On Fri, Jul 31, 2020 at 07:03:33AM +0800, Anson Huang wrote: > When kernel idle, system will enter wait/stop mode, wdog should continue > running in this scenario, and the refresh thread can wake up system from > wait/stop mode. > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > no change. > --- > drivers/watchdog/imx7ulp_wdt.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c > index badfc0b..922b603 100644 > --- a/drivers/watchdog/imx7ulp_wdt.c > +++ b/drivers/watchdog/imx7ulp_wdt.c > @@ -22,6 +22,8 @@ > #define WDOG_CS_CLK (LPO_CLK << LPO_CLK_SHIFT) > #define WDOG_CS_EN BIT(7) > #define WDOG_CS_UPDATE BIT(5) > +#define WDOG_CS_WAIT BIT(1) > +#define WDOG_CS_STOP BIT(0) > > #define WDOG_CNT 0x4 > #define WDOG_TOVAL 0x8 > @@ -187,7 +189,8 @@ static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout) > /* set an initial timeout value in TOVAL */ > writel(timeout, base + WDOG_TOVAL); > /* enable 32bit command sequence and reconfigure */ > - val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE; > + val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE | > + WDOG_CS_WAIT | WDOG_CS_STOP; > writel(val, base + WDOG_CS); > imx7ulp_wdt_wait(base, WDOG_CS_RCS); >
