On Wed, Nov 20, 2024 at 12:34:51PM +0530, Shijith Thotton wrote:
> From: Satha Rao <skoteshwar@xxxxxxxxxxx>
>
> The first interrupt of the device is used to notify the host about
> device configuration changes, such as link status updates. The ISR
> configuration area is updated to indicate a config change event when
> triggered.
>
> Signed-off-by: Satha Rao <skoteshwar@xxxxxxxxxxx>
> Signed-off-by: Shijith Thotton <sthotton@xxxxxxxxxxx>
> ---
> drivers/vdpa/octeon_ep/octep_vdpa_main.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/vdpa/octeon_ep/octep_vdpa_main.c b/drivers/vdpa/octeon_ep/octep_vdpa_main.c
> index 482c178a5221..6db951c6cb92 100644
> --- a/drivers/vdpa/octeon_ep/octep_vdpa_main.c
> +++ b/drivers/vdpa/octeon_ep/octep_vdpa_main.c
> @@ -74,6 +74,14 @@ static irqreturn_t octep_vdpa_intr_handler(int irq, void *data)
> }
> }
>
> + /* Check for config interrupt. Config uses the first interrupt */
> + if (unlikely(ring_start == 0 && ioread8(oct_hw->isr))) {
> + iowrite8(0, oct_hw->isr);
> +
> + if (likely(oct_hw->config_cb.callback))
Adding unlikely() and likey() hurts readability. It adds noise. You should do
it if it makes a difference on a benchmark but that seems unlikely here.
regards,
dan carpenter
> + oct_hw->config_cb.callback(oct_hw->config_cb.private);
> + }
> +
> return IRQ_HANDLED;
> }
>
> --
> 2.25.1
>
