From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> Hi, Here is fifth version of MSM USB3 drivers patches. Changes since v4: * Substitute references to "wc3" with just "dw" in USB PHY drivers and file names. This is to indicate that the PHY's are DesignWare, but not necessarily related to DWC3 IP core. Changes since v3: * Remove "_clk" suffix from clock names * Clarify required child node for qcom,dwc3 * Fix comments in functions headers * Use dbg instead err in drivers probe functions. Changes since v2: * Several improvements in devicetree bindings description * Disable regulators in glue layer if there is error during ioremap. Changes since first version: * Split devicetree bindings description file to separate patch * Address comments for device bindings description * Fix typo in 'gdsc' requlator name. These patches add basic support for USB3.0 controllers found on MSM platforms. USB3.0 core is based on Synopsys DesignWare SuperSpeed IP. Generated on top of Felipe 'testing' branch. Ivan T. Ivanov (3): usb: dwc3: msm: Add device tree binding information usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DW PHY's usb: dwc3: Add Qualcomm DWC3 glue layer driver .../devicetree/bindings/usb/msm-ssusb.txt | 104 ++++++ drivers/usb/dwc3/Kconfig | 8 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-msm.c | 167 +++++++++ drivers/usb/phy/Kconfig | 11 + drivers/usb/phy/Makefile | 2 + drivers/usb/phy/phy-msm-dw-hs.c | 327 +++++++++++++++++ drivers/usb/phy/phy-msm-dw-ss.c | 374 ++++++++++++++++++++ 8 files changed, 994 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/msm-ssusb.txt create mode 100644 drivers/usb/dwc3/dwc3-msm.c create mode 100644 drivers/usb/phy/phy-msm-dw-hs.c create mode 100644 drivers/usb/phy/phy-msm-dw-ss.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
