Hi,
On Wed, Jun 26, 2013 at 02:59:14PM +0530, George Cherian wrote:
> There can be configurations in which DWC3 is hoooked up only to USB2 PHY.
> In such cases we should not return -EPROBE_DEFER, rather continue probe
> even if there is no USB3 PHY.
>
> Signed-off-by: George Cherian <george.cherian@xxxxxx>
> ---
> drivers/usb/dwc3/core.c | 31 ++++++++++++++++++++++++-------
> 1 file changed, 24 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index c35d49d..d5e6f3e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -100,7 +100,9 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
> dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>
> usb_phy_init(dwc->usb2_phy);
> - usb_phy_init(dwc->usb3_phy);
> +
> + if (dwc->usb3_phy)
> + usb_phy_init(dwc->usb3_phy);
I would feel more comfortable if you would move our maximum_speed module
parameter to DT with a property such as:
snps,maximum_speed = "highspeed";
then on driver you could:
ret = of_property_read_string(np, "snps,maximum_speed", &maximum_speed);
if (ret < 0)
bailout();
if (strncmp(maximum_speed, "superspeed", 10) == 0) {
/* grab USB3 PHY, return EPROBE_DEFER if not found */
grab_usb3_phy();
}
if ((strncmp(maximum_speed, "highspeed", 9) == 0) ||
(strncmp(maximum_speed, "fullspeed", 9) == 0) ||
(strncmp(maximum_speed, "lowspeed", 8) == 0)) {
/* grab USB2 PHY, return EPROBE_DEFER if not found */
grab_usb2_phy();
}
this way, we depend solely on setting maximum_speed to highspeed for
AM437x :-)
ps: don't forget to default to superspeed in case no property is passed.
--
balbi
Attachment:
signature.asc
Description: Digital signature
