On Thu, Feb 08, 2007 at 12:20:30PM -0600, Jory A. Pratt wrote: > Larry Finger wrote: > > I have really _GOOD_ news!!!!! While reviewing the latest changes in the V4 specs, I found an > > interchange of the PHY version and PHY revision fields, relative to the current V3 specs. Of the > > three cards that I have, the 4306 had the same value for the PHY version and revision. In addition, > > it was the only card of the 3 thaw would work at 11Mbs. A light went on! > > > > After installing the patch listed below, both my 4318 and my 4311 will now run at 11Mbs. From tests > > with iperf, I now get rates of 6.1 - 6.5 Mbs from all three. > I have tested this until I am blue in the face on a 4318. It killed me, > I was getting less then 200k/b a sec on a 5M pipe :(. I reverted the > patch and all is back to working even tho transfering files on the > internal network is still way out there. Jory, Have you tried the patch Larry posted yesterday w/ subject "RFT: The real fix for BCM4311 and BCM4312"? Thanks, John -- John W. Linville linville@xxxxxxxxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
