Sameness in Scan Results

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2011-04-26 at 13:54 -0600, Caleb Phillips wrote:
> Dear Linux WiMax hackers:
> 
> I've searched the mailing list and bugzilla without avail, for what 
> seems like a very obvious problem. Whenever I do a scan, wide or normal, 
> the scan results all return with an identical RSSI and SNR. This 
> behavior can even be seen in the documentation for 1.5.2:

That's because the same exact tower and radios broadcast the IDs for
each of these networks.  CLEAR is the actual provider, but the other 3
are simply "virtual operators" or really "Network Service Providers"
while Clear provides the towers.  So it's no wonder that they all look
exactly the same except for the ID: because they are all coming from the
same exact radios at the base station.

If there was more than one WiMAX provider in your area (not just CLEAR
and 3 others reselling CLEAR under their own name) then you'd see
different results.

Dan

>    $ wimaxcu scan wide
>    Changing Scan mode to Manual Scan mode
>    WARNING: Wide scan may take upto 2 minutes...
>    NSP : CLEAR
>    	ID          : 2
>    	Signal      : Very Good
>    	RSSI        : -66 dBm
>    	CINR        : 22 dB
>    	Network Type: Home Network
>    	Activated.
>    NSP : Time Warner Cable 4G
>    	ID          : 51
>    	Signal      : Very Good
>    	RSSI        : -66 dBm
>    	CINR        : 22 dB
>    	Network Type: Home Network
>    	Activated.
>    NSP : Comcast
>    	ID          : 48
>    	Signal      : Very Good
>    	RSSI        : -66 dBm
>    	CINR        : 22 dB
>    	Network Type: Home Network
>    	Activated.
>    NSP : SPRINT
>    	ID          : 47
>    	Signal      : Very Good
>    	RSSI        : -66 dBm
>    	CINR        : 22 dB
>    	Network Type: Home Network
>    	Activated.
> 
> What's up with this? Am I missing something? I'm a researcher at the 
> University of Colorado and am hoping to use the driver in a measurement 
> platform. So, what I'd really like is more detailed scan results (per 
> station frequency, bsid, CINR, RSSI, etc.). I've tried to determine if 
> this information exists somewhere but as far as I can tell, what's in 
> wimaxd.log is probably my best bet (without substantial, and deep 
> modifications to the driver)?
> 
> Thanks!
> 
> --
> Caleb Phillips
> _______________________________________________
> wimax mailing list
> wimax at linuxwimax.org
> http://lists.linuxwimax.org/listinfo/wimax




[Index of Archives]     [Linux Kernel]     [Linux Wireless]     [Linux Bluetooth]     [Linux Netdev]     [Linux Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux