From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
When using external USB PHY or USB hub, it is common that they require a clock
input.
Add a 'clk_phy' clock, so that it can be retrieved from the device tree and
enabled in the driver, so that the clock can properly drive the external
USB phy/hub.
Tested on a imx6q-udoo board, that connects via USBH1 to a USB2514 hub.
In this board the USB2514 is clocked from a 24MHz clock that comes from the
imx6q CLKO2 pin.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
Changes since v1:
- Fix the clock error handling (Russell King)
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt | 2 ++
drivers/usb/chipidea/ci_hdrc_imx.c | 13 +++++++++++++
2 files changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index b4b5b79..07ba38c 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -18,6 +18,8 @@ Optional properties:
- vbus-supply: regulator for vbus
- disable-over-current: disable over current detect
- external-vbus-divider: enables off-chip resistor divider for Vbus
+- clocks: phandle to the clock that drives the USB hub
+- clock-names: must be "phy"
Examples:
usb@02184000 { /* USB OTG */
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index bb5d976..3edf10a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -27,6 +27,7 @@ struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
+ struct clk *clk_phy;
struct imx_usbmisc_data *usbmisc_data;
};
@@ -148,6 +149,16 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
}
}
+ data->clk_phy = devm_clk_get(&pdev->dev, "phy");
+ if (!IS_ERR(data->clk_phy)) {
+ ret = clk_prepare_enable(data->clk_phy);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable clk_phy: %d\n", ret);
+ goto disable_device;
+ }
+ }
+
platform_set_drvdata(pdev, data);
pm_runtime_no_callbacks(&pdev->dev);
@@ -167,6 +178,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
+ if (!IS_ERR(data->clk_phy))
+ clk_disable_unprepare(data->clk_phy);
ci_hdrc_remove_device(data->ci_pdev);
clk_disable_unprepare(data->clk);
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
