Hi Linus,
Please pull from 'master' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
or if master.kernel.org hasn't synced up yet:
master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
This will update the following files:
drivers/watchdog/cpwd.c | 2 +-
drivers/watchdog/hpwdt.c | 4 ++--
drivers/watchdog/sch311x_wdt.c | 2 +-
drivers/watchdog/w83697ug_wdt.c | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
with these Changes:
Author: Axel Lin <axel.lin@xxxxxxxxx>
Date: Wed Mar 2 11:49:44 2011 +0800
watchdog: hpwdt: eliminate section mismatch warning
hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling,
thus remove the __devexit annotation of hpwdt_exit_nmi_decoding().
This patch fixes below warning:
WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding()
The function __devinit hpwdt_init_one() references
a function __devexit hpwdt_exit_nmi_decoding().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
hpwdt_exit_nmi_decoding() so it may be used outside an exit section.
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@xxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Wim Van Sebroeck <wim@xxxxxxxxx>
Date: Mon Feb 21 19:28:58 2011 +0000
watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
outb_p(c || 0x01, WDT_EFDR); -> || should be |
Reported-By: Toralf Förster <toralf.foerster@xxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Dan Carpenter <error27@xxxxxxxxx>
Date: Wed Feb 23 23:26:01 2011 +0300
watchdog: sch311x_wdt: fix printk condition
"==" has higher precedence than "&". Since
if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always
false the message is never printed.
Signed-off-by: Dan Carpenter <error27@xxxxxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Wim Van Sebroeck <wim@xxxxxxxxx>
Date: Mon Feb 21 19:09:40 2011 +0000
watchdog: sch311x_wdt: Fix LDN active check
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be &
Reported-By: Toralf Förster <toralf.foerster@xxxxxx>
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
Author: Wim Van Sebroeck <wim@xxxxxxxxx>
Date: Mon Feb 21 10:52:43 2011 +0000
watchdog: cpwd: Fix buffer-overflow
cppcheck-1.47 reports:
[drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs
The source code is
for (i = 0; i < 4; i++) {
misc_deregister(&p->devs[i].misc);
where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3.
So the 4 should be a 3 or WD_NUMDEVS.
Reported-By: David Binderman
Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx>
The Changes can also be looked at on:
http://www.kernel.org/git/?p=linux/kernel/git/wim/linux-2.6-watchdog.git;a=summary
For completeness, I added the overal diff below.
Greetings,
Wim.
================================================================================
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index eca855a..3de4ba0 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -646,7 +646,7 @@ static int __devexit cpwd_remove(struct platform_device *op)
struct cpwd *p = dev_get_drvdata(&op->dev);
int i;
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < WD_NUMDEVS; i++) {
misc_deregister(&p->devs[i].misc);
if (!p->enabled) {
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 24b966d..204a560 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -710,7 +710,7 @@ static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
return 0;
}
-static void __devexit hpwdt_exit_nmi_decoding(void)
+static void hpwdt_exit_nmi_decoding(void)
{
unregister_die_notifier(&die_notifier);
if (cru_rom_addr)
@@ -726,7 +726,7 @@ static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
return 0;
}
-static void __devexit hpwdt_exit_nmi_decoding(void)
+static void hpwdt_exit_nmi_decoding(void)
{
}
#endif /* CONFIG_HPWDT_NMI_DECODING */
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index 0461858..b61ab1c 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -508,7 +508,7 @@ static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
/* Check if Logical Device Register is currently active */
- if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0)
+ if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n");
/* Get the base address of the runtime registers */
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index a6c12de..df2a64d 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -109,7 +109,7 @@ static int w83697ug_select_wd_register(void)
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
outb_p(0x30, WDT_EFER); /* select CR30 */
c = inb_p(WDT_EFDR);
- outb_p(c || 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+ outb_p(c | 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
