On Tue, Nov 24, 2015 at 01:04:09PM +0000, Martyn Welch wrote: > This patchs adds documentation for the binding of the Zodiac RAVE > Switch Watchdog Processor. This is an i2c based watchdog. > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx> > --- > > v2: Addition of optional properties. > > .../devicetree/bindings/watchdog/ziirave-wdt.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > > diff --git a/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > new file mode 100644 > index 0000000..069cc2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt > @@ -0,0 +1,19 @@ > +Zodiac RAVE Watchdog Timer > + > +Required properties: > +- compatible: must be "zii,rave-wdt" > +- reg: i2c slave address of device, usually 0x38 > + > +Optional Properties: > +- timeout-sec: Watchdog timeout value in seconds. > +- reset-duration-msec: Duration of the pulse generated when the watchdog times Should be "-ms" rather than msec. > + out. Value in milliseconds. > + > +Example: > + > + watchdog@38 { > + compatible = "zii,rave-wdt"; > + reg = <0x38>; > + timeout-sec = <30>; > + reset-duration-msec = <30>; > + }; > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html