Linux Watchdog

• Date Index

• Re: What to set in struct watchdog_device::bootstatus?, (continued)
  • Re: What to set in struct watchdog_device::bootstatus?, Guenter Roeck
• [PATCH v2 0/3] introduce watchdog driver for Mellanox systems., michaelsh
  • [PATCH v2 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver., michaelsh
    • Re: [PATCH v2 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver., Guenter Roeck
  • [PATCH v2 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., michaelsh
    • Re: [PATCH v2 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., Guenter Roeck
      • RE: [PATCH v2 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., Michael Shych
        • Re: [PATCH v2 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., Guenter Roeck
  • [PATCH v2 3/3] Documentation/watchdog: Add documentation mlx-wdt driver, michaelsh
• [PATCH v8 0/8] support ROHM BD70528 PMIC, Matti Vaittinen
  • [PATCH v8 1/8] mfd: regulator: clk: split rohm-bd718x7.h, Matti Vaittinen
    • Re: [PATCH v8 1/8] mfd: regulator: clk: split rohm-bd718x7.h, Lee Jones
  • [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
    • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Lee Jones
      • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
        • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Lee Jones
          • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
            • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Lee Jones
              • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
      • Re: [PATCH v8 2/8] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [PATCH v8 3/8] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
    • Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings, Lee Jones
      • Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
        • Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings, Guenter Roeck
          • Re: [PATCH v8 4/8] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
  • [PATCH v8 5/8] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [PATCH v8 6/8] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [PATCH v8 7/8] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [PATCH v8 8/8] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
• [PATCH v1 0/3] introduce watchdog driver for Mellanox systems., michaelsh
  • [PATCH v1 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver., michaelsh
  • [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., michaelsh
  • [PATCH v1 3/3] Documentation/watchdog: Add documentation mlx-wdt driver, michaelsh
  • <Possible follow-ups>
  • [PATCH v1 0/3] introduce watchdog driver for Mellanox systems., michaelsh
    • [PATCH v1 1/3] platform_data/mlxreg: addittions for mellanox watchdog driver., michaelsh
    • [PATCH v1 3/3] Documentation/watchdog: Add documentation mlx-wdt driver, michaelsh
    • [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., michaelsh
      • Re: [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., Guenter Roeck
        • RE: [PATCH v1 2/3] watchdog: mlx-wdt: introduce watchdog driver for Mellanox systems., Michael Shych
    • Re: [PATCH v1 0/3] introduce watchdog driver for Mellanox systems., Guenter Roeck
      • RE: [PATCH v1 0/3] introduce watchdog driver for Mellanox systems., Michael Shych
• [PATCH v7 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • [PATCH v7 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [PATCH v7 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
  • [PATCH v7 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
    • Re: [PATCH v7 03/10] clk: bd718x7: use chip specific and generic data structs, Stephen Boyd
  • [PATCH v7 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
    • Re: [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Stephen Boyd
      • Re: [PATCH v7 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [PATCH v7 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
  • [PATCH v7 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [PATCH v7 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [PATCH v7 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [PATCH v7 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
  • Re: [PATCH v7 00/10] support ROHM BD70528 PMIC, Kalle Valo
    • Re: [PATCH v7 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
• [PATCH v6 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • [PATCH v6 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [PATCH v6 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
  • [PATCH v6 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
  • [PATCH v6 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [PATCH v6 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [PATCH v6 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
  • [PATCH v6 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [PATCH v6 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [PATCH v6 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
    • Re: [PATCH v6 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
• [PATCH] watchdog: Update sysfs documentation., Jerry Hoemann
  • Re: [PATCH] watchdog: Update sysfs documentation., Guenter Roeck
• [RFC PATCH v5 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • [RFC PATCH v5 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [RFC PATCH v5 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v5 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v5 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [RFC PATCH v5 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [RFC PATCH v5 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
  • [RFC PATCH v5 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [RFC PATCH v5 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [RFC PATCH v5 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
    • Re: [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
      • Re: [RFC PATCH v5 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
• [RFC PATCH v4 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • [RFC PATCH v4 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [RFC PATCH v4 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v4 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v4 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [RFC PATCH v4 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
    • Re: [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Rob Herring
    • Re: [RFC PATCH v4 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Linus Walleij
  • [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
    • Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Linus Walleij
      • Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
      • Re: [RFC PATCH v4 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Bartosz Golaszewski
  • [RFC PATCH v4 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [RFC PATCH v4 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [RFC PATCH v4 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
• [RFC PATCH v3 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • [RFC PATCH v3 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [RFC PATCH v3 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v3 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v3 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [RFC PATCH v3 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
    • Re: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Rob Herring
      • Re: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
  • [RFC PATCH v3 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [RFC PATCH v3 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
    • Re: [RFC PATCH v3 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Alexandre Belloni
  • [RFC PATCH v3 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [RFC PATCH v3 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
• [PATCH AUTOSEL 4.20 149/304] watchdog: renesas_wdt: don't set divider while watchdog is running, Sasha Levin
• [PATCH AUTOSEL 4.19 125/258] watchdog: renesas_wdt: don't set divider while watchdog is running, Sasha Levin
• [PATCH AUTOSEL 4.14 082/170] watchdog: renesas_wdt: don't set divider while watchdog is running, Sasha Levin
• [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
  • Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
    • Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
      • Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
        • Re: [RFC PATCH v2 10/10] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
• [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Linus Walleij
    • Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
      • Re: [RFC PATCH v2 09/10] power: supply: Initial support for ROHM BD70528 PMIC charger block, Linus Walleij
• [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Guenter Roeck
    • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
      • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Guenter Roeck
        • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
    • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Jerry Hoemann
      • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
        • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Jerry Hoemann
  • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Alexandre Belloni
    • Re: [RFC PATCH v2 08/10] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
• [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • Re: [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Linus Walleij
    • Re: [RFC PATCH v2 07/10] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
• [RFC PATCH v2 06/10] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
• [RFC PATCH v2 05/10] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
• [RFC PATCH v2 04/10] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
• [RFC PATCH v2 03/10] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
• [RFC PATCH v2 02/10] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
• [RFC PATCH v2 01/10] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
• [RFC PATCH v2 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
  • Re: [RFC PATCH v2 00/10] support ROHM BD70528 PMIC, Lee Jones
    • Re: [RFC PATCH v2 00/10] support ROHM BD70528 PMIC, Matti Vaittinen
• [PATCH] watchdog: dw: remove useless pr_fmt, Jisheng Zhang
  • Re: [PATCH] watchdog: dw: remove useless pr_fmt, Guenter Roeck
• [PATCH] watchdog: dw: use devm_watchdog_register_device(), Jisheng Zhang
  • Re: [PATCH] watchdog: dw: use devm_watchdog_register_device(), Guenter Roeck
    • Re: [PATCH] watchdog: dw: use devm_watchdog_register_device(), Jisheng Zhang
      • Re: [PATCH] watchdog: dw: use devm_watchdog_register_device(), Guenter Roeck
• [PATCH -next] watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init, YueHaibing
  • Re: [PATCH -next] watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init, Guenter Roeck
• [RFC PATCH v1 00/13] support ROHM BD70528 PMIC, Matti Vaittinen
  • [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support, Matti Vaittinen
    • Re: [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support, Mark Brown
  • [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts, Matti Vaittinen
  • [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
    • Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs, Mark Brown
      • Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs, Matti Vaittinen
        • Re: [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs, Mark Brown
  • [RFC PATCH v1 04/13] clk: bd718x7: use chip specific and generic data structs, Matti Vaittinen
  • [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
    • Re: [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core, Guenter Roeck
      • Re: [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core, Matti Vaittinen
  • [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block, Matti Vaittinen
  • [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
    • Re: [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings, Rob Herring
      • Re: [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings, Matti Vaittinen
        • Re: [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings, Rob Herring
  • [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block, Matti Vaittinen
  • [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings, Matti Vaittinen
  • [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block, Matti Vaittinen
  • [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
    • Re: [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC, Guenter Roeck
      • Re: [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC, Matti Vaittinen
  • [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block, Matti Vaittinen
  • [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
    • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
      • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
        • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
          • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
            • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Sebastian Reichel
              • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Matti Vaittinen
                • Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block, Guenter Roeck
• [GIT PULL REQUEST] watchdog - v5.0-rc Fixes, Wim Van Sebroeck
  • Re: [GIT PULL REQUEST] watchdog - v5.0-rc Fixes, pr-tracker-bot
• [PATCHv2] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
  • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
  • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Guenter Roeck
    • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
      • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Guenter Roeck
        • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
  • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Stephen Boyd
    • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Guenter Roeck
      • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Jerry Hoemann
        • Re: [PATCHv2] watchdog: qcom: Add suspend/resume support, Guenter Roeck
• [PATCH] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
  • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Brian Masney
    • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
      • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Brian Masney
        • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
          • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Guenter Roeck
            • Re: [PATCH] watchdog: qcom: Add suspend/resume support, Sai Prakash Ranjan
• [PATCH v8 0/3] watchdog: allow setting deadline for opening /dev/watchdogN, Rasmus Villemoes
  • [PATCH v8 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Rasmus Villemoes
    • Re: [PATCH v8 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Guenter Roeck
  • [PATCH v8 3/3] watchdog: make the device time out at open_deadline when open_timeout is used, Rasmus Villemoes
  • [PATCH v8 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT, Rasmus Villemoes
  • Re: [PATCH v8 0/3] watchdog: allow setting deadline for opening /dev/watchdogN, Esben Haabendal
  • [PATCH v9 0/3] watchdog: allow setting deadline for opening /dev/watchdogN, Rasmus Villemoes
    • [PATCH v9 3/3] watchdog: make the device time out at open_deadline when open_timeout is used, Rasmus Villemoes
    • [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Rasmus Villemoes
      • Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Guenter Roeck
        • Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Rasmus Villemoes
          • Re: [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter, Rasmus Villemoes
    • [PATCH v9 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT, Rasmus Villemoes
    • Re: [PATCH v9 0/3] watchdog: allow setting deadline for opening /dev/watchdogN, Jerry Hoemann
      • Re: [PATCH v9 0/3] watchdog: allow setting deadline for opening /dev/watchdogN, Rasmus Villemoes
• Re: [PATCH] watchdog: mt7621: Fix compiler error, missing include, Matthias Brugger
  • Re: [PATCH] watchdog: mt7621: Fix compiler error, missing include, René van Dorst
• [PATCH RESEND v8 0/6] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH RESEND v8 2/6] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
  • [PATCH RESEND v8 6/6] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
  • [PATCH RESEND v8 5/6] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
  • [PATCH RESEND v8 3/6] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
  • [PATCH RESEND v8 1/6] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
  • [PATCH RESEND v8 4/6] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
  • [GIT PULL] Immutable branch between MFD, Input and Watchdog due for the v5.1 merge window, Lee Jones
• [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled, Ivan Mironov
  • [RFC PATCH 3/4] watchdog: hpwdt: Add more information into message, Ivan Mironov
  • [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable, Ivan Mironov
    • Re: [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable, Jerry Hoemann
      • Re: [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable, Ivan Mironov
  • [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Ivan Mironov
    • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Jerry Hoemann
      • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Guenter Roeck
      • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Ivan Mironov
        • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Jerry Hoemann
          • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Guenter Roeck
          • Re: [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI, Ivan Mironov
  • [RFC PATCH 2/4] watchdog: hpwdt: Don't panic on foreign NMI, Ivan Mironov
  • Re: [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled, Jerry Hoemann
    • Re: [RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled, Ivan Mironov
• [PATCH] watchdog: wm831x: Use GPIO descriptor, Linus Walleij
  • Re: [PATCH] watchdog: wm831x: Use GPIO descriptor, Guenter Roeck
• [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs, Dan Carpenter
  • Re: [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs, Andrew Lunn
  • Re: [PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs, Guenter Roeck
• [GIT PULL REQUEST] watchdog - v4.21 Merge window, Wim Van Sebroeck
  • Re: [GIT PULL REQUEST] watchdog - v4.21 Merge window, pr-tracker-bot
• [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c, NeilBrown
  • Re: [PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c, Guenter Roeck
• [PATCH v9 00/27] Ingenic TCU patchset v9, Paul Cercueil
  • [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware, Paul Cercueil
  • [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set, Paul Cercueil
  • [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz, Paul Cercueil
  • [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code, Paul Cercueil
  • [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers, Paul Cercueil
  • [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver, Paul Cercueil
  • [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz, Paul Cercueil
  • [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz, Paul Cercueil
  • [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers, Paul Cercueil
  • [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree, Paul Cercueil
  • [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST, Paul Cercueil
  • [PATCH v9 18/27] clk: jz4740: Add TCU clock, Paul Cercueil
  • [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings, Paul Cercueil
  • [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1, Paul Cercueil
  • [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver, Paul Cercueil
    • Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver, Uwe Kleine-König
      • Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver, Paul Cercueil
        • Re: [PATCH v9 13/27] pwm: jz4740: Use clocks from TCU driver, Uwe Kleine-König
  • [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Paul Cercueil
    • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Uwe Kleine-König
      • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Paul Cercueil
        • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Uwe Kleine-König
          • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Paul Cercueil
            • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Paul Cercueil
              • Re: [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation, Stephen Boyd
  • [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver, Paul Cercueil
  • [PATCH v9 08/27] watchdog: jz4740: Use regmap provided by TCU driver, Paul Cercueil
  • [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver, Paul Cercueil
    • Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver, Uwe Kleine-König
      • Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver, Paul Cercueil
        • Re: [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver, Uwe Kleine-König
  • [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST, Paul Cercueil
  • [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically, Paul Cercueil
  • [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout, Paul Cercueil
  • [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
  • [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers, Paul Cercueil
  • [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver, Paul Cercueil
    • Re: [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver, Daniel Lezcano
      • Re: [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver, Paul Cercueil
  • [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
    • Re: [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers, Rob Herring
  • [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks, Paul Cercueil
• [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
  • Re: [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor, Guenter Roeck
  • Re: [PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor, Paul Burton
• [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
  • Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller, Guenter Roeck
    • Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
      • Re: [PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller, Guenter Roeck
• [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
  • <Possible follow-ups>
  • Re: [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller, Guenter Roeck
    • Re: [PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
• [PATCH] watchdog: add documentation for PM usage, Wolfram Sang
  • Re: [PATCH] watchdog: add documentation for PM usage, Guenter Roeck
  • Re: [PATCH] watchdog: add documentation for PM usage, Geert Uytterhoeven
• [PATCH] watchdog: docs: kernel-api: don't reference removed functions, Wolfram Sang
  • Re: [PATCH] watchdog: docs: kernel-api: don't reference removed functions, Guenter Roeck
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support, Fabrizio Castro
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support, Geert Uytterhoeven
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support, Simon Horman
  • Re: dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support, Guenter Roeck
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support, Rob Herring
• [PATCH v4 0/5] BCM2835 PM driver, Eric Anholt
  • [PATCH v4 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4), Eric Anholt
  • [PATCH v4 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD., Eric Anholt
  • [PATCH v4 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4), Eric Anholt
  • [PATCH v4 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding., Eric Anholt
  • [PATCH v4 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware., Eric Anholt
  • Re: [PATCH v4 0/5] BCM2835 PM driver, Stefan Wahren
    • Re: [PATCH v4 0/5] BCM2835 PM driver, Stefan Wahren
• [PATCH v8 00/26] Ingenic TCU patchset v8, Paul Cercueil
  • [PATCH v8 25/26] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers, Paul Cercueil
  • [PATCH v8 26/26] MIPS: jz4740: Drop obsolete code, Paul Cercueil
  • [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Paul Cercueil
    • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Uwe Kleine-König
      • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Paul Cercueil
        • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Thierry Reding
        • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Uwe Kleine-König
          • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Linus Walleij
            • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Uwe Kleine-König
              • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Linus Walleij
              • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Paul Cercueil
                • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Uwe Kleine-König
                  • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Thierry Reding
                    • Re: [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B, Uwe Kleine-König
  • [PATCH v8 13/26] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST, Paul Cercueil
  • [PATCH v8 10/26] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST, Paul Cercueil
  • [PATCH v8 18/26] MIPS: jz4740: Add DTS nodes for the TCU drivers, Paul Cercueil
  • [PATCH v8 06/26] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers, Paul Cercueil
  • [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
    • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Mathieu Malaterre
      • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Guenter Roeck
        • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
          • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Guenter Roeck
            • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Stephen Boyd
              • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
                • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Stephen Boyd
                  • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
                    • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
                      • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Stephen Boyd
                        • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
      • Re: [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST, Paul Cercueil
  • [PATCH v8 16/26] clk: jz4740: Add TCU clock, Paul Cercueil
  • [PATCH v8 02/26] doc: Add doc for the Ingenic TCU hardware, Paul Cercueil
  • [PATCH v8 07/26] watchdog: jz4740: Use WDT clock provided by TCU driver, Paul Cercueil
  • [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Paul Cercueil
    • Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Uwe Kleine-König
      • Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Paul Cercueil
        • Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Uwe Kleine-König
          • Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Paul Cercueil
            • Re: [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1, Uwe Kleine-König
  • [PATCH v8 14/26] pwm: jz4740: Remove unused devicetree compatible strings, Paul Cercueil
  • [PATCH v8 20/26] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz, Paul Cercueil
  • [PATCH v8 09/26] watchdog: jz4740: Avoid starting watchdog in set_timeout, Paul Cercueil
  • [PATCH v8 04/26] clocksource: Add a new timer-ingenic driver, Paul Cercueil
  • [PATCH v8 08/26] watchdog: jz4740: Use regmap provided by TCU driver, Paul Cercueil
  • [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver, Paul Cercueil
    • Re: [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver, Uwe Kleine-König
      • Re: [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver, Paul Cercueil
  • [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
    • Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers, Rob Herring
      • Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
        • Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers, Rob Herring
          • Re: [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers, Paul Cercueil
  • [PATCH v8 17/26] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set, Paul Cercueil
  • [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks, Paul Cercueil
    • Re: [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks, Stephen Boyd
  • [PATCH v8 21/26] MIPS: CI20: Reduce system timer and clocksource to 3 MHz, Paul Cercueil
  • [PATCH v8 22/26] MIPS: CI20: defconfig: enable OST driver, Paul Cercueil
  • [PATCH v8 19/26] MIPS: qi_lb60: Move PWM devices to devicetree, Paul Cercueil
  • [PATCH v8 23/26] MIPS: GCW0: Move clocksource to TCU channel 2, Paul Cercueil
  • [PATCH v8 24/26] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz, Paul Cercueil
  • Re: [PATCH v8 00/26] Ingenic TCU patchset v8, Mathieu Malaterre
    • Re: [PATCH v8 00/26] Ingenic TCU patchset v8, Paul Cercueil
• [PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
  • Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor, Guenter Roeck
    • Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
      • Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor, Guenter Roeck
        • Re: [v3] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
  • Re: [PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor, Florian Fainelli
• [PATCH v2] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
  • Re: [PATCH v2] watchdog: tqmx86: Add watchdog driver for the IO controller, Guenter Roeck
• [PATCH] Watchdog: remove outdated comment, Hardik Singh Rathore
  • Re: [PATCH] Watchdog: remove outdated comment, Guenter Roeck
• [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
  • Re: [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller, Guenter Roeck
    • Re: [PATCH] watchdog: tqmx86: Add watchdog driver for the IO controller, Andrew Lunn
• [PATCH v2 0/3] watchdog/hpwdt: Do not claim on unsupported hardware, Jerry Hoemann
  • [PATCH v2 2/3] watchdog/hpwdt: Do not claim unsupported hardware, Jerry Hoemann
    • Re: [PATCH v2 2/3] watchdog/hpwdt: Do not claim unsupported hardware, Guenter Roeck
  • [PATCH v2 1/3] watchdog/hpwdt: Exclude via blacklist, Jerry Hoemann
    • Re: [PATCH v2 1/3] watchdog/hpwdt: Exclude via blacklist, Guenter Roeck
  • [PATCH v2 3/3] watchdog/hpwdt: Update driver version., Jerry Hoemann
    • Re: [PATCH v2 3/3] watchdog/hpwdt: Update driver version., Guenter Roeck
• [PATCH 1/1] watchdog/hpwdt: Do not claim unsupported hardware, Jerry Hoemann
  • Re: [PATCH 1/1] watchdog/hpwdt: Do not claim unsupported hardware, Guenter Roeck
• [PATCH v2] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
• [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Wolfram Sang
  • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Geert Uytterhoeven
  • RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Fabrizio Castro
  • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Guenter Roeck
    • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Wolfram Sang
      • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Guenter Roeck
        • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Wolfram Sang
          • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Guenter Roeck
            • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Wolfram Sang
            • RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Fabrizio Castro
              • Re: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Guenter Roeck
                • RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Fabrizio Castro
      • RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Fabrizio Castro
  • RE: [RFC] watchdog: renesas_wdt: don't keep timer value during suspend/resume, Fabrizio Castro
• x86_64 NMI watchdog false positive, watchdog_overflow_callback fires at random period, Lin Feng
  • Re: x86_64 NMI watchdog false positive, watchdog_overflow_callback fires at random period, Guenter Roeck
• [PATCH] watchdog: mtx-1: Convert to use GPIO descriptor, Linus Walleij
  • Re: [PATCH] watchdog: mtx-1: Convert to use GPIO descriptor, Florian Fainelli
• [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors, Linus Walleij
  • Re: [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors, Johannes Thumshirn
    • Re: [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors, Linus Walleij
  • Re: watchdog: mena21_wdt: Convert to GPIO descriptors, Guenter Roeck
• [PATCH 0/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Yangtao Li
  • [PATCH 1/2] watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE, Yangtao Li
    • Re: [PATCH 1/2] watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE, Guenter Roeck
  • [PATCH 2/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Yangtao Li
    • Re: [PATCH 2/2] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Guenter Roeck
• [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Yangtao Li
  • Re: [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Guenter Roeck
    • Re: [PATCH] watchdog: convert to DEFINE_SHOW_ATTRIBUTE, Frank Lee
• [PATCH v3 0/5] BCM2835 PM driver (MFD version respin), Eric Anholt
  • [PATCH v3 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD., Eric Anholt
    • Re: [PATCH v3 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD., Guenter Roeck
  • [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node., Eric Anholt
    • Re: [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node., Rob Herring
    • Re: [PATCH v3 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node., Stefan Wahren
  • [PATCH v3 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware., Eric Anholt
  • [PATCH v3 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding., Eric Anholt
    • Re: [PATCH v3 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding., Rob Herring
  • [PATCH v3 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block., Eric Anholt
• [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH v7 5/7] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
  • [PATCH v7 6/7] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
  • [PATCH v7 7/7] regulator: stpmic1: fix regulator_lock usage, Pascal PAILLET-LME
  • [PATCH v7 4/7] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
  • [PATCH v7 1/7] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
  • [PATCH v7 2/7] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
  • [PATCH v7 3/7] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
  • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Lee Jones
    • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
      • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Lee Jones
        • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
          • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Lee Jones
            • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Mark Brown
  • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Lee Jones
    • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
    • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, dmitry.torokhov@xxxxxxxxx
      • Re: [PATCH v7 0/7] Introduce STPMIC1 PMIC Driver, Lee Jones
• [PATCH] watchdog: asm9260_wdt: make array mode_name static, shrinks object size, Colin King
  • Re: [PATCH] watchdog: asm9260_wdt: make array mode_name static, shrinks object size, Guenter Roeck
• [PATCH v6 0/8] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH v6 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
  • [PATCH v6 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
  • [PATCH v6 6/8] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
  • [PATCH v6 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
  • [PATCH v6 5/8] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
  • [PATCH v6 1/8] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
  • [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
    • Re: [PATCH v6 2/8] mfd: stpmic1: add stpmic1 driver, Lee Jones
  • [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Pascal PAILLET-LME
    • Re: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Mark Brown
      • Re: [PATCH v6 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Pascal PAILLET-LME
• [PATCH v3 1/3] watchdog: Add pm8916 watchdog driver, Loic Poulain
  • [PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Loic Poulain
    • Re: [PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Rob Herring
    • Re: [v3,2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Guenter Roeck
  • [PATCH v3 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node, Loic Poulain
    • Re: [v3,3/3] arm64: dts: qcom: pm8916: Add PON watchdog node, Guenter Roeck
  • Re: [PATCH v3 1/3] watchdog: Add pm8916 watchdog driver, Guenter Roeck
• [PATCH v2 1/3] watchdog: Add pm8916 watchdog driver, Loic Poulain
  • [PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Loic Poulain
    • Re: [PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Guenter Roeck
  • [PATCH v2 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node, Loic Poulain
  • Re: [PATCH v2 1/3] watchdog: Add pm8916 watchdog driver, Guenter Roeck
• [PATCH v2 0/5] BCM2835 PM driver (MFD version), Eric Anholt
  • [PATCH v2 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware., Eric Anholt
  • [PATCH v2 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding., Eric Anholt
  • [PATCH v2 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD., Eric Anholt
    • Re: [PATCH v2 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD., Guenter Roeck
  • [PATCH v2 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block., Eric Anholt
  • [PATCH v2 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node., Eric Anholt
• [PATCH 0/8] BCM2835 PM driver, Eric Anholt
  • [PATCH 4/8] soc: bcm: bcm2835-pm: Make some little accessor macros for the mmio area., Eric Anholt
  • [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory., Eric Anholt
    • Re: [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory., Guenter Roeck
  • [PATCH 3/8] soc: bcm: bcm2835-pm: Stop using _relaxed mmio accessors., Eric Anholt
  • [PATCH 5/8] dt-bindings: soc: Add a new binding for the BCM2835 PM node., Eric Anholt
  • [PATCH 2/8] soc: bcm: bcm2835-pm: Rename the driver to its new "PM" name., Eric Anholt
  • [PATCH 8/8] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware., Eric Anholt
  • [PATCH 7/8] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block., Eric Anholt
  • [PATCH 6/8] soc: bcm: bcm2835-pm: Add support for power domains under a new binding., Eric Anholt
  • Re: [PATCH 0/8] BCM2835 PM driver, Stefan Wahren
    • Re: [PATCH 0/8] BCM2835 PM driver, Eric Anholt
      • Re: [PATCH 0/8] BCM2835 PM driver, Arnd Bergmann
• [PATCH] kbuild: announce removal of SUBDIRS if used, Masahiro Yamada
  • Re: [PATCH] kbuild: announce removal of SUBDIRS if used, Boris Brezillon
  • Re: [PATCH] kbuild: announce removal of SUBDIRS if used, Guenter Roeck
    • Re: [PATCH] kbuild: announce removal of SUBDIRS if used, Masahiro Yamada
  • Re: [PATCH] kbuild: announce removal of SUBDIRS if used, David Woodhouse
    • Re: [PATCH] kbuild: announce removal of SUBDIRS if used, Masahiro Yamada
• [PATCH v2] watchdog: cpwd: add of_node_put(), Yangtao Li
  • Re: [PATCH v2] watchdog: cpwd: add of_node_put(), Guenter Roeck
• [PATCH] watchdog: cpwd: add of_node_put(), Yangtao Li
  • Re: [PATCH] watchdog: cpwd: add of_node_put(), Guenter Roeck
    • Re: [PATCH] watchdog: cpwd: add of_node_put(), Frank Lee
• [PATCH] watchdog: w83627hf_wdt: Add quirk for Inves system, Jean Delvare
  • Re: [PATCH] watchdog: w83627hf_wdt: Add quirk for Inves system, Guenter Roeck
• [PATCH 1/3] watchdog: Add pm8916 watchdog driver, Loic Poulain
  • [PATCH 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog, Loic Poulain
  • [PATCH 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node, Loic Poulain
  • Re: [PATCH 1/3] watchdog: Add pm8916 watchdog driver, Guenter Roeck
• [PATCH] watchdog: core: suppress "watchdog did not stop" message, Tao Ren
  • Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message, Guenter Roeck
    • Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message, Tao Ren
      • Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message, Jerry Hoemann
        • Re: [PATCH] watchdog: core: suppress "watchdog did not stop" message, Tao Ren
• [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running, Wolfram Sang
  • RE: [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running, Fabrizio Castro
  • Re: [PATCH v2] watchdog: renesas_wdt: don't set divider while watchdog is running, Guenter Roeck
• [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Ryder Lee
  • Message not available
    • Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Ryder Lee
  • Re: dt-bindings: watchdog: update bindings for MT7629 SoC, Guenter Roeck
  • Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Matthias Brugger
    • Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Ryder Lee
      • Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Guenter Roeck
        • Re: [PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC, Ryder Lee
• [PATCH v1] watchdog: npcm: Modify npcm watchdog kconfig arch parameter, Tomer Maimon
  • Re: [PATCH v1] watchdog: npcm: Modify npcm watchdog kconfig arch parameter, Guenter Roeck
• [PATCH v2] watchdog: renesas_wdt: Fix typos, Fabrizio Castro
  • Re: [PATCH v2] watchdog: renesas_wdt: Fix typos, Simon Horman
  • Re: [PATCH v2] watchdog: renesas_wdt: Fix typos, Wolfram Sang
• [PATCH] watchdog: renesas_wdt: Fix typos, Fabrizio Castro
  • Re: [PATCH] watchdog: renesas_wdt: Fix typos, Guenter Roeck
    • Re: [PATCH] watchdog: renesas_wdt: Fix typos, Geert Uytterhoeven
    • RE: [PATCH] watchdog: renesas_wdt: Fix typos, Fabrizio Castro
• [PATCH v5 0/8] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
    • Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver, Lee Jones
      • Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
        • Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver, Lee Jones
  • [PATCH v5 1/8] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
    • Re: [PATCH v5 1/8] dt-bindings: mfd: document stpmic1, Rob Herring
    • Re: [PATCH v5 1/8] dt-bindings: mfd: document stpmic1, Lee Jones
  • [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
    • Re: [PATCH v5 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog, Guenter Roeck
  • [PATCH v5 6/8] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
  • [PATCH v5 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
  • [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
    • Re: [PATCH v5 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Guenter Roeck
  • [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Pascal PAILLET-LME
    • Re: [PATCH v5 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Rob Herring
  • [PATCH v5 5/8] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
• [GIT PULL REQUEST] watchdog - v4.20 Merge window, Wim Van Sebroeck
  • Re: [GIT PULL REQUEST] watchdog - v4.20 Merge window, Linus Torvalds
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Biju Das
  • RE: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Fabrizio Castro
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Simon Horman
    • RE: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Biju Das
      • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Guenter Roeck
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Rob Herring
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support, Geert Uytterhoeven
• [PATCH v4 0/8] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
    • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Rob Herring
    • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Lee Jones
      • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Rob Herring
        • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Lee Jones
          • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
            • Re: [PATCH v4 1/8] dt-bindings: mfd: document stpmic1, Lee Jones
  • [PATCH v4 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
  • [PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
    • Re: [PATCH v4 6/8] input: stpmic1: add stpmic1 onkey driver, dmitry.torokhov@xxxxxxxxx
  • [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
    • Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver, Lee Jones
      • Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver, Benjamin Gaignard
        • Re: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver, Lee Jones
  • [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
    • Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Mark Brown
      • Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
        • Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Mark Brown
          • Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
            • Re: [PATCH v4 4/8] regulator: stpmic1: add stpmic1 regulator driver, Mark Brown
  • [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
    • Re: [PATCH v4 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Guenter Roeck
  • [PATCH v4 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Pascal PAILLET-LME
  • [PATCH v4 5/8] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
• [PATCH] watchdog: ts4800: release syscon device node in ts4800_wdt_probe(), Alexey Khoroshilov
  • Re: [PATCH] watchdog: ts4800: release syscon device node in ts4800_wdt_probe(), Guenter Roeck
• watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [gnome-shell:1112], Cristian
• [PATCH watchdog-next] watchdog: armada_37xx_wdt: use do_div for u64 division, Marek Behún
  • Re: [PATCH watchdog-next] watchdog: armada_37xx_wdt: use do_div for u64 division, Guenter Roeck
• [PATCH v3 0/8] Introduce STPMIC1 PMIC Driver, Pascal PAILLET-LME
  • [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
    • Re: [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey, Pascal PAILLET-LME
    • Re: [PATCH v3 5/8] dt-bindings: input: document stpmic1 pmic onkey, Rob Herring
  • [PATCH v3 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Pascal PAILLET-LME
    • Re: [PATCH v3 3/8] dt-bindings: regulator: document stpmic1 pmic regulators, Rob Herring
  • [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver, Pascal PAILLET-LME
    • Re: [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver, dmitry.torokhov@xxxxxxxxx
  • [PATCH v3 2/8] mfd: stpmic1: add stpmic1 driver, Pascal PAILLET-LME
  • [PATCH v3 4/8] regulator: stpmic1: add stpmic1 regulator driver, Pascal PAILLET-LME
  • [PATCH v3 7/8] dt-bindings: watchdog: document stpmic1 pmic watchdog, Pascal PAILLET-LME
  • [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Pascal PAILLET-LME
    • Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Randy Dunlap
    • Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, kbuild test robot
      • Re: [PATCH v3 8/8] watchdog: stpmic1: add stpmic1 watchdog driver, Guenter Roeck
  • [PATCH v3 1/8] dt-bindings: mfd: document stpmic1, Pascal PAILLET-LME
    • Re: [PATCH v3 1/8] dt-bindings: mfd: document stpmic1, Rob Herring
• Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers, Daniel Lezcano
  • <Possible follow-ups>
  • Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers, Daniel Lezcano
  • Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers, Alexandre Belloni
  • Re: [PATCH v5 04/21] dt-bindings: Add doc for the Ingenic TCU drivers, Lee Jones
• [PATCH] MAINTAINERS: Fix file pattern for MEN Z069 watchdog driver, Guenter Roeck
  • <Possible follow-ups>
  • Re: [PATCH] MAINTAINERS: Fix file pattern for MEN Z069 watchdog driver, Wim Van Sebroeck
• Bad MAINTAINERS pattern in section 'MEN Z069 WATCHDOG DRIVER', Joe Perches
• Default behavior of watchdog drivers, Jean Delvare
  • Re: Default behavior of watchdog drivers, Guenter Roeck
    • Re: Default behavior of watchdog drivers, Giel van Schijndel
  • <Possible follow-ups>
  • Re: Default behavior of watchdog drivers, Wim Van Sebroeck
    • Re: Default behavior of watchdog drivers, Guenter Roeck
      • Re: Default behavior of watchdog drivers, Wim Van Sebroeck
        • Re: Default behavior of watchdog drivers, Guenter Roeck
• [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support, Biju Das
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support, Simon Horman
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support, Geert Uytterhoeven
  • Re: dt-bindings: watchdog: renesas-wdt: Document r8a7744 support, Guenter Roeck
  • Re: [PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a7744 support, Rob Herring
• [PATCH v5 0/2] Add support for RZ/A2 wdt, Chris Brandt
  • [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210, Chris Brandt
    • Re: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210, Simon Horman
    • Re: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210, Rob Herring
      • RE: [PATCH v5 2/2] dt-bindings: watchdog: renesas-wdt: Add support for R7S9210, Chris Brandt
  • [PATCH v5 1/2] watchdog: rza_wdt: Support longer timeouts, Chris Brandt
• [PATCH v4 0/4] Add support for Armada 37xx CPU watchdog, Marek Behún
  • [PATCH v4 3/4] documentation: watchdog: add documentation for armada-37xx-wdt, Marek Behún
  • [PATCH v4 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding, Marek Behún
    • Re: [PATCH v4 2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding, Rob Herring
    • Re: [v4,2/4] dt-bindings: watchdog: Document armada-37xx-wdt binding, Guenter Roeck
  • [PATCH v4 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog, Marek Behún
    • Re: [PATCH v4 4/4] arm64: dts: marvell: armada-37xx: add nodes to support watchdog, Gregory CLEMENT
  • [PATCH v4 1/4] watchdog: Add support for Armada 37xx CPU watchdog, Marek Behún