On Wed, 2011-01-12 at 03:06 +0300, Anton Nikiforov wrote:
> Dear All!
>
> I was looking for WiMax solution for my Lenovo S10-3t notebook(pad) and
> found out that there is no 64 bit version of utilities available. And i
> can compile and run this version of NetworkServices with -m32 CFLAGS.
> But it is not working.
> Trying to connect to network or scan with wimaxcu always says "No
> network available".
Current git versions of all the tools work correctly on 64-bit x86-64
systems. I don't believe there's been an actual release yet with full
64-bit compat though. What versions of the tools did you get?
Dan
> Could you please help?
>
> wimaxcu/wimaxd running fine with no errors on console but with number of
> errors in logs:
>
> {pid:7864, tid: 4149730160} [1294788756] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788758] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788761] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788763] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788766] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788768] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7864, tid: 4149730160} [1294788768] ./wimax_string.c:58 Error:
> [memcpy_s]Exit Error source buffer is NULL or format is NULL
> {pid:7928, tid: 4149864128} [1294788775] ./iWmxSDK.c:78 Info:
> [iWmxSdk_init]Inited cs : (nil)
> {pid:7928, tid: 4149864128} [1294788775] ./wimax_osal.c:711 Error:
> [wmx_timedjoin_thread]thread join failed. err: 2
> {pid:7928, tid: 4149864128} [1294788775] ./wimax_osal.c:711 Error:
> [wmx_timedjoin_thread]thread join failed. err: 2
> {pid:7928, tid: 4149864128} [1294788775] ./wimax_osal.c:711 Error:
> [wmx_timedjoin_thread]thread join failed. err: 2
> {pid:7928, tid: 4141468528} [1294788776] ./wimax_osal.c:711 Error:
> [wmx_timedjoin_thread]thread join failed. err: 0
> {pid:7928, tid: 4149864128} [1294788776] ./iWmxSDK.c:96 Info:
> [iWmxSdk_fini]About to delete cs: 0x90cc1f0
>
>
> # uname -a
> Linux yourbunnynotepad 2.6.37-rc7-yourbunnynotepad #14 SMP Fri Dec 24
> 18:22:42 MSK 2010 x86_64 GNU/Linux
>
> # lspci -v
> ...cut...
> 07:00.0 Network controller: Intel Corporation WiMAX/WiFi Link 5150
> Subsystem: Intel Corporation WiMAX/WiFi Link 5150 ABG
> Flags: bus master, fast devsel, latency 0, IRQ 42
> Memory at f0200000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: [c8] Power Management version 3
> Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [e0] Express Endpoint, MSI 00
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [140] Device Serial Number 00-16-eb-ff-ff-29-d3-64
> Kernel driver in use: iwlagn
> Kernel modules: iwlagn
>
> # lsmod
> Module Size Used by
> ...cut...
> iwlagn 239717 0
> i2400m_usb 30244 0
> i2400m 102533 1 i2400m_usb
> iwlcore 107768 1 iwlagn
> ...cut....
>
> Everything was compiled with -m32 CFLAGS.
>
