Hi Roger,
On 03/12/2013 12:43 PM, Roger Quadros wrote:
> Currently on OMAP, it is not possible to specify a clock consumer
> to any of the OMAP generated clocks using the device tree. This can pose
> a problem for external devices that run off an OMAP clock as we
> can't reliably provide a reference to the clock in the device tree.
I'm really confused by that statement... Why cannot you use the current
clock binding definition?
The point is that we should avoid defining temporary custom bindings.
Especially when a generic one already exist.
I know you already discussed that on the list, but I cannot really find
the rational in the previous thread.
Here is a quote from the original "Subject: Re: how to specify an OMAP
clock in device tree?" thread.
> /* provider */
> clks: omapclocks {
> compatible = "ti,omapclocks";
> #clock-cells = <1>;
> };
>
> /* consumer */
> hsusb1_phy: hsusb1_phy {
> compatible = "usb-nop-xceiv";
> clocks = <&clks "auxclk3_ck">; /* FREF_CLK3 */
> clock-names = "main-clk";
> };
>
> The only problem I see is that the argument to the clks phandle
> cannot be a string. It needs to be u32.
>
> In that case we need to map all clocks into a u32 index.
>
> If we can do that only for auxclks, my problem is solved for panda.
phandle is u32 as always, but you should not care about that.
What you care about is the clock node referenced by the phandle, not the
phandle itself.
What is missing right now is a proper of_clk_add_provider call to
declare a generic OMAP clock provider and thus allow OMAP clocks to be
used with DT.
The AUXCLOCKs are managed by the SCRM which is outside the PRCM, so you
should be able to add a clock providers dedicated to the SCRM clocks only.
Regards,
Benoit
> This patch allows device trees to provide a node that contains the
> clock identifier, clock alias and the device phandle. The board
> initialization code then creates a clock alias to this clock id,
> and associates it with the device whose phandle was supplied.
>
> Discussion
> http://www.spinics.net/lists/linux-omap/msg86241.html
>
> CC: Russell King <linux@xxxxxxxxxxxxxxxx>
> CC: Rajendra Nayak <rnayak@xxxxxx>
> CC: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> .../devicetree/bindings/clock/ti-clock-alias.txt | 26 ++++++++
> arch/arm/mach-omap2/board-generic.c | 67 ++++++++++++++++++++
> 2 files changed, 93 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ti-clock-alias.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/ti-clock-alias.txt b/Documentation/devicetree/bindings/clock/ti-clock-alias.txt
> new file mode 100644
> index 0000000..87ef4c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti-clock-alias.txt
> @@ -0,0 +1,26 @@
> +* Clock alias provision for TI OMAP2+ boards
> +
> +This binding allows the board's device tree file to specify a clock name,
> +device phandle and clock alias so that that clock can be associated
> +to the device with the alias.
> +
> +This is required in cases where an external device is clocked by an
> +OMAP generated clock and needs to be assocated to it.
> +
> +NOTE: The node's name should be clock_alias
> +
> +Required properties
> +- clock-name: The clock identifier string. Should be one of the
> + clock ids defined in OMAP common clock data.
> +- clock-alias: A string specifying the alias that must be created to the clock.
> +- device: A phandle to the device this clock should be associated to.
> +
> +e.g. On the OMAP4 Panda board, the USB PHY device is clocked by the
> +FREF_CLK3 (auxclk3_ck) from the OMAP. The PHY driver expexts the clock to
> +be named "main_clk". This binding can be provided like so
> +
> +clock_alias {
> + clock-name = "auxclk3_ck";
> + clock-alias = "main_clk";
> + device = <&hsusb1_phy>;
> +};
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 0274ff7..2fc48f9 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -15,6 +15,9 @@
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/irqdomain.h>
> +#include <linux/clk.h>
> +#include <linux/string.h>
> +#include <linux/slab.h>
>
> #include <asm/mach/arch.h>
>
> @@ -35,12 +38,76 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
> { }
> };
>
> +static int __init omap_create_clk_alias(struct device_node *np)
> +{
> + int ret = 0;
> + const char *s, *alias;
> + char *clk_id;
> + struct device_node *dev_np;
> + struct platform_device *pdev;
> +
> + of_property_read_string(np, "clock-name", &s);
> + if (!s) {
> + pr_err("%s: couldn't find clock-name property in node %s\n",
> + __func__, np->name);
> + return -ENODEV;
> + }
> +
> + clk_id = kstrdup(s, GFP_KERNEL);
> + if (!clk_id)
> + return -ENOMEM;
> +
> + dev_np = of_parse_phandle(np, "device", 0);
> + if (!dev_np) {
> + pr_err("%s: couldn't find device phandle for \'%s\'\n",
> + __func__, clk_id);
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> + pdev = of_find_device_by_node(dev_np);
> + if (!pdev) {
> + pr_err("%s: couldn't find device for clock \'%s\'\n",
> + __func__, clk_id);
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> + ret = of_property_read_string(np, "clock-alias", &alias);
> + if (ret) {
> + pr_err("%s: couldn't find alias for clock \'%s\'\n",
> + __func__, clk_id);
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> + ret = clk_add_alias(alias, dev_name(&pdev->dev), clk_id, NULL);
> + if (ret) {
> + pr_err("%s: couldn't add alias \'%s\' to clock \'%s\'\n",
> + __func__, alias, clk_id);
> + ret = -ENODEV;
> + goto exit;
> + }
> +
> +exit:
> + kfree(clk_id);
> + return ret;
> +}
> +
> static void __init omap_generic_init(void)
> {
> + struct device_node *np;
> +
> omap_sdrc_init(NULL, NULL);
>
> of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
>
> + /* create clock aliases based on 'clock_alias' nodes */
> + for_each_node_by_name(np, "clock_alias") {
> + omap_create_clk_alias(np);
> + of_node_put(np);
> + }
> +
> /*
> * HACK: call display setup code for selected boards to enable omapdss.
> * This will be removed when omapdss supports DT.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
