On Tue, Dec 05, 2017 at 01:52:26PM -0800, Jesse Brandeburg wrote: > On Tue, 5 Dec 2017 21:20:07 +0200 > "Michael S. Tsirkin" <mst@xxxxxxxxxx> wrote: > > > On Tue, Dec 05, 2017 at 11:59:17AM +0200, achiad shochat wrote: > > > Then we'll have a single solution for both netvsc and virtio (and any > > > other PV device). > > > And we could handle the VF DMA dirt issue agnostically. > > > > For the record, I won't block patches adding this kist to virtio > > on the basis that they must be generic. It's not a lot > > of code, implementation can come first, prettify later. > > Thanks, based on this discussion we're going to work on improving > virtio-net first, but some of Achiad's points are good. I don't believe > it should block the virtio work however. > > In particular I'm really interested in figuring out how we can get to > the point that virtio is able to make or implement some smart decisions > about which NIC to pick for traffic delivery (it's own paravirt path or > the passthorugh device path), if Achiad wants to develop the idea into > some code, I'd be interested to review it. > > > But we do need to have a discussion about how devices are paired. > > I am not sure using just MAC works. E.g. some passthrough > > devices don't give host ability to set the MAC. > > Are these worth worrying about? > > I personally don't think that will be much of a problem, if a > certain device has that issue, can't we just have the virtio-net device > pick up the MAC address of the passthrough device? Then what do you do after you have migrated to another box? The PT device there likely has a different MAC. > As long as they match > things should work OK. It at least is an initial way to do the > configuration that has at least some traction as workable, as proved by > the Microsoft design. Yes - that design just implements what people have been doing for years using bond so of course it's workable. > FWIW, the Intel SR-IOV devices all accept a hypervisor/host provided > MAC address. For VFs you often can program the MAC through the PF, but you typically can't do this for PFs. Or as another example consider nested virt with a VF passed through. PF isn't there within L1 guest so can't be used to program the mac of the VF. Still, we can always start small and require same mac, add other ways to address issues later as we come up with them. -- MST _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization
