i have newest releases of driver(kernel 2.6.36.1), firmware, tools, manager and wpa_supplicant(patched) from linuxwimax.org Slackware 13.1 I cannot connect to the network. root at netbook:/var/log/wimax# wimaxcu connect network 41 In Manual Scan and Manual Connect Mode Trying to find the networks ... Scanning 80% Done ======- Network found. NSP : Yota ID : 21 Signal : Good RSSI : -70 dBm CINR : 11 dB Network Type: Home Network Activated. Network found. NSP : COMSTAR ID : 41 Signal : Fair RSSI : -75 dBm CINR : 4 dB Network Type: Home Network Activated. Scanning operation completed. Connecting to COMSTAR Network... Connection failure root at netbook:/var/log/wimax# wimaxcu connect network 21 In Manual Scan and Manual Connect Mode Trying to find the networks ... Scanning 80% Done ======- Network found. NSP : Yota ID : 21 Signal : Good RSSI : -69 dBm CINR : 11 dB Network Type: Home Network Activated. Network found. NSP : COMSTAR ID : 41 Signal : Poor RSSI : -85 dBm CINR : 0 dB Network Type: Home Network Activated. Scanning operation completed. Connecting to Yota Network... Connection failure I can't connect to any of the networks. Logs attached. Where to dig? -- -------------------------- Yours, Lockywolf -------------- next part -------------- A non-text attachment was scrubbed... Name: logs.tar.xz Type: application/octet-stream Size: 103592 bytes Desc: not available URL: <http://lists.linuxwimax.org/pipermail/wimax/attachments/20101126/41980f3a/attachment-0001.obj>
