According to reference manual, the i.MX7ULP WDOG's operations should follow below sequence: 1. disable global interrupts; 2. unlock the wdog and wait unlock bit set; 3. reconfigure the wdog and wait for reconfiguration bit set; 4. enabel global interrupts. Strictly follow the recommended sequence can make it more robust. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> --- Changes since V1: - use readl_poll_timeout_atomic() instead of usleep_ranges() since IRQ is disabled. --- drivers/watchdog/imx7ulp_wdt.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c index 7993c8c..7d2b12e 100644 --- a/drivers/watchdog/imx7ulp_wdt.c +++ b/drivers/watchdog/imx7ulp_wdt.c @@ -5,6 +5,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> @@ -36,6 +37,7 @@ #define DEFAULT_TIMEOUT 60 #define MAX_TIMEOUT 128 #define WDOG_CLOCK_RATE 1000 +#define WDOG_WAIT_TIMEOUT 10000 static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0000); @@ -48,17 +50,31 @@ struct imx7ulp_wdt_device { struct clk *clk; }; +static inline void imx7ulp_wdt_wait(void __iomem *base, u32 mask) +{ + u32 val = readl(base + WDOG_CS); + + if (!(val & mask)) + WARN_ON(readl_poll_timeout_atomic(base + WDOG_CS, val, + val & mask, 0, + WDOG_WAIT_TIMEOUT)); +} + static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable) { struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog); u32 val = readl(wdt->base + WDOG_CS); + local_irq_disable(); writel(UNLOCK, wdt->base + WDOG_CNT); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK); if (enable) writel(val | WDOG_CS_EN, wdt->base + WDOG_CS); else writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + local_irq_enable(); } static bool imx7ulp_wdt_is_enabled(void __iomem *base) @@ -72,7 +88,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog) { struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog); + local_irq_disable(); + writel(UNLOCK, wdt->base + WDOG_CNT); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK); writel(REFRESH, wdt->base + WDOG_CNT); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + local_irq_enable(); return 0; } @@ -98,8 +119,12 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog, struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog); u32 val = WDOG_CLOCK_RATE * timeout; + local_irq_disable(); writel(UNLOCK, wdt->base + WDOG_CNT); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK); writel(val, wdt->base + WDOG_TOVAL); + imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + local_irq_enable(); wdog->timeout = timeout; @@ -140,15 +165,19 @@ static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout) { u32 val; + local_irq_disable(); /* unlock the wdog for reconfiguration */ writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT); writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT); + imx7ulp_wdt_wait(base, WDOG_CS_ULK); /* set an initial timeout value in TOVAL */ writel(timeout, base + WDOG_TOVAL); /* enable 32bit command sequence and reconfigure */ val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE; writel(val, base + WDOG_CS); + imx7ulp_wdt_wait(base, WDOG_CS_RCS); + local_irq_enable(); } static void imx7ulp_wdt_action(void *data) -- 2.7.4