Be aware that the mailing list doesn't like HTML. Plain-text only, please. On Mon, 28 Oct 2013, zouid abdelhamid wrote: > Hi folks, > > > > I am > testing a USB MSC, device mode, using USBCV2.0 . > > The device > is an ARM based platform with a USB DRD that is running 3.4 kernel, the USB > port is configured as �device�. > > When it > comes to �Error recovery test� , it fails showing the following messages: > > > > ERROR CSW > endpoint status returned STALL after BOT MSC Reset > > FAIL (5.5.4) > The device must support the Bulk-Only Mass Storage Reset. > > > > Actually I > am a little bit confused if it is a Software issue rather than hardware, and I > wonder if there is an existing patch for fixing this in the kernel. It's kind of hard to say, since you didn't tell us what platform and which UDC driver you are using. Why don't you try running an up-to-date kernel, like 3.11, instead? Then if there is an existing patch, you'll find out because the test will succeed. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
