On Tue, Jun 15, 2021 at 10:13:30PM +0800, Xie Yongji wrote:
> diff --git a/include/uapi/linux/vduse.h b/include/uapi/linux/vduse.h
> new file mode 100644
> index 000000000000..f21b2e51b5c8
> --- /dev/null
> +++ b/include/uapi/linux/vduse.h
> @@ -0,0 +1,143 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +#ifndef _UAPI_VDUSE_H_
> +#define _UAPI_VDUSE_H_
> +
> +#include <linux/types.h>
> +
> +#define VDUSE_API_VERSION 0
> +
> +#define VDUSE_NAME_MAX 256
> +
> +/* the control messages definition for read/write */
> +
> +enum vduse_req_type {
> + /* Get the state for virtqueue from userspace */
> + VDUSE_GET_VQ_STATE,
> + /* Notify userspace to start the dataplane, no reply */
> + VDUSE_START_DATAPLANE,
> + /* Notify userspace to stop the dataplane, no reply */
> + VDUSE_STOP_DATAPLANE,
> + /* Notify userspace to update the memory mapping in device IOTLB */
> + VDUSE_UPDATE_IOTLB,
> +};
> +
> +struct vduse_vq_state {
> + __u32 index; /* virtqueue index */
> + __u32 avail_idx; /* virtqueue state (last_avail_idx) */
> +};
> +
> +struct vduse_iova_range {
> + __u64 start; /* start of the IOVA range */
> + __u64 last; /* end of the IOVA range */
Please clarify whether this describes a closed range [start, last] or an
open range [start, last).
> +};
> +
> +struct vduse_dev_request {
> + __u32 type; /* request type */
> + __u32 request_id; /* request id */
> +#define VDUSE_REQ_FLAGS_NO_REPLY (1 << 0) /* No need to reply */
> + __u32 flags; /* request flags */
> + __u32 reserved; /* for future use */
> + union {
> + struct vduse_vq_state vq_state; /* virtqueue state */
> + struct vduse_iova_range iova; /* iova range for updating */
> + __u32 padding[16]; /* padding */
> + };
> +};
> +
> +struct vduse_dev_response {
> + __u32 request_id; /* corresponding request id */
> +#define VDUSE_REQ_RESULT_OK 0x00
> +#define VDUSE_REQ_RESULT_FAILED 0x01
> + __u32 result; /* the result of request */
> + __u32 reserved[2]; /* for future use */
> + union {
> + struct vduse_vq_state vq_state; /* virtqueue state */
> + __u32 padding[16]; /* padding */
> + };
> +};
> +
> +/* ioctls */
> +
> +struct vduse_dev_config {
> + char name[VDUSE_NAME_MAX]; /* vduse device name */
> + __u32 vendor_id; /* virtio vendor id */
> + __u32 device_id; /* virtio device id */
> + __u64 features; /* device features */
> + __u64 bounce_size; /* bounce buffer size for iommu */
> + __u16 vq_size_max; /* the max size of virtqueue */
The VIRTIO specification allows per-virtqueue sizes. A device can have
two virtqueues, where the first one allows up to 1024 descriptors and
the second one allows only 128 descriptors, for example.
This constant seems to impose the constraint that all virtqueues have
the same maximum size. Is this really necessary?
> + __u16 padding; /* padding */
> + __u32 vq_num; /* the number of virtqueues */
> + __u32 vq_align; /* the allocation alignment of virtqueue's metadata */
I'm not sure what this is?
> + __u32 config_size; /* the size of the configuration space */
> + __u32 reserved[15]; /* for future use */
> + __u8 config[0]; /* the buffer of the configuration space */
> +};
> +
> +struct vduse_iotlb_entry {
> + __u64 offset; /* the mmap offset on fd */
> + __u64 start; /* start of the IOVA range */
> + __u64 last; /* last of the IOVA range */
Same here, please specify whether this is an open range or a closed
range.
> +#define VDUSE_ACCESS_RO 0x1
> +#define VDUSE_ACCESS_WO 0x2
> +#define VDUSE_ACCESS_RW 0x3
> + __u8 perm; /* access permission of this range */
> +};
> +
> +struct vduse_config_update {
> + __u32 offset; /* offset from the beginning of configuration space */
> + __u32 length; /* the length to write to configuration space */
> + __u8 buffer[0]; /* buffer used to write from */
> +};
> +
> +struct vduse_vq_info {
> + __u32 index; /* virtqueue index */
> + __u32 avail_idx; /* virtqueue state (last_avail_idx) */
> + __u64 desc_addr; /* address of desc area */
> + __u64 driver_addr; /* address of driver area */
> + __u64 device_addr; /* address of device area */
> + __u32 num; /* the size of virtqueue */
> + __u8 ready; /* ready status of virtqueue */
> +};
> +
> +struct vduse_vq_eventfd {
> + __u32 index; /* virtqueue index */
> +#define VDUSE_EVENTFD_DEASSIGN -1
> + int fd; /* eventfd, -1 means de-assigning the eventfd */
> +};
> +
> +#define VDUSE_BASE 0x81
> +
> +/* Get the version of VDUSE API. This is used for future extension */
> +#define VDUSE_GET_API_VERSION _IOR(VDUSE_BASE, 0x00, __u64)
> +
> +/* Set the version of VDUSE API. */
> +#define VDUSE_SET_API_VERSION _IOW(VDUSE_BASE, 0x01, __u64)
> +
> +/* Create a vduse device which is represented by a char device (/dev/vduse/<name>) */
> +#define VDUSE_CREATE_DEV _IOW(VDUSE_BASE, 0x02, struct vduse_dev_config)
> +
> +/* Destroy a vduse device. Make sure there are no references to the char device */
> +#define VDUSE_DESTROY_DEV _IOW(VDUSE_BASE, 0x03, char[VDUSE_NAME_MAX])
> +
> +/*
> + * Get a file descriptor for the first overlapped iova region,
> + * -EINVAL means the iova region doesn't exist.
> + */
> +#define VDUSE_IOTLB_GET_FD _IOWR(VDUSE_BASE, 0x04, struct vduse_iotlb_entry)
> +
> +/* Get the negotiated features */
> +#define VDUSE_DEV_GET_FEATURES _IOR(VDUSE_BASE, 0x05, __u64)
> +
> +/* Update the configuration space */
> +#define VDUSE_DEV_UPDATE_CONFIG _IOW(VDUSE_BASE, 0x06, struct vduse_config_update)
> +
> +/* Get the specified virtqueue's information */
> +#define VDUSE_VQ_GET_INFO _IOWR(VDUSE_BASE, 0x07, struct vduse_vq_info)
> +
> +/* Setup an eventfd to receive kick for virtqueue */
> +#define VDUSE_VQ_SETUP_KICKFD _IOW(VDUSE_BASE, 0x08, struct vduse_vq_eventfd)
> +
> +/* Inject an interrupt for specific virtqueue */
> +#define VDUSE_VQ_INJECT_IRQ _IOW(VDUSE_BASE, 0x09, __u32)
There is not enough documentation to use this header file. For example,
which ioctls are used with /dev/vduse and which are used with
/dev/vduse/<name>?
Please document that ioctl API fully. It will not only help userspace
developers but also define what is part of the interface and what is an
implementation detail that can change in the future.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
