On Mon, 2011-02-21 at 10:10 +0300, ????????? ?????????? wrote: > Hello > > I manage to connect to YOTA network successfully, and then start dhcp, > but after a few minutes connection is lost. It is a reproducible > error. I used different dhcp clients: dhclient and dhcpcd. Only dhcpcd > outputs error wmx0: carrier lost. Do you have the same problem if you keep a $ ping -i 3 yahoo.com running in a separate window or shell? > Chip: Intel 6250 > Distr - Gentoo x86 > Connect to YOTA (step by step): > 1) wimaxd -i wmx0 -d > 2) wimaxcu ron > 3) wimaxcu connect network 21 (Connection successful) > 4) dhclient wmx0 > 5) ping works and ifconfig output: > wmx0 Link encap:Ethernet HWaddr 00:1d:e1:2f:d8:55 > inet addr:10.117.31.207 Mask:255.255.248.0 > UP RUNNING NOARP MTU:1400 Metric:1 > RX packets:2 errors:0 dropped:0 overruns:0 frame:0 > TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:20 > RX bytes:672 (672.0 B) TX bytes:664 (664.0 B) > > 6) but after a minute ping does not work and ifconfig output: > wmx0 Link encap:Ethernet HWaddr 00:1d:e1:2f:d8:55 > inet addr:10.117.31.207 Mask:255.255.248.0 > UP NOARP MTU:1400 Metric:1 > RX packets:2112 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1851 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:20 > RX bytes:8592400 (8.1 MiB) TX bytes:184321 (180.0 KiB) > > I tried kernel 2.6.36 and 2.6.37: > config: > -*- Networking support ---> > <M> WiMAX Wireless Broadband support ---> > <*> RF switch subsystem support ---> > Device Drivers ---> > [*] Network device support ---> > WiMAX Wireless Broadband devices ---> > <M> Intel Wireless WiMAX Connection 2400 over USB > <M> Intel Wireless WiMAX Connection 2400 over SDIO > [*] Intel Wireless Multicom WiMAX Connection 3200 over > SDIO > (8) WiMAX i2400m debug level > > Installed apps (there were no errors during compilation): > 1) wimax-1.5.1 > 2) wimax-tools-1.4.4 > 3) wpa_supplicant-0.7.3 patched > 4) i2400m-fw-1.5.0 > > I attached logs according to the instructions in FAQ (there are some > errors) > I hope for your help. > _______________________________________________ > wimax mailing list > wimax at linuxwimax.org > http://lists.linuxwimax.org/listinfo/wimax
