3/0x2b0 > [ 1663.057936] [<ffffffff8023f9f8>] do_execve+0x188/0x250 > [ 1663.057942] [<ffffffff802a1a10>] __call_usermodehelper+0x0/0x80 > [ 1663.057950] [<ffffffff80255034>] sys_execve+0x44/0x70 > [ 1663.057956] [<ffffffff80260044>] kernel_execve+0x64/0xd0 > [ 1663.057963] [<ffffffff802a1a10>] __call_usermodehelper+0x0/0x80 > [ 1663.057969] [<ffffffff802a1e0b>] ____call_usermodehelper+0x15b/0x170 > [ 1663.057975] [<ffffffff8025ffd8>] child_rip+0xa/0x12 > [ 1663.057981] [<ffffffff80267754>] _spin_unlock_irq+0x24/0x50 > [ 1663.057987] [<ffffffff8025f6c0>] restore_args+0x0/0x30 > [ 1663.057993] [<ffffffff802a1cb0>] ____call_usermodehelper+0x0/0x170 > [ 1663.057999] [<ffffffff8025ffce>] child_rip+0x0/0x12 > [ 1663.058004] [<ffffffffffffffff>] 0xffffffffffffffff > [ 1663.058042] > [ 1663.058043] -> #0 (&mm->mmap_sem){----}: > [ 1663.058045] [<ffffffff802ac62b>] print_circular_bug_header+0xdb/0x100 > [ 1663.058051] [<ffffffff802ae390>] __lock_acquire+0xc30/0x1010 > [ 1663.058057] [<ffffffff802ae7b9>] lock_acquire+0x49/0x70 > [ 1663.058062] [<ffffffff80269eda>] do_page_fault+0x35a/0x800 > [ 1663.058068] [<ffffffff802a8bc2>] down_read+0x32/0x40 > [ 1663.058074] [<ffffffff80269eda>] do_page_fault+0x35a/0x800 > [ 1663.058080] [<ffffffff80264207>] thread_return+0xef/0x148 > [ 1663.058088] [<ffffffff802676fd>] _spin_unlock_irqrestore+0x3d/0x70 > [ 1663.058094] [<ffffffff80267d2d>] error_exit+0x0/0x96 > [ 1663.058100] [<ffffffff8020ccbf>] file_read_actor+0x6f/0x190 > [ 1663.058105] [<ffffffff80240a6f>] __lock_page+0x5f/0x70 > [ 1663.058111] [<ffffffff8020bcd7>] do_generic_mapping_read+0x1f7/0x500 > [ 1663.058117] [<ffffffff8020cc50>] file_read_actor+0x0/0x190 > [ 1663.058123] [<ffffffff802162ca>] generic_file_aio_read+0x19a/0x1f0 > [ 1663.058129] [<ffffffff8020c91f>] do_sync_read+0xcf/0x120 > [ 1663.058135] [<ffffffff802a61f0>] autoremove_wake_function+0x0/0x30 > [ 1663.058141] [<ffffffff802675f9>] _spin_unlock+0x29/0x50 > [ 1663.058146] [<ffffffff8034f6fe>] reiser4_grab+0xae/0xd0 > [ 1663.058155] [<ffffffff8036a879>] read_unix_file+0xd9/0x450 > [ 1663.058161] [<ffffffff8020acea>] vfs_read+0xba/0x180 > [ 1663.058166] [<ffffffff80212b2e>] sys_pread64+0x5e/0x90 > [ 1663.058172] [<ffffffff8025f11e>] system_call+0x7e/0x83 > [ 1663.058178] [<ffffffffffffffff>] 0xffffffffffffffff > [ 1663.058184] > [ 1663.058185] other info that might help us debug this: > [ 1663.058186] > [ 1663.058188] 1 lock held by evolution-data-/58416: > [ 1663.058190] #0: (&data->latch){----}, at: [<ffffffff8036a835>] read_unix_file+0x95/0x450 > [ 1663.058196] > [ 1663.058196] stack backtrace: > [ 1663.058198] > [ 1663.058198] Call Trace: > [ 1663.058204] [<ffffffff802ac214>] print_circular_bug_tail+0x74/0x90 > [ 1663.058208] [<ffffffff802ac62b>] print_circular_bug_header+0xdb/0x100 > [ 1663.058211] [<ffffffff802ae390>] __lock_acquire+0xc30/0x1010 > [ 1663.058216] [<ffffffff802ae7b9>] lock_acquire+0x49/0x70 > [ 1663.058219] [<ffffffff80269eda>] do_page_fault+0x35a/0x800 > [ 1663.058223] [<ffffffff802a8bc2>] down_read+0x32/0x40 > [ 1663.058226] [<ffffffff80269eda>] do_page_fault+0x35a/0x800 > [ 1663.058232] [<ffffffff80264207>] thread_return+0xef/0x148 > [ 1663.058236] [<ffffffff802676fd>] _spin_unlock_irqrestore+0x3d/0x70 > [ 1663.058240] [<ffffffff80267d2d>] error_exit+0x0/0x96 > [ 1663.058245] [<ffffffff8020ccbf>] file_read_actor+0x6f/0x190 > [ 1663.058248] [<ffffffff80240a6f>] __lock_page+0x5f/0x70 > [ 1663.058253] [<ffffffff8020bcd7>] do_generic_mapping_read+0x1f7/0x500 > [ 1663.058256] [<ffffffff8020cc50>] file_read_actor+0x0/0x190 > [ 1663.058263] [<ffffffff802162ca>] generic_file_aio_read+0x19a/0x1f0 > [ 1663.058267] [<ffffffff8020c91f>] do_sync_read+0xcf/0x120 > [ 1663.058272] [<ffffffff802a61f0>] autoremove_wake_function+0x0/0x30 > [ 1663.058276] [<ffffffff802675f9>] _spin_unlock+0x29/0x50 > [ 1663.058280] [<ffffffff8034f6fe>] reiser4_grab+0xae/0xd0 > [ 1663.058284] [<ffffffff8036a879>] read_unix_file+0xd9/0x450 > [ 1663.058290] [<ffffffff8020acea>] vfs_read+0xba/0x180 > [ 1663.058294] [<ffffffff80212b2e>] sys_pread64+0x5e/0x90 > [ 1663.058298] [<ffffffff8025f11e>] system_call+0x7e/0x83 > [ 1663.058301] > [ 1714.279224] process `rndc' is using obsolete setsockopt SO_BSDCOMPAT > [ 1717.959422] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 > [ 1721.544091] process `named' is using obsolete setsockopt SO_BSDCOMPAT > [ 1725.344372] eth0: no IPv6 routers present > - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
