[PATCH 1/7] staging: dwc2: replace some magic numbers by constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There were already macros for these, they just weren't being used in a
few places.

Signed-off-by: Matthijs Kooijman <matthijs@xxxxxxxx>
---
 drivers/staging/dwc2/core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c
index 3177db2..281ca95 100644
--- a/drivers/staging/dwc2/core.c
+++ b/drivers/staging/dwc2/core.c
@@ -1696,7 +1696,7 @@ u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
 	    GHWCFG2_FS_PHY_TYPE_DEDICATED)
 		clock = 48;
 
-	if ((hprt0 & HPRT0_SPD_MASK) == 0)
+	if ((hprt0 & HPRT0_SPD_MASK) == HPRT0_SPD_HIGH_SPEED)
 		/* High speed case */
 		return 125 * clock;
 	else
@@ -2298,7 +2298,7 @@ int dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val)
 #ifndef NO_FS_PHY_HW_CHECKS
 		valid = 0;
 #else
-		val = 0;
+		val = DWC2_PHY_TYPE_PARAM_FS;
 		dev_dbg(hsotg->dev, "Setting phy_type to %d\n", val);
 		retval = -EINVAL;
 #endif
@@ -2325,7 +2325,7 @@ int dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val)
 			dev_err(hsotg->dev,
 				"%d invalid for phy_type. Check HW configuration.\n",
 				val);
-		val = 0;
+		val = DWC2_PHY_TYPE_PARAM_FS;
 		if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) {
 			if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI ||
 			    hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)
@@ -2360,8 +2360,8 @@ int dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val)
 		valid = 0;
 	}
 
-	if (val == 0 && dwc2_get_param_phy_type(hsotg) ==
-					DWC2_PHY_TYPE_PARAM_FS)
+	if (val == DWC2_SPEED_PARAM_HIGH &&
+	    dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS)
 		valid = 0;
 
 	if (!valid) {
@@ -2370,7 +2370,7 @@ int dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val)
 				"%d invalid for speed parameter. Check HW configuration.\n",
 				val);
 		val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS ?
-				1 : 0;
+				DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH;
 		dev_dbg(hsotg->dev, "Setting speed to %d\n", val);
 		retval = -EINVAL;
 	}
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux