Re: [PATCH] virtio_net: set default mtu to 1500 when 'Device maximum MTU' bigger than 1500

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 06, 2023 at 04:56:35PM +0800, Hao Chen wrote:
> 
> 
> 在 2023/5/6 10:50, Xuan Zhuo 写道:
> > On Sat,  6 May 2023 10:15:29 +0800, Hao Chen <chenh@xxxxxxxxxx> wrote:
> > > When VIRTIO_NET_F_MTU(3) Device maximum MTU reporting is supported.
> > > If offered by the device, device advises driver about the value of its
> > > maximum MTU. If negotiated, the driver uses mtu as the maximum
> > > MTU value. But there the driver also uses it as default mtu,
> > > some devices may have a maximum MTU greater than 1500, this may
> > > cause some large packages to be discarded,
> > 
> > You mean tx packet?
> Yes.
> > 
> > If yes, I do not think this is the problem of driver.
> > 
> > Maybe you should give more details about the discard.
> > 
> In the current code, if the maximum MTU supported by the virtio net hardware
> is 9000, the default MTU of the virtio net driver will also be set to 9000.
> When sending packets through "ping -s 5000", if the peer router does not
> support negotiating a path MTU through ICMP packets, the packets will be
> discarded. If the peer router supports negotiating path mtu through ICMP
> packets, the host side will perform packet sharding processing based on the
> negotiated path mtu, which is generally within 1500.
> This is not a bugfix patch, I think setting the default mtu to within 1500
> would be more suitable here.Thanks.

I don't think VIRTIO_NET_F_MTU is appropriate for support for jumbo packets.
The spec says:
	The device MUST forward transmitted packets of up to mtu (plus low level ethernet header length) size with
	gso_type NONE or ECN, and do so without fragmentation, after VIRTIO_NET_F_MTU has been success-
	fully negotiated.
VIRTIO_NET_F_MTU has been designed for all kind of tunneling devices,
and this is why we set mtu to max by default.

For things like jumbo frames where MTU might or might not be available,
a new feature would be more appropriate.

> > > so I changed the MTU to a more
> > > general 1500 when 'Device maximum MTU' bigger than 1500.
> > > 
> > > Signed-off-by: Hao Chen <chenh@xxxxxxxxxx>
> > > ---
> > >   drivers/net/virtio_net.c | 5 ++++-
> > >   1 file changed, 4 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > index 8d8038538fc4..e71c7d1b5f29 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -4040,7 +4040,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> > >   			goto free;
> > >   		}
> > > 
> > > -		dev->mtu = mtu;
> > > +		if (mtu > 1500)
> > 
> > s/1500/ETH_DATA_LEN/
> > 
> > Thanks.
> > 
> > > +			dev->mtu = 1500;
> > > +		else
> > > +			dev->mtu = mtu;
> > >   		dev->max_mtu = mtu;
> > >   	}
> > > 
> > > --
> > > 2.27.0
> > > 

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux