From: Sylvain Lemieux <slemieux@xxxxxxxxxxx> The LPC32xx provide the capability to perform a soft or hard reset; a soft reset will no reset the external peripheral (i.e. RESOUT_N output not asserted). This changeset migrate the restart code from the "mach-lpc32xx" to the "pnx-4008" watchdog driver and add the soft reset capability. The default behavior (i.e. hard reset) remain unchanged. This patchset have a dependency on the following patch: watchdog: Add 'action' and 'data' parameters to restart handler callback http://permalink.gmane.org/gmane.linux.watchdog/3364/ Note: Patch #5 was generated with the option "--unified=2" to ensure it can be apply before or after the changes for the new LPC32xx irqchip driver: - http://permalink.gmane.org/gmane.linux.drivers.devicetree/144683 --- Changes from v4 to v5: * Rebased on the following patch: http://permalink.gmane.org/gmane.linux.watchdog/3364/ Changes from v3 to v4: * Update the patch as per the feedback received from: Arnd: http://permalink.gmane.org/gmane.linux.watchdog/3329 - Switch patch #5 and #6 order. Changes from v2 to v3: * Update the patch as per the feedback received from: Joachim: http://permalink.gmane.org/gmane.linux.watchdog/3303 - remove explicit clock enable from restart handler. - verify "register_restart_handler" return value. - add call to unregister_restart_handler". - do the restart handling directly in "pnx4008_restart_handler". * Move the change to "phy3250.c" into a separate patch and generate the new patch with the "--unified=2" option. Changes from v1 to v2: * Rename patch title; was "arm: lpc32xx: restart: add support for soft reset" * Update the patch as per the feedback received from: Joachim: http://permalink.gmane.org/gmane.linux.ports.arm.kernel/479791 - migrate restart code from "mach-lpc32xx" to "pnx-4008" driver. * Add soft reset support to "pnx-4008" driver instead of "mach-lpc32xx". * Use define available in "pnx-4008" when writting to watchdog register. * Remove restart handler from "mach-lpc32xx". * Remove restart hook from "phy3250.c". * Update driver logging during power-on. Sylvain Lemieux (6): watchdog: pnx4008: update logging during power-on watchdog: pnx4008: add restart handler watchdog: pnx4008: add support for soft reset watchdog: pnx4008: restart: support "cmd" from userspace arm: lpc32xx: phy3250 remove restart hook arm: lpc32xx: remove restart handler arch/arm/mach-lpc32xx/common.c | 15 --------------- arch/arm/mach-lpc32xx/common.h | 1 - arch/arm/mach-lpc32xx/phy3250.c | 1 - drivers/watchdog/pnx4008_wdt.c | 42 +++++++++++++++++++++++++++++++++++++++-- 4 files changed, 40 insertions(+), 19 deletions(-) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
