Gyusun, Which Linux distribution are you using? If you are configuring and building the kernel yourself, you have to make sure that the i2400m driver is built and loaded. Here is an excerpt from my lsmod: # lsmod | grep i2400 i2400m_usb 35620 0 i2400m 122035 1 i2400m_usb wimax 29670 1 i2400m And here's my rfkill list: # rfkill list 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: i2400m-usb:8-3:1.0: WiMAX Soft blocked: yes Hard blocked: no I'm using a Thinkpad X301 with a 5350 chip, on Gentoo Linux. On Gentoo the wimax software is available under the package "wimax-tools". If you are in Korea, it would be great if you could get WiBro working :) I'm in Japan, and unfortunately the provisioning software is Windows-only ... Good luck! On Thu, 12 Jan 2012 20:50:19 +0900 ? ?? <lysters at gmail.com> wrote: > It's my pleasure to contact you. > > Actually I bought a new laptop this monday which support WiMAX > Network using Intel Centrino Wireless N + WiMAX 6150. > > It pretty good works in the preinstall Windows 7. I can swich the > mode of Wireless Card for WLAN or WiMAX using "Intel Proset > Connection Uitility" > > But in the Linux, Kernel just figure out the this wireless card for > WiFi network only. > > I think that if i want to start wimax operation, kenel has to > recognize it can works for not only wifi but also wifi. > > More specifically, When i command "rfkill list", It shows just > Wireless LAN phy 0 as follows result. > =================================================================================== > 0: phy0: Wireless LAN Soft blocked: no > Hard blocked: no > > "lspci -nnk" > 01:00.0 Network controller [0280]: Intel Corporation Centrino > Wireless-N + WiMAX 6150 [8086:0885] (rev 5f) Subsystem: Intel > Corporation Centrino Wireless-N + WiMAX 6150 BGN [8086:1305] Kernel > driver in use: iwlwifi Kernel modules: iwlwifi > ==================================================================================== > > As you can see in above result, Network controller is clearly founded > and use iwlwifi driver... > but logically it just operate for wireless LAN mode only... > > How can I switch WiFi to WiMAX? > > If there is any advice or suggestion that you could give me to > resolve this problem, it's going to be a huge help for my research. > > I will really appreciate if you give a response. > > Thank you for giving me your valuable time. > > Best regards, > > Gyusun > > Thanks
