On Wed, Mar 23, 2016 at 05:05:02PM -0500, Matthew McClintock wrote:
> Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree binding") moved
> to use the watchdog as a subset timer register block. Some devices have the
> watchdog completely standalone with slightly different register offsets as
> well so let's account for the differences here.
>
> Signed-off-by: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
> ---
> drivers/watchdog/qcom-wdt.c | 69 ++++++++++++++++++++++++++++++++-------------
> 1 file changed, 49 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index 20563cc..e46f18d 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -19,17 +19,37 @@
> #include <linux/platform_device.h>
> #include <linux/watchdog.h>
>
> -#define WDT_RST 0x38
> -#define WDT_EN 0x40
> -#define WDT_BITE_TIME 0x5C
> +enum wdt_reg {
> + WDT_RST,
> + WDT_EN,
> + WDT_BITE_TIME,
> +};
> +
> +static const u32 reg_offset_data_apcs_tmr[] = {
> + [WDT_RST] = 0x38,
> + [WDT_EN] = 0x40,
> + [WDT_BITE_TIME] = 0x5C,
> +};
> +
> +static const u32 reg_offset_data_kpss[] = {
> + [WDT_RST] = 0x4,
> + [WDT_EN] = 0x8,
Does this work ? In the datasheet I have in front of me (APQ8064), the watchdog
at this address uses different bits. At address 0x40 (eg GSS_A5_APCS_WDT0_EN),
bit 0 is the enable bit, and bit 1 enables interrupts. At address 0x08 (eg
LPASS_QDSP6SS_WDOG_UNMASKED_INT_EN), bit 0 enables interrupts and bit 1 is
undefined. Or does "qcom,kpss-standalone" refer to some other watchdog ?
Thanks,
Guenter
> + [WDT_BITE_TIME] = 0x14,
> +};
>
> struct qcom_wdt {
> struct watchdog_device wdd;
> struct clk *clk;
> unsigned long rate;
> void __iomem *base;
> + const u32 *layout;
> };
>
> +static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
> +{
> + return wdt->base + wdt->layout[reg];
> +}
> +
> static inline
> struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
> {
> @@ -40,10 +60,10 @@ static int qcom_wdt_start(struct watchdog_device *wdd)
> {
> struct qcom_wdt *wdt = to_qcom_wdt(wdd);
>
> - writel(0, wdt->base + WDT_EN);
> - writel(1, wdt->base + WDT_RST);
> - writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
> - writel(1, wdt->base + WDT_EN);
> + writel(0, wdt_addr(wdt, WDT_EN));
> + writel(1, wdt_addr(wdt, WDT_RST));
> + writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
> + writel(1, wdt_addr(wdt, WDT_EN));
> return 0;
> }
>
> @@ -51,7 +71,7 @@ static int qcom_wdt_stop(struct watchdog_device *wdd)
> {
> struct qcom_wdt *wdt = to_qcom_wdt(wdd);
>
> - writel(0, wdt->base + WDT_EN);
> + writel(0, wdt_addr(wdt, WDT_EN));
> return 0;
> }
>
> @@ -59,7 +79,7 @@ static int qcom_wdt_ping(struct watchdog_device *wdd)
> {
> struct qcom_wdt *wdt = to_qcom_wdt(wdd);
>
> - writel(1, wdt->base + WDT_RST);
> + writel(1, wdt_addr(wdt, WDT_RST));
> return 0;
> }
>
> @@ -82,10 +102,10 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
> */
> timeout = 128 * wdt->rate / 1000;
>
> - writel(0, wdt->base + WDT_EN);
> - writel(1, wdt->base + WDT_RST);
> - writel(timeout, wdt->base + WDT_BITE_TIME);
> - writel(1, wdt->base + WDT_EN);
> + writel(0, wdt_addr(wdt, WDT_EN));
> + writel(1, wdt_addr(wdt, WDT_RST));
> + writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
> + writel(1, wdt_addr(wdt, WDT_EN));
>
> /*
> * Actually make sure the above sequence hits hardware before sleeping.
> @@ -112,14 +132,29 @@ static const struct watchdog_info qcom_wdt_info = {
> .identity = KBUILD_MODNAME,
> };
>
> +static const struct of_device_id qcom_wdt_of_table[] = {
> + { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
> + { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
> + { .compatible = "qcom,kpss-standalone", .data = ®_offset_data_kpss},
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
> +
> static int qcom_wdt_probe(struct platform_device *pdev)
> {
> struct qcom_wdt *wdt;
> struct resource *res;
> struct device_node *np = pdev->dev.of_node;
> + const struct of_device_id *match;
> u32 percpu_offset;
> int ret;
>
> + match = of_match_node(qcom_wdt_of_table, np);
> + if (!match) {
> + dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
> + return -ENODEV;
> + }
> +
> wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> if (!wdt)
> return -ENOMEM;
> @@ -170,6 +205,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
> wdt->wdd.min_timeout = 1;
> wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
> wdt->wdd.parent = &pdev->dev;
> + wdt->layout = match->data;
>
> /*
> * If 'timeout-sec' unspecified in devicetree, assume a 30 second
> @@ -202,13 +238,6 @@ static int qcom_wdt_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id qcom_wdt_of_table[] = {
> - { .compatible = "qcom,kpss-timer" },
> - { .compatible = "qcom,scss-timer" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
> -
> static struct platform_driver qcom_watchdog_driver = {
> .probe = qcom_wdt_probe,
> .remove = qcom_wdt_remove,
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
