Matias Zabaljauregui wrote:
> Hi,
>
> For some days I have been looking for the bug that causes an easily reproducible oops in the guest
> when I apply my PAE support _draft_ patch (appended at the end of this mail) to lguest.
>
Good, lguest has needed PAE support for a while. Do you require that
the host and guest have the same PAE status, or can you run a non-PAE
guest on a PAE host, or vice versa?
> This is the oops:
>
> Setting kernel variables...done.
> Will now mount local filesystems:.
> Will now activate swapfile swap:done.
> Cleaning /tmp...
> [ 84.749676] BUG: unable to handle kernel NULL pointer dereference at 00000005
> [ 84.749676] IP: [<c0101f6e>] __switch_to+0xd/0x12d
> [ 84.749676] *pdpt = 000000001fa12001 *pde = 0000000000000000
> [ 84.749676] Oops: 0000 [#1] PREEMPT
> [ 84.749676] last sysfs file: /sys/kernel/uevent_seqnum
> [ 84.749676] Modules linked in:
> [ 84.749676]
> [ 84.749676] Pid: 1066, comm: find Not tainted (2.6.30-rc2-00167-gcd97824-dirty #1)
> [ 84.749676] EIP: 0061:[<c0101f6e>] EFLAGS: 00000092 CPU: 0
> [ 84.749676] EIP is at __switch_to+0xd/0x12d
> [ 84.749676] EAX: 00000001 EBX: dfa371b0 ECX: df8b0430 EDX: dfa371b0
> [ 84.749676] ESI: 00000001 EDI: df887200 EBP: df865ec4 ESP: df865eac
> [ 84.749676] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0069
> [ 84.749676] Process find (pid: 1066, ti=df864000 task=df8b0430 task.ti=dfa0e000)
> [ 84.749676] Stack:
> [ 84.749676] 00000000 00000001 df8b0464 dfa371b0 df8b0430 df887200 df865ee0 c0101b7d
> [ 84.749676] 00000004 c040f544 dfa371b0 dfa13bc0 dfa13540 dfa0ff58 c03211b7 df865f28
> [ 84.749676] 00000286 00000000 00393bc7 df865f20 dfa371b0 dfa37340 dfa5d8a0 dfa371b0
> [ 84.749676] Call Trace:
> [ 84.749676] [<c0101b7d>] ? lazy_hcall1+0x32/0xac
> [ 84.749676] [<c03211b7>] ? __schedule+0x2c2/0x31f
> [ 84.749676] [<c0321226>] ? schedule+0x12/0x24
> [ 84.749676] [<c01225ff>] ? do_wait+0x1ec/0x363
> [ 84.749676] [<c011c4a7>] ? default_wake_function+0x0/0xd
> [ 84.749676] [<c020fabe>] ? copy_to_user+0x2a/0x34
> [ 84.749676] [<c01227e5>] ? sys_wait4+0x6f/0x85
> [ 84.749676] [<c012280e>] ? sys_waitpid+0x13/0x15
> [ 84.749676] [<c01037c5>] ? syscall_call+0x7/0xb
> [ 84.749676] Code: 00 01 80 00 6a 00 6a 00 6a 00 8d 4d b0 31 d2 89 f0 e8 d3 d7 01 00 8d 65 f4 5b 5e 5f c9 c3 55 89 e5 57 56 53 83 ec 0c 89 c6 89 d3 <8b> 40 04 8b 40 0c a8 01 74 56 a8 10 8b be 60 02 00 00 74 1b 83
> [ 84.749676] EIP: [<c0101f6e>] __switch_to+0xd/0x12d SS:ESP 0069:df865eac
> [ 84.749676] CR2: 0000000000000005
> [ 84.749676] ---[ end trace 54cfaaa2a7bf67ca ]---
> [ 84.749676] Fixing recursive fault but reboot is needed!
>
>
>
>
> and looking for the NULL dereference, it seems to be in __unlazy_fpu
>
>
> # gdb -q vmlinux
>
> (gdb) list *0xc0101f6e
> 0xc0101f6e is in __switch_to (/usr/src/linux-2.6/arch/x86/include/asm/i387.h:273).
> 268 extern int save_i387_xstate(void __user *buf);
> 269 extern int restore_i387_xstate(void __user *buf);
> 270
> 271 static inline void __unlazy_fpu(struct task_struct *tsk)
> 272 {
> 273 if (task_thread_info(tsk)->status & TS_USEDFPU) {
> 274 __save_init_fpu(tsk);
> 275 stts();
> 276 } else
> 277 tsk->fpu_counter = 0;
>
>
>
>
> This oops disappears when I use no387 and nofxsr guest kernel parameters in lguest command invocation
>
>
>
>
> Now, this is only happening with my PAE patch applied, so I assume that my code is broken.
> But these seems to be the same symptoms discussed in this thread:
>
> http://lkml.indiana.edu/hypermail/linux/kernel/0806.2/0787.html
>
Its a little different. In this case its computing 0x1 (in %eax) as the
task struct, and falling over when it accesses 4(%eax). I wonder if
you've got some mapping wrong?
(Other comments inline below).
J
> So I thought that maybe you can help me with some hints.
>
> I really appreciate your help,
> Matias
>
>
>
> Here is my patch:
>
>
>
> diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
> index 1caf576..ffbf1ac 100644
> --- a/arch/x86/include/asm/lguest.h
> +++ b/arch/x86/include/asm/lguest.h
> @@ -17,8 +17,13 @@
> /* Pages for switcher itself, then two pages per cpu */
> #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
>
> +#ifdef CONFIG_X86_PAE
> +/* We map at -2M for ease of mapping into the guest (one PTE page). */
> +#define SWITCHER_ADDR 0xFFE00000
> +#else
> /* We map at -4M for ease of mapping into the guest (one PTE page). */
> #define SWITCHER_ADDR 0xFFC00000
> +#endif
>
> /* Found in switcher.S */
> extern unsigned long default_idt_entries[];
> diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
> index 0f4ee71..3860153 100644
> --- a/arch/x86/include/asm/lguest_hcall.h
> +++ b/arch/x86/include/asm/lguest_hcall.h
> @@ -17,6 +17,7 @@
> #define LHCALL_SET_PMD 15
> #define LHCALL_LOAD_TLS 16
> #define LHCALL_NOTIFY 17
> +#define LHCALL_SET_PUD 18
>
PGD is more accurate than PUD (here, and the rest of the patch). The
pud level of the pagetable is the 4th level used by 64-bit; PAE just has
PGD, PMD and PTE levels. Due to pagetable level folding, the PGD is
sometimes referred to as the PUD when looking "up" the pagetable tree
(ie, the PUD is logically the next level up from the PMD), but its still
just an alias for the PGD. Since the hypervisor interface shouldn't
care about how the guest OS manages its pagetables, it should use a
consistent naming for the levels as they "really" are. Lguest
traditionally uses the same names that Linux does, so PGD is appropriate.
> #define LGUEST_TRAP_ENTRY 0x1F
>
> diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
> index 8dab8f7..3871804 100644
> --- a/arch/x86/lguest/Kconfig
> +++ b/arch/x86/lguest/Kconfig
> @@ -2,7 +2,6 @@ config LGUEST_GUEST
> bool "Lguest guest support"
> select PARAVIRT
> depends on X86_32
> - depends on !X86_PAE
> select VIRTIO
> select VIRTIO_RING
> select VIRTIO_CONSOLE
> diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
> index e94a11e..ce7b010 100644
> --- a/arch/x86/lguest/boot.c
> +++ b/arch/x86/lguest/boot.c
> @@ -359,8 +359,12 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
> case 1: /* Basic feature request. */
> /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
> *cx &= 0x00002201;
> - /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
> + /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
> +#ifdef CONFIG_X86_PAE
> + *dx &= 0x07808151;
> +#else
> *dx &= 0x07808111;
> +#endif
> /* The Host can do a nice optimization if it knows that the
> * kernel mappings (addresses above 0xC0000000 or whatever
> * PAGE_OFFSET is set to) haven't changed. But Linux calls
> @@ -518,18 +522,30 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
> static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
> pte_t *ptep, pte_t pteval)
> {
> - *ptep = pteval;
> + native_set_pte(ptep, pteval);
> lguest_pte_update(mm, addr, ptep);
> }
>
> +#ifdef CONFIG_X86_PAE
> /* The Guest calls this to set a top-level entry. Again, we set the entry then
> * tell the Host which top-level page we changed, and the index of the entry we
> * changed. */
> +static void lguest_set_pud(pud_t *pudp, pud_t pudval)
> +{
> + native_set_pud (pudp, pudval);
> +
> + /* 32 bytes aligned pdpt address. */
> + lazy_hcall2(LHCALL_SET_PUD, __pa(pudp) & 0xFFFFFFE0,
> + (__pa(pudp) & 0x1F) / sizeof(pud_t));
> +}
> +#endif
> +
> +/* The Guest calls this to set a PMD entry, when PAE is active */
> static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
> {
> - *pmdp = pmdval;
> + native_set_pmd (pmdp, pmdval);
> lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
> - (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
> + (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
> }
>
> /* There are a couple of legacy places where the kernel sets a PTE, but we
> @@ -543,11 +559,31 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
> * which brings boot back to 0.25 seconds. */
> static void lguest_set_pte(pte_t *ptep, pte_t pteval)
> {
> - *ptep = pteval;
> + native_set_pte(ptep, pteval);
> + if (cr3_changed)
> + lazy_hcall1(LHCALL_FLUSH_TLB, 1);
> +}
> +
> +#ifdef CONFIG_X86_PAE
> +static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
> +{
> + native_set_pte_atomic(ptep, pte);
> if (cr3_changed)
> lazy_hcall1(LHCALL_FLUSH_TLB, 1);
> }
>
> +void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
> +{
> + native_pte_clear(mm, addr, ptep);
> + lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
> +}
> +
> +void lguest_pmd_clear(pmd_t *pmdp)
> +{
> + lguest_set_pmd(pmdp, __pmd(0));
> +}
> +#endif
> +
> /* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
> * native page table operations. On native hardware you can set a new page
> * table entry whenever you want, but if you want to remove one you have to do
> @@ -1017,6 +1053,7 @@ __init void lguest_init(void)
> pv_info.name = "lguest";
> pv_info.paravirt_enabled = 1;
> pv_info.kernel_rpl = 1;
> + pv_info.shared_kernel_pmd = 1;
>
> /* We set up all the lguest overrides for sensitive operations. These
> * are detailed with the operations themselves. */
> @@ -1062,6 +1099,13 @@ __init void lguest_init(void)
> pv_mmu_ops.set_pte = lguest_set_pte;
> pv_mmu_ops.set_pte_at = lguest_set_pte_at;
> pv_mmu_ops.set_pmd = lguest_set_pmd;
> +
> +#ifdef CONFIG_X86_PAE
> + pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
> + pv_mmu_ops.pte_clear = lguest_pte_clear;
> + pv_mmu_ops.pmd_clear = lguest_pmd_clear;
> + pv_mmu_ops.set_pud = lguest_set_pud;
> +#endif
> pv_mmu_ops.read_cr2 = lguest_read_cr2;
> pv_mmu_ops.read_cr3 = lguest_read_cr3;
> pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
> diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
> index a3d3cba..8f63845 100644
> --- a/drivers/lguest/Kconfig
> +++ b/drivers/lguest/Kconfig
> @@ -1,6 +1,6 @@
> config LGUEST
> tristate "Linux hypervisor example code"
> - depends on X86_32 && EXPERIMENTAL && !X86_PAE && FUTEX
> + depends on X86_32 && EXPERIMENTAL && FUTEX
> select HVC_DRIVER
> ---help---
> This is a very simple module which allows you to run
> diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
> index 54d66f0..c5d6678 100644
> --- a/drivers/lguest/hypercalls.c
> +++ b/drivers/lguest/hypercalls.c
> @@ -78,6 +78,11 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
> case LHCALL_SET_PMD:
> guest_set_pmd(cpu->lg, args->arg1, args->arg2);
> break;
> +#ifdef CONFIG_X86_PAE
> + case LHCALL_SET_PUD:
> + guest_set_pud(cpu->lg, args->arg1, args->arg2);
> + break;
> +#endif
> case LHCALL_SET_CLOCKEVENT:
> guest_set_clockevent(cpu, args->arg1);
> break;
> diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
> index ac8a4a3..514a6c0 100644
> --- a/drivers/lguest/lg.h
> +++ b/drivers/lguest/lg.h
> @@ -18,7 +18,7 @@ int init_pagetables(struct page **switcher_page, unsigned int pages);
>
> struct pgdir
> {
> - unsigned long gpgdir;
> + pgd_t *gpgdir;
> pgd_t *pgdir;
> };
>
> @@ -137,6 +137,8 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
> * in the kernel. */
> #define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK)
> #define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT)
> +#define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK)
> +#define pmd_pfn(x) (pmd_val(x) >> PAGE_SHIFT)
>
These look generally useful and should be in asm/pgtable.h (as static
inlines).
> /* interrupts_and_traps.c: */
> void maybe_do_interrupt(struct lg_cpu *cpu);
> @@ -168,6 +170,9 @@ int init_guest_pagetable(struct lguest *lg);
> void free_guest_pagetable(struct lguest *lg);
> void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable);
> void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i);
> +#ifdef CONFIG_X86_PAE
> +void guest_set_pud(struct lguest *lg, unsigned long gpgdir, u32 i);
> +#endif
> void guest_pagetable_clear_all(struct lg_cpu *cpu);
> void guest_pagetable_flush_user(struct lg_cpu *cpu);
> void guest_set_pte(struct lg_cpu *cpu, unsigned long gpgdir,
> diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
> index a059cf9..77014d8 100644
> --- a/drivers/lguest/page_tables.c
> +++ b/drivers/lguest/page_tables.c
> @@ -47,12 +47,20 @@
> * (vii) Setting up the page tables initially.
> :*/
>
> +void guest_pagetable_clear_all(struct lg_cpu *cpu);
>
> /* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is
> * conveniently placed at the top 4MB, so it uses a separate, complete PTE
> * page. */
> #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
>
> +/* For PAE we need the PMD index as well. We can use the last 2MB, so we
> + * will need the last pmd entry of the last pmd page. */
> +#ifdef CONFIG_X86_PAE
> +
> +#define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1)
> +#endif
> +
> /* We actually need a separate PTE page for each CPU. Remember that after the
> * Switcher code itself comes two pages for each CPU, and we don't want this
> * CPU's guest to see the pages of any other CPU. */
> @@ -73,39 +81,90 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
> {
> unsigned int index = pgd_index(vaddr);
>
> +#ifndef CONFIG_X86_PAE
> /* We kill any Guest trying to touch the Switcher addresses. */
> if (index >= SWITCHER_PGD_INDEX) {
> kill_guest(cpu, "attempt to access switcher pages");
> index = 0;
> }
> +#endif
> /* Return a pointer index'th pgd entry for the i'th page table. */
> return &cpu->lg->pgdirs[i].pgdir[index];
> }
>
> +#ifdef CONFIG_X86_PAE
> +/* This routine then takes the PGD entry given above, which contains the
> + * address of the PMD page. It then returns a pointer to the PMD entry for the
> + * given address. */
> +static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
> +{
> + unsigned int index = pmd_index(vaddr);
> + pmd_t *page;
> +
> + /* We kill any Guest trying to touch the Switcher addresses. */
> + if (pgd_index(vaddr) == SWITCHER_PGD_INDEX &&
> + index >= SWITCHER_PMD_INDEX) {
> + kill_guest(cpu, "attempt to access switcher pages");
> + index = 0;
> + }
> +
> + /* You should never call this if the PGD entry wasn't valid */
> + BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
> +
> + page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
> + return &page[index];
> +}
> +#endif
> +
> /* This routine then takes the page directory entry returned above, which
> * contains the address of the page table entry (PTE) page. It then returns a
> * pointer to the PTE entry for the given address. */
> -static pte_t *spte_addr(pgd_t spgd, unsigned long vaddr)
> +static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
> {
> +#ifdef CONFIG_X86_PAE
> + pmd_t *pmd = spmd_addr(cpu, spgd, vaddr);
> + pte_t *page = __va(pmd_pfn(*pmd) << PAGE_SHIFT);
> +
> + /* You should never call this if the PMD entry wasn't valid */
> + BUG_ON(!(pmd_flags(*pmd) & _PAGE_PRESENT));
> +#else
> pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
> +
> /* You should never call this if the PGD entry wasn't valid */
> BUG_ON(!(pgd_flags(spgd) & _PAGE_PRESENT));
> - return &page[(vaddr >> PAGE_SHIFT) % PTRS_PER_PTE];
> +#endif
> + return &page[pte_index(vaddr)];
> }
>
> /* These two functions just like the above two, except they access the Guest
> * page tables. Hence they return a Guest address. */
> -static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
> +static pgd_t *gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
>
Can guest addresses be directly accessed by the host? If not, returning
a plain pgd_t would seem to have the potential for strife. And why
"pgd_t *" here, but "unsigned long" for the pmd/pte versions of the
function?
> {
> unsigned int index = vaddr >> (PGDIR_SHIFT);
> - return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index * sizeof(pgd_t);
> + return cpu->lg->pgdirs[cpu->cpu_pgd].gpgdir + index;
> +}
> +
> +#ifdef CONFIG_X86_PAE
> +static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
> +{
> + unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
> + BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
> + return gpage + pmd_index(vaddr) * sizeof(pmd_t);
> }
> +#endif
>
> -static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
> +static unsigned long gpte_addr(struct lg_cpu *cpu,
> + pgd_t gpgd, unsigned long vaddr)
> {
> +#ifdef CONFIG_X86_PAE
> + pmd_t gpmd = lgread(cpu,
> + (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
> + unsigned long gpage = pmd_pfn(gpmd) << PAGE_SHIFT;
> +#else
> unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
> BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
> - return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
> +#endif
> + return gpage + pte_index(vaddr) * sizeof(pte_t);
> }
> /*:*/
>
> @@ -184,11 +243,24 @@ static void check_gpte(struct lg_cpu *cpu, pte_t gpte)
>
> static void check_gpgd(struct lg_cpu *cpu, pgd_t gpgd)
> {
> +#ifdef CONFIG_X86_PAE
> + if ((pgd_flags(gpgd) & ~_PAGE_PRESENT) ||
> +#else
> if ((pgd_flags(gpgd) & ~_PAGE_TABLE) ||
> +#endif
> (pgd_pfn(gpgd) >= cpu->lg->pfn_limit))
> kill_guest(cpu, "bad page directory entry");
> }
>
> +#ifdef CONFIG_X86_PAE
> +static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
> +{
> + if ((pmd_flags(gpmd) & ~_PAGE_TABLE) ||
> + (pmd_pfn(gpmd) >= cpu->lg->pfn_limit))
> + kill_guest(cpu, "bad page middle directory entry");
> +}
> +#endif
> +
> /*H:330
> * (i) Looking up a page table entry when the Guest faults.
> *
> @@ -207,8 +279,14 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
> pte_t gpte;
> pte_t *spte;
>
> +#ifdef CONFIG_X86_PAE
> + pmd_t *spmd;
> + pmd_t gpmd;
> +#endif
> +
> /* First step: get the top-level Guest page table entry. */
> - gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
> + gpgd = lgread(cpu, (unsigned long) gpgd_addr(cpu, vaddr), pgd_t);
> +
> /* Toplevel not present? We can't map it in. */
> if (!(pgd_flags(gpgd) & _PAGE_PRESENT))
> return false;
> @@ -231,9 +309,38 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
> *spgd = __pgd(__pa(ptepage) | pgd_flags(gpgd));
> }
>
> +#ifdef CONFIG_X86_PAE
> + gpmd = lgread(cpu, (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
> + /* middle level not present? We can't map it in. */
> + if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
> + return 0;
> +
> + /* Now look at the matching shadow entry. */
> + spmd = spmd_addr(cpu, *spgd, vaddr);
> +
> + if (!(pmd_flags(*spmd) & _PAGE_PRESENT)) {
> + /* No shadow entry: allocate a new shadow PTE page. */
> + unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
> +
> + /* This is not really the Guest's fault, but killing it is
> + * simple for this corner case. */
> + if (!ptepage) {
> + kill_guest(cpu, "out of memory allocating pte page");
> + return 0;
> + }
> +
> + /* We check that the Guest pmd is OK. */
> + check_gpmd(cpu, gpmd);
> +
> + /* And we copy the flags to the shadow PMD entry. The page
> + * number in the shadow PMD is the page we just allocated. */
> + *spmd = __pmd(__pa(ptepage) | pmd_flags(gpmd));
> + }
> +#endif
> +
> /* OK, now we look at the lower level in the Guest page table: keep its
> * address, because we might update it later. */
> - gpte_ptr = gpte_addr(gpgd, vaddr);
> + gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
> gpte = lgread(cpu, gpte_ptr, pte_t);
>
> /* If this page isn't in the Guest page tables, we can't page it in. */
> @@ -259,7 +366,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
> gpte = pte_mkdirty(gpte);
>
> /* Get the pointer to the shadow PTE entry we're going to set. */
> - spte = spte_addr(*spgd, vaddr);
> + spte = spte_addr(cpu, *spgd, vaddr);
> /* If there was a valid shadow PTE entry here before, we release it.
> * This can happen with a write to a previously read-only entry. */
> release_pte(*spte);
> @@ -301,14 +408,24 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
> pgd_t *spgd;
> unsigned long flags;
>
> +#ifdef CONFIG_X86_PAE
> + pmd_t *spmd;
> +#endif
> +
> /* Look at the current top level entry: is it present? */
> spgd = spgd_addr(cpu, cpu->cpu_pgd, vaddr);
> if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
> return false;
>
> +#ifdef CONFIG_X86_PAE
> + spmd = spmd_addr(cpu, *spgd, vaddr);
> + if (!(pmd_flags(*spmd) & _PAGE_PRESENT))
> + return false;
> +#endif
> +
> /* Check the flags on the pte entry itself: it must be present and
> * writable. */
> - flags = pte_flags(*(spte_addr(*spgd, vaddr)));
> + flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
>
> return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
> }
> @@ -322,8 +439,45 @@ void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
> kill_guest(cpu, "bad stack page %#lx", vaddr);
> }
>
> +#ifdef CONFIG_X86_PAE
> +static void release_pmd(pmd_t *spmd)
> +{
> + /* If the entry's not present, there's nothing to release. */
> + if (pmd_flags(*spmd) & _PAGE_PRESENT) {
> + unsigned int i;
> + pte_t *ptepage = __va(pmd_pfn(*spmd) << PAGE_SHIFT);
> + /* For each entry in the page, we might need to release it. */
> + for (i = 0; i < PTRS_PER_PTE; i++)
> + release_pte(ptepage[i]);
> + /* Now we can free the page of PTEs */
> + free_page((long)ptepage);
> + /* And zero out the PMD entry so we never release it twice. */
> + native_set_pmd(spmd, __pmd(0));
> + }
> +}
> +
> +/*H:450 If we chase down the release_pgd() code, it looks like this: */
> +static void release_pgd(pgd_t *spgd)
> +{
> + /* If the entry's not present, there's nothing to release. */
> + if (pgd_flags(*spgd) & _PAGE_PRESENT) {
> + unsigned int i;
> + pmd_t *pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
> +
> + for (i = 0; i < PTRS_PER_PMD; i++)
> + release_pmd(&pmdpage[i]);
> +
> + /* Now we can free the page of PMDs */
> + free_page((long)pmdpage);
> + /* And zero out the PGD entry so we never release it twice. */
> + native_set_pud ((pud_t *)spgd, __pud(0));
> + }
> +}
> +
> +#else /* !CONFIG_X86_PAE */
> +
> /*H:450 If we chase down the release_pgd() code, it looks like this: */
> -static void release_pgd(struct lguest *lg, pgd_t *spgd)
> +static void release_pgd(pgd_t *spgd)
> {
> /* If the entry's not present, there's nothing to release. */
> if (pgd_flags(*spgd) & _PAGE_PRESENT) {
> @@ -342,15 +496,18 @@ static void release_pgd(struct lguest *lg, pgd_t *spgd)
> }
> }
>
> +#endif
> +
> /*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
> * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
> * It simply releases every PTE page from 0 up to the Guest's kernel address. */
> static void flush_user_mappings(struct lguest *lg, int idx)
> {
> unsigned int i;
> +
> /* Release every pgd entry up to the kernel's address. */
> for (i = 0; i < pgd_index(lg->kernel_address); i++)
> - release_pgd(lg, lg->pgdirs[idx].pgdir + i);
> + release_pgd(lg->pgdirs[idx].pgdir + i);
> }
>
> /*H:440 (v) Flushing (throwing away) page tables,
> @@ -370,15 +527,30 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
> pgd_t gpgd;
> pte_t gpte;
>
> +#ifdef CONFIG_X86_PAE
> + pmd_t gpmd;
> +#endif
> +
> +
> /* First step: get the top-level Guest page table entry. */
> - gpgd = lgread(cpu, gpgd_addr(cpu, vaddr), pgd_t);
> + gpgd = lgread(cpu, (unsigned long) gpgd_addr(cpu, vaddr), pgd_t);
> /* Toplevel not present? We can't map it in. */
> if (!(pgd_flags(gpgd) & _PAGE_PRESENT)) {
> kill_guest(cpu, "Bad address %#lx", vaddr);
> return -1UL;
> }
>
> - gpte = lgread(cpu, gpte_addr(gpgd, vaddr), pte_t);
> + gpte = lgread(cpu, gpte_addr(cpu, gpgd, vaddr), pte_t);
> +
> +#ifdef CONFIG_X86_PAE
> + gpmd = lgread(cpu, (unsigned long) gpmd_addr(gpgd, vaddr), pmd_t);
> + if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
> + kill_guest(cpu, "Bad address %#lx", vaddr);
> +#endif
> +
> + gpte = lgread(cpu, (unsigned long) gpte_addr(cpu, gpgd, vaddr), pte_t);
> +
> +
> if (!(pte_flags(gpte) & _PAGE_PRESENT))
> kill_guest(cpu, "Bad address %#lx", vaddr);
>
> @@ -388,7 +560,7 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
> /* We keep several page tables. This is a simple routine to find the page
> * table (if any) corresponding to this top-level address the Guest has given
> * us. */
> -static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
> +static unsigned int find_pgdir(struct lguest *lg, pgd_t *pgtable)
> {
> unsigned int i;
> for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
> @@ -401,10 +573,13 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
> * allocate a new one (and so the kernel parts are not there), we set
> * blank_pgdir. */
> static unsigned int new_pgdir(struct lg_cpu *cpu,
> - unsigned long gpgdir,
> + pgd_t *gpgdir,
> int *blank_pgdir)
> {
> unsigned int next;
> +#ifdef CONFIG_X86_PAE
> + pmd_t *pmd_table;
> +#endif
>
> /* We pick one entry at random to throw out. Choosing the Least
> * Recently Used might be better, but this is easy. */
> @@ -413,13 +588,36 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
> if (!cpu->lg->pgdirs[next].pgdir) {
> cpu->lg->pgdirs[next].pgdir =
> (pgd_t *)get_zeroed_page(GFP_KERNEL);
> +
> /* If the allocation fails, just keep using the one we have */
> if (!cpu->lg->pgdirs[next].pgdir)
> next = cpu->cpu_pgd;
> +
> +#ifdef CONFIG_X86_PAE
> + else {
>
It would be clearer to move the #ifdef into the else {} block, so it
doesn't visually parse as an if() with two else clauses.
> + /* In PAE mode, allocate a pmd page and populate the
> + * last pgd entry. */
> + pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
> + if (!pmd_table){
> + free_page ((long) cpu->lg->pgdirs[next].pgdir);
> + native_set_pud((pud_t *)cpu->lg->pgdirs[next].pgdir, __pud(0));
> + next = cpu->cpu_pgd;
> + }
> + else {
> +
> + native_set_pud((pud_t *) cpu->lg->pgdirs[next].pgdir +
> + SWITCHER_PGD_INDEX,
> + __pud(__pa(pmd_table) | _PAGE_PRESENT));
> +
> + /* This is a blank page, so there are no kernel
> + * mappings: caller must map the stack! */
> + *blank_pgdir = 1;
> + }
> + }
> +#else
> else
> - /* This is a blank page, so there are no kernel
> - * mappings: caller must map the stack! */
> *blank_pgdir = 1;
> +#endif
> }
> /* Record which Guest toplevel this shadows. */
> cpu->lg->pgdirs[next].gpgdir = gpgdir;
> @@ -431,7 +629,7 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
>
> /*H:430 (iv) Switching page tables
> *
> - * Now we've seen all the page table setting and manipulation, let's see what
> + * Now we've seen all the page table setting and manipulation, let's see
> * what happens when the Guest changes page tables (ie. changes the top-level
> * pgdir). This occurs on almost every context switch. */
> void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
> @@ -439,11 +637,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
> int newpgdir, repin = 0;
>
> /* Look to see if we have this one already. */
> - newpgdir = find_pgdir(cpu->lg, pgtable);
> + newpgdir = find_pgdir(cpu->lg, (pgd_t *)pgtable);
> /* If not, we allocate or mug an existing one: if it's a fresh one,
> * repin gets set to 1. */
> if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
> - newpgdir = new_pgdir(cpu, pgtable, &repin);
> + newpgdir = new_pgdir(cpu, (pgd_t *)pgtable, &repin);
> /* Change the current pgd index to the new one. */
> cpu->cpu_pgd = newpgdir;
> /* If it was completely blank, we map in the Guest kernel stack */
> @@ -456,14 +654,30 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
> * when we destroy the Guest. */
> static void release_all_pagetables(struct lguest *lg)
> {
> - unsigned int i, j;
> + unsigned int i, j, k;
> +
> +#ifdef CONFIG_X86_PAE
> + pgd_t *spgd;
> + pmd_t *pmdpage;
> +#endif
>
> /* Every shadow pagetable this Guest has */
> for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
> - if (lg->pgdirs[i].pgdir)
> + if (lg->pgdirs[i].pgdir) {
> /* Every PGD entry except the Switcher at the top */
> for (j = 0; j < SWITCHER_PGD_INDEX; j++)
> - release_pgd(lg, lg->pgdirs[i].pgdir + j);
> + release_pgd(lg->pgdirs[i].pgdir + j);
> +#ifdef CONFIG_X86_PAE
> + /* Get the last pmd page. */
> + spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
> + pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
> +
> + /* And release the pmd entries of that pmd page,
> + * except for the switcher pmd. */
> + for (k = 0; k < SWITCHER_PMD_INDEX; k++)
> + release_pmd(&pmdpage[k]);
> +#endif
> + }
> }
>
> /* We also throw away everything when a Guest tells us it's changed a kernel
> @@ -505,23 +719,39 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
> /* Look up the matching shadow page directory entry. */
> pgd_t *spgd = spgd_addr(cpu, idx, vaddr);
>
> +#ifdef CONFIG_X86_PAE
> + pmd_t *spmd;
> +#endif
> +
> /* If the top level isn't present, there's no entry to update. */
> if (pgd_flags(*spgd) & _PAGE_PRESENT) {
> - /* Otherwise, we start by releasing the existing entry. */
> - pte_t *spte = spte_addr(*spgd, vaddr);
> - release_pte(*spte);
> -
> - /* If they're setting this entry as dirty or accessed, we might
> - * as well put that entry they've given us in now. This shaves
> - * 10% off a copy-on-write micro-benchmark. */
> - if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
> - check_gpte(cpu, gpte);
> - *spte = gpte_to_spte(cpu, gpte,
> - pte_flags(gpte) & _PAGE_DIRTY);
> - } else
> - /* Otherwise kill it and we can demand_page() it in
> - * later. */
> - *spte = __pte(0);
> +
> +#ifdef CONFIG_X86_PAE
> + spmd = spmd_addr(cpu, *spgd, vaddr);
> + if (pmd_flags(*spmd) & _PAGE_PRESENT) {
> +#endif
> +
> + /* Otherwise, we start by releasing
> + * the existing entry. */
> + pte_t *spte = spte_addr(cpu, *spgd, vaddr);
> + release_pte(*spte);
> +
> + /* If they're setting this entry as dirty or accessed,
> + * we might as well put that entry they've given us
> + * in now. This shaves 10% off a
> + * copy-on-write micro-benchmark. */
> + if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
> + check_gpte(cpu, gpte);
> + native_set_pte (spte,
> + gpte_to_spte(cpu, gpte,
> + pte_flags(gpte) & _PAGE_DIRTY));
> + } else
> + /* Otherwise kill it and we can demand_page()
> + * it in later. */
> + native_set_pte (spte, __pte(0));
> +#ifdef CONFIG_X86_PAE
> + }
> +#endif
> }
> }
>
> @@ -547,7 +777,7 @@ void guest_set_pte(struct lg_cpu *cpu,
> do_set_pte(cpu, i, vaddr, gpte);
> } else {
> /* Is this page table one we have a shadow for? */
> - int pgdir = find_pgdir(cpu->lg, gpgdir);
> + int pgdir = find_pgdir(cpu->lg, (pgd_t *)gpgdir);
> if (pgdir != ARRAY_SIZE(cpu->lg->pgdirs))
> /* If so, do the update. */
> do_set_pte(cpu, pgdir, vaddr, gpte);
> @@ -568,9 +798,38 @@ void guest_set_pte(struct lg_cpu *cpu,
> *
> * So with that in mind here's our code to to update a (top-level) PGD entry:
> */
> -void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
> +
> +#ifdef CONFIG_X86_PAE
> +void guest_set_pud(struct lguest *lg, unsigned long pudp, u32 idx)
> +{
> + int pgdir;
> + pgd_t *gpgdir = (pgd_t *) pudp;
> +
> + if (idx >= SWITCHER_PGD_INDEX){
> + printk ("tryied to map on the last pgd entry\n");
> + return;
> +
> + }
> +
> + /* If they're talking about a page table we have a shadow for... */
> + pgdir = find_pgdir(lg, gpgdir);
> + if (pgdir < ARRAY_SIZE(lg->pgdirs))
> + /* ... throw it away. */
> + release_pgd(lg->pgdirs[pgdir].pgdir + idx);
> +
> +}
> +
> +void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
> +{
> + guest_pagetable_clear_all(&lg->cpus[0]); //ugly
> +}
> +
> +#else /*!CONFIG_X86_PAE*/
> +
> +void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
> {
> int pgdir;
> + pgd_t *gpgdir = (pgd_t *) pmdp;
>
> /* The kernel seems to try to initialize this early on: we ignore its
> * attempts to map over the Switcher. */
> @@ -581,8 +840,9 @@ void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx)
> pgdir = find_pgdir(lg, gpgdir);
> if (pgdir < ARRAY_SIZE(lg->pgdirs))
> /* ... throw it away. */
> - release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx);
> + release_pgd(lg->pgdirs[pgdir].pgdir + idx);
> }
> +#endif
>
> /* Once we know how much memory we have we can construct simple identity
> * (which set virtual == physical) and linear mappings
> @@ -596,8 +856,14 @@ static unsigned long setup_pagetables(struct lguest *lg,
> {
> pgd_t __user *pgdir;
> pte_t __user *linear;
> - unsigned int mapped_pages, i, linear_pages, phys_linear;
> unsigned long mem_base = (unsigned long)lg->mem_base;
> + unsigned int mapped_pages, i, linear_pages;
> +#ifdef CONFIG_X86_PAE
> + u64 *pmds;
> + unsigned int j;
> +#else
> + unsigned int phys_linear;
> +#endif
>
> /* We have mapped_pages frames to map, so we need
> * linear_pages page tables to map them. */
> @@ -609,6 +875,9 @@ static unsigned long setup_pagetables(struct lguest *lg,
>
> /* Now we use the next linear_pages pages as pte pages */
> linear = (void *)pgdir - linear_pages * PAGE_SIZE;
> +#ifdef CONFIG_X86_PAE
> + pmds = (void *)linear - PAGE_SIZE;
> +#endif
>
> /* Linear mapping is easy: put every page's address into the
> * mapping in order. */
> @@ -619,8 +888,26 @@ static unsigned long setup_pagetables(struct lguest *lg,
> return -EFAULT;
> }
>
> +#ifdef CONFIG_X86_PAE
> /* The top level points to the linear page table pages above.
> * We setup the identity and linear mappings here. */
> + for (i = 0, j = 0; i < mapped_pages; i += PTRS_PER_PTE, j++) {
> + pmd_t pmd;
> + pmd = __pmd( ((unsigned long)(linear+i) - mem_base) |
> + _PAGE_PRESENT | _PAGE_RW | _PAGE_USER);
> + if (copy_to_user(&pmds[j], &pmd, sizeof(pmd)) != 0)
> + return -EFAULT;
> + }
> + pgd_t pgd;
> + pgd = __pgd((((u32)pmds) - mem_base) | _PAGE_PRESENT);
> +
> + if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
> + return -EFAULT;
> +
> + if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
> + return -EFAULT;
> +
> +#else
> phys_linear = (unsigned long)linear - mem_base;
> for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
> pgd_t pgd;
> @@ -633,6 +920,7 @@ static unsigned long setup_pagetables(struct lguest *lg,
> &pgd, sizeof(pgd)))
> return -EFAULT;
> }
> +#endif
>
> /* We return the top level (guest-physical) address: remember where
> * this is. */
> @@ -648,6 +936,10 @@ int init_guest_pagetable(struct lguest *lg)
> u64 mem;
> u32 initrd_size;
> struct boot_params __user *boot = (struct boot_params *)lg->mem_base;
> +#ifdef CONFIG_X86_PAE
> + pgd_t *pgd;
> + pmd_t *pmd_table;
> +#endif
>
> /* Get the Guest memory size and the ramdisk size from the boot header
> * located at lg->mem_base (Guest address 0). */
> @@ -657,12 +949,23 @@ int init_guest_pagetable(struct lguest *lg)
>
> /* We start on the first shadow page table, and give it a blank PGD
> * page. */
> - lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
> - if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
> - return lg->pgdirs[0].gpgdir;
> + lg->pgdirs[0].gpgdir = (pgd_t *) setup_pagetables(lg, mem, initrd_size);
> + if (IS_ERR_VALUE((int) lg->pgdirs[0].gpgdir))
> + return (int) lg->pgdirs[0].gpgdir;
> lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
> if (!lg->pgdirs[0].pgdir)
> return -ENOMEM;
> +#ifdef CONFIG_X86_PAE
> + pgd = lg->pgdirs[0].pgdir;
> + pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
> + if (!pmd_table)
> + return -ENOMEM;
> +
> + native_set_pud((pud_t *) pgd + SWITCHER_PGD_INDEX,
> + __pud(__pa(pmd_table) | _PAGE_PRESENT));
> +
> +#endif
> +
> lg->cpus[0].cpu_pgd = 0;
> return 0;
> }
> @@ -670,21 +973,36 @@ int init_guest_pagetable(struct lguest *lg)
> /* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
> void page_table_guest_data_init(struct lg_cpu *cpu)
> {
> +#ifdef CONFIG_X86_PAE
> + const unsigned long reserve_mb = 2;
> +#else
> + const unsigned long reserve_mb = 4;
> +#endif
> +
> /* We get the kernel address: above this is all kernel memory. */
> if (get_user(cpu->lg->kernel_address,
> - &cpu->lg->lguest_data->kernel_address)
> - /* We tell the Guest that it can't use the top 4MB of virtual
> - * addresses used by the Switcher. */
> - || put_user(4U*1024*1024, &cpu->lg->lguest_data->reserve_mem)
> - || put_user(cpu->lg->pgdirs[0].gpgdir, &cpu->lg->lguest_data->pgdir))
> + &cpu->lg->lguest_data->kernel_address)
> + /* We tell the Guest that it can't use the top 2 or 4 MB
> + * of virtual addresses used by the Switcher. */
> + || put_user(reserve_mb * 1024 * 1024,
> + &cpu->lg->lguest_data->reserve_mem)
> + || put_user((unsigned long) cpu->lg->pgdirs[0].gpgdir,
> + &cpu->lg->lguest_data->pgdir))
> kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
>
> /* In flush_user_mappings() we loop from 0 to
> * "pgd_index(lg->kernel_address)". This assumes it won't hit the
> * Switcher mappings, so check that now. */
> +#ifdef CONFIG_X86_PAE
> + if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX)
> + if (pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
> + kill_guest(cpu, "bad kernel address %#lx",
> + cpu->lg->kernel_address);
> +#else
> if (pgd_index(cpu->lg->kernel_address) >= SWITCHER_PGD_INDEX)
> kill_guest(cpu, "bad kernel address %#lx",
> cpu->lg->kernel_address);
> +#endif
> }
>
> /* When a Guest dies, our cleanup is fairly simple. */
> @@ -708,15 +1026,28 @@ void free_guest_pagetable(struct lguest *lg)
> void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
> {
> pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
> - pgd_t switcher_pgd;
> pte_t regs_pte;
> unsigned long pfn;
>
> +#ifdef CONFIG_X86_PAE
> + pmd_t switcher_pmd;
> + pmd_t *pmd_table;
> +
> + switcher_pmd = pfn_pmd(__pa(switcher_pte_page) >>
> + PAGE_SHIFT, __pgprot(__PAGE_KERNEL));
> + pmd_table = __va(pgd_pfn(cpu->lg->
> + pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
> + << PAGE_SHIFT);
> + pmd_table[SWITCHER_PMD_INDEX] = switcher_pmd;
> +
> +#else
> + pgd_t switcher_pgd;
> +
> /* Make the last PGD entry for this Guest point to the Switcher's PTE
> * page for this CPU (with appropriate flags). */
> switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL);
> -
> cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
> +#endif
>
> /* We also change the Switcher PTE page. When we're running the Guest,
> * we want the Guest's "regs" page to appear where the first Switcher
> @@ -727,7 +1058,8 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
> * again. */
> pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
> regs_pte = pfn_pte(pfn, __pgprot(__PAGE_KERNEL));
> - switcher_pte_page[(unsigned long)pages/PAGE_SIZE%PTRS_PER_PTE] = regs_pte;
> + switcher_pte_page[(unsigned long)pages / PAGE_SIZE % PTRS_PER_PTE]
> + = regs_pte;
> }
> /*:*/
>
> @@ -752,21 +1084,23 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
>
> /* The first entries are easy: they map the Switcher code. */
> for (i = 0; i < pages; i++) {
> - pte[i] = mk_pte(switcher_page[i],
> - __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
> + native_set_pte(&pte[i], mk_pte(switcher_page[i],
> + __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
> }
>
> /* The only other thing we map is this CPU's pair of pages. */
> i = pages + cpu*2;
>
> /* First page (Guest registers) is writable from the Guest */
> - pte[i] = pfn_pte(page_to_pfn(switcher_page[i]),
> - __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW));
> + native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
> + __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
>
> /* The second page contains the "struct lguest_ro_state", and is
> * read-only. */
> - pte[i+1] = pfn_pte(page_to_pfn(switcher_page[i+1]),
> - __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
> + native_set_pte(&pte[i+1],pfn_pte(page_to_pfn(switcher_page[i+1]),
> + __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)) );
> +
> +// look rules for set_pte at pgtable-3level.h
> }
>
> /* We've made it through the page table code. Perhaps our tired brains are
>
>
> _______________________________________________
> Virtualization mailing list
> Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
> https://lists.linux-foundation.org/mailman/listinfo/virtualization
>
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/virtualization
