I have really _GOOD_ news!!!!! While reviewing the latest changes in the V4 specs, I found an interchange of the PHY version and PHY revision fields, relative to the current V3 specs. Of the three cards that I have, the 4306 had the same value for the PHY version and revision. In addition, it was the only card of the 3 thaw would work at 11Mbs. A light went on! After installing the patch listed below, both my 4318 and my 4311 will now run at 11Mbs. From tests with iperf, I now get rates of 6.1 - 6.5 Mbs from all three. Larry ========== Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c =================================================================== --- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3707,9 +3707,9 @@ static int bcm43xx_read_phyinfo(struct b value = bcm43xx_read16(bcm, BCM43xx_MMIO_PHY_VER); - phy_version = (value & 0xF000) >> 12; + phy_rev = (value & 0xF000) >> 12; phy_type = (value & 0x0F00) >> 8; - phy_rev = (value & 0x000F); + phy_version = (value & 0x000F); dprintk(KERN_INFO PFX "Detected PHY: Version: %x, Type %x, Revision %x\n", phy_version, phy_type, phy_rev); - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
