Add platform device for 'nop-usb-xceiv'. This will be used as a
PHY for HS USB Port 1, so provide binding information for it.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Acked-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/mach-omap2/board-devkit8000.c | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 53056c3..922ca91 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -33,6 +33,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/usb/phy.h>
#include "id.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -430,22 +431,21 @@ static void __init omap_dm9000_init(void)
eth_addr[5] = (odi.id_0 & 0x000000ff);
}
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct platform_device hsusb1_phy_device = {
+ .name = "nop_usb_xceiv",
+ .id = 1,
+};
+
static struct platform_device *devkit8000_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
&omap_dm9000_dev,
+ &hsusb1_phy_device,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -625,6 +625,10 @@ static void __init devkit8000_init(void)
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ /* PHY on HSUSB Port 1 i.e. index 0 */
+ usb_bind_phy("ehci-omap.0", 0, "nop_usb_xceiv.1");
+
usbhs_init(&usbhs_bdata);
board_nand_init(devkit8000_nand_partitions,
ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
