On Thu, Jul 17, 2014 at 03:18:31PM +0200, Andreas Werner wrote: > Added driver to support the 14F021P00 BMC Watchdog. > The BMC is a Board Management Controller including watchdog functionality. > > This driver use the I2C interface to the BMC using the menf21bmc MFD Core driver. > > Signed-off-by: Andreas Werner <andreas.werner@xxxxxx> Only thing I dislike is continuation line alignment, where I really prefer the 'official' style. That doesn't raise to the level of objection, though. Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Guenter > --- > drivers/watchdog/Kconfig | 7 ++ > drivers/watchdog/Makefile | 1 + > drivers/watchdog/menf21bmc_wdt.c | 206 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 214 insertions(+) > create mode 100644 drivers/watchdog/menf21bmc_wdt.c > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 76dd541..f96431d 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -95,6 +95,13 @@ config GPIO_WATCHDOG > If you say yes here you get support for watchdog device > controlled through GPIO-line. > > +config MENF21BMC_WATCHDOG > + tristate "MEN 14F021P00 BMC Watchdog" > + depends on MFD_MENF21BMC > + select WATCHDOG_CORE > + help > + Say Y here to include support for the MEN 14F021P00 BMC Watchdog. > + > config WM831X_WATCHDOG > tristate "WM831x watchdog" > depends on MFD_WM831X > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 468c320..de17014 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -178,3 +178,4 @@ obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o > obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o > obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o > obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o > +obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o > diff --git a/drivers/watchdog/menf21bmc_wdt.c b/drivers/watchdog/menf21bmc_wdt.c > new file mode 100644 > index 0000000..b46ee92 > --- /dev/null > +++ b/drivers/watchdog/menf21bmc_wdt.c > @@ -0,0 +1,206 @@ > +/* > + * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver. > + * > + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH > + * Author: Andreas Werner <andreas.werner@xxxxxx> > + * All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + */ > + > +#include <linux/kernel.h> > +#include <linux/device.h> > +#include <linux/module.h> > +#include <linux/watchdog.h> > +#include <linux/platform_device.h> > +#include <linux/i2c.h> > + > +#define DEVNAME "menf21bmc_wdt" > + > +#define BMC_CMD_WD_ON 0x11 > +#define BMC_CMD_WD_OFF 0x12 > +#define BMC_CMD_WD_TRIG 0x13 > +#define BMC_CMD_WD_TIME 0x14 > +#define BMC_CMD_WD_STATE 0x17 > +#define BMC_WD_OFF_VAL 0x69 > +#define BMC_CMD_RST_RSN 0x92 > + > +#define BMC_WD_TIMEOUT_MIN 1 /* in sec */ > +#define BMC_WD_TIMEOUT_MAX 6553 /* in sec */ > + > +static bool nowayout = WATCHDOG_NOWAYOUT; > +module_param(nowayout, bool, 0); > +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + > +struct menf21bmc_wdt { > + struct watchdog_device wdt; > + struct i2c_client *i2c_client; > +}; > + > +static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data) > +{ > + int rst_rsn; > + > + rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN); > + if (rst_rsn < 0) > + return rst_rsn; > + > + if (rst_rsn == 0x02) > + data->wdt.bootstatus |= WDIOF_CARDRESET; > + else if (rst_rsn == 0x05) > + data->wdt.bootstatus |= WDIOF_EXTERN1; > + else if (rst_rsn == 0x06) > + data->wdt.bootstatus |= WDIOF_EXTERN2; > + else if (rst_rsn == 0x0A) > + data->wdt.bootstatus |= WDIOF_POWERUNDER; > + > + return 0; > +} > + > +static int menf21bmc_wdt_start(struct watchdog_device *wdt) > +{ > + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); > + > + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON); > +} > + > +static int menf21bmc_wdt_stop(struct watchdog_device *wdt) > +{ > + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); > + > + return i2c_smbus_write_byte_data(drv_data->i2c_client, > + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); > +} > + > +static int > +menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout) > +{ > + int ret; > + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); > + > + /* > + * BMC Watchdog does have a resolution of 100ms. > + * Watchdog API defines the timeout in seconds, so we have to > + * multiply the value. > + */ > + ret = i2c_smbus_write_word_data(drv_data->i2c_client, > + BMC_CMD_WD_TIME, timeout * 10); > + if (ret < 0) > + return ret; > + > + wdt->timeout = timeout; > + > + return 0; > +} > + > +static int menf21bmc_wdt_ping(struct watchdog_device *wdt) > +{ > + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); > + > + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG); > +} > + > +static const struct watchdog_info menf21bmc_wdt_info = { > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, > + .identity = DEVNAME, > +}; > + > +static const struct watchdog_ops menf21bmc_wdt_ops = { > + .owner = THIS_MODULE, > + .start = menf21bmc_wdt_start, > + .stop = menf21bmc_wdt_stop, > + .ping = menf21bmc_wdt_ping, > + .set_timeout = menf21bmc_wdt_settimeout, > +}; > + > +static int menf21bmc_wdt_probe(struct platform_device *pdev) > +{ > + int ret, bmc_timeout; > + struct menf21bmc_wdt *drv_data; > + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); > + > + drv_data = devm_kzalloc(&pdev->dev, > + sizeof(struct menf21bmc_wdt), GFP_KERNEL); > + if (!drv_data) > + return -ENOMEM; > + > + drv_data->wdt.ops = &menf21bmc_wdt_ops; > + drv_data->wdt.info = &menf21bmc_wdt_info; > + drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN; > + drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX; > + drv_data->i2c_client = i2c_client; > + > + /* > + * Get the current wdt timeout value from the BMC because > + * the BMC will save the value set before if the system restarts. > + */ > + bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client, > + BMC_CMD_WD_TIME); > + if (bmc_timeout < 0) { > + dev_err(&pdev->dev, "failed to get current WDT timeout\n"); > + return bmc_timeout; > + } > + > + watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev); > + watchdog_set_nowayout(&drv_data->wdt, nowayout); > + watchdog_set_drvdata(&drv_data->wdt, drv_data); > + platform_set_drvdata(pdev, drv_data); > + > + ret = menf21bmc_wdt_set_bootstatus(drv_data); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n"); > + return ret; > + } > + > + ret = watchdog_register_device(&drv_data->wdt); > + if (ret) { > + dev_err(&pdev->dev, "failed to register Watchdog device\n"); > + return ret; > + } > + > + dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n"); > + > + return 0; > +} > + > +static int menf21bmc_wdt_remove(struct platform_device *pdev) > +{ > + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); > + > + dev_warn(&pdev->dev, > + "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n"); > + > + watchdog_unregister_device(&drv_data->wdt); > + > + return 0; > +} > + > +static void menf21bmc_wdt_shutdown(struct platform_device *pdev) > +{ > + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); > + > + i2c_smbus_write_word_data(drv_data->i2c_client, > + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); > +} > + > +static struct platform_driver menf21bmc_wdt = { > + .driver = { > + .owner = THIS_MODULE, > + .name = DEVNAME, > + }, > + .probe = menf21bmc_wdt_probe, > + .remove = menf21bmc_wdt_remove, > + .shutdown = menf21bmc_wdt_shutdown, > +}; > + > +module_platform_driver(menf21bmc_wdt); > + > +MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver"); > +MODULE_AUTHOR("Andreas Werner <andreas.werner@xxxxxx>"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("platform:menf21bmc_wdt"); > -- > 2.0.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html