From: Sylvain Lemieux <slemieux@xxxxxxxxxxx>
Add support for explicit soft reset using the reboot mode.
The default reboot mode behavior is unchanged;
you can overwrite the default reboot type in the board specific file
"DT_MACHINE_START" definition using the "reboot_mode" parameter.
Signed-off-by: Sylvain Lemieux <slemieux@xxxxxxxxxxx>
---
Changes from v1 to v2:
- Rename patch title;
was "arm: lpc32xx: restart: add support for soft reset"
- Add change to "pnx-4008" driver instead of "mach-lpc32xx".
- Use define available in "pnx-4008" when writting to watchdog register.
drivers/watchdog/pnx4008_wdt.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 4b01b2b..2275fd4 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -133,9 +133,16 @@ static void pnx4008_wdt_sys_reset(enum reboot_mode mode, const char *cmd)
/* Make sure WDT clocks are enabled */
writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN, LPC32XX_CLKPWR_TIMER_CLK_CTRL);
- /* Instant assert of RESETOUT_N with pulse length 1mS */
- writel(13000, WDTIM_PULSE(wdt_base));
- writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ if (mode == REBOOT_SOFT) {
+ /* Force match output active */
+ writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
+ /* Internal reset on match output (RESOUT_N not asserted) */
+ writel(M_RES1, WDTIM_MCTRL(wdt_base));
+ } else {
+ /* Instant assert of RESETOUT_N with pulse length 1mS */
+ writel(13000, WDTIM_PULSE(wdt_base));
+ writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+ }
/* Wait for watchdog to reset system */
mdelay(1000);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
