On 03/09/2013 05:10 AM, Jenya Y wrote:
On 03/09/2013 04:03 AM, Jenya Y wrote:
Okay, this is good.
It looks like your .config has CONFIG_USB_EHCI_HCD=y and
CONFIG_USB_UHCI_HCD=y, right? And it also has CONFIG_USB_EHCI_PCI=m.
That's why you're getting all those error messages. Change it to
CONFIG_USB_EHCI_PCI=y and the errors should go away.
Alan Stern
Thank you, I'll try setting them all to 'y' but right now they are
all set as modules 'm'.
Lets see, I'll try it right away.
Sorry Alan, I tried it - no luck. The errors are still shining bravely
at system start...
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_RENESAS_USBHS is not set
I should've mentioned that the number of errors at last restart
diminished considerably, but maybe it is just accidental. I noticed
similar things on 3.8 too. Sometimes it's 4, sometimes it's 40.
Here is the current dmesg from 3.9 gir master with the suggested changes.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-1-jy-alpha (jenya@Q8) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sat Mar 9 04:41:16 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-jy-alpha root=UUID=8f902f69-ecb8-4df4-a290-308a8788147f ro quiet resume=/dev/disk/by-uuid/8f902f69-ecb8-4df4-a290-308a8788147f resume_offset=186368
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff8e000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 2901 06/17/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask E00000000 write-back
[ 0.000000] 2 base 200000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b08000, 0x01b08fff] PGTABLE
[ 0.000000] BRK [0x01b09000, 0x01b09fff] PGTABLE
[ 0.000000] BRK [0x01b0a000, 0x01b0afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
[ 0.000000] BRK [0x01b0b000, 0x01b0bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff7ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x01b0c000, 0x01b0cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3785c000-0x37c25fff]
[ 0.000000] ACPI: RSDP 00000000000faf00 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bff80100 0004C (v01 A_M_I_ OEMXSDT 06000917 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bff80290 000F4 (v03 A_M_I_ OEMFACP 06000917 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bff80590 09554 (v01 A0543 A0543000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bff8e000 00040
[ 0.000000] ACPI: APIC 00000000bff80390 00080 (v01 A_M_I_ OEMAPIC 06000917 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bff8e040 00066 (v01 A_M_I_ AMI_OEM 06000917 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bff89af0 00038 (v01 A_M_I_ OEMHPET 06000917 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bff89b30 0003C (v01 A_M_I_ OEMMCFG 06000917 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff6000-0x23fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff7ffff]
[ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2096926
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12222 pages used for memmap
[ 0.000000] DMA32 zone: 782208 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bff80000 - 00000000bff8e000
[ 0.000000] PM: Registered nosave memory: 00000000bff8e000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xffafffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85504 r8192 d20992 u524288
[ 0.000000] pcpu-alloc: s85504 r8192 d20992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064139
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-jy-alpha root=UUID=8f902f69-ecb8-4df4-a290-308a8788147f ro quiet resume=/dev/disk/by-uuid/8f902f69-ecb8-4df4-a290-308a8788147f resume_offset=186368
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8174564k/9437184k available (4953k kernel code, 1049480k absent, 213140k reserved, 3983k data, 1084k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2671.206 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5342.41 BogoMIPS (lpj=2671206)
[ 0.001008] pid_max: default: 32768 minimum: 301
[ 0.001041] Security Framework initialized
[ 0.001054] AppArmor: AppArmor disabled by boot time parameter
[ 0.002238] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007302] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009757] Mount-cache hash table entries: 256
[ 0.010038] Initializing cgroup subsys cpuacct
[ 0.010042] Initializing cgroup subsys memory
[ 0.010057] Initializing cgroup subsys devices
[ 0.010059] Initializing cgroup subsys freezer
[ 0.010061] Initializing cgroup subsys net_cls
[ 0.010063] Initializing cgroup subsys blkio
[ 0.010097] CPU: Physical Processor ID: 0
[ 0.010099] CPU: Processor Core ID: 0
[ 0.010101] mce: CPU supports 6 MCE banks
[ 0.010108] CPU0: Thermal monitoring enabled (TM2)
[ 0.010116] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.010186] Freeing SMP alternatives: 16k freed
[ 0.011263] ACPI: Core revision 20130117
[ 0.013572] ACPI: All ACPI Tables successfully acquired
[ 0.014024] ftrace: allocating 19238 entries in 76 pages
[ 0.019431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030072] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (fam: 06, model: 0f, stepping: 06)
[ 0.031000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.031000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.031000] ... version: 2
[ 0.031000] ... bit width: 40
[ 0.031000] ... generic registers: 2
[ 0.031000] ... value mask: 000000ffffffffff
[ 0.031000] ... max period: 000000007fffffff
[ 0.031000] ... fixed-purpose events: 3
[ 0.031000] ... event mask: 0000000700000003
[ 0.047099] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.035337] smpboot: Booting Node 0, Processors #1
[ 0.047112] Brought up 2 CPUs
[ 0.047115] smpboot: Total of 2 processors activated (10684.82 BogoMIPS)
[ 0.048083] devtmpfs: initialized
[ 0.050491] PM: Registering ACPI NVS region [mem 0xbff8e000-0xbffdffff] (335872 bytes)
[ 0.050883] RTC time: 4:58:40, date: 03/09/13
[ 0.050927] NET: Registered protocol family 16
[ 0.051117] ACPI: bus type PCI registered
[ 0.051176] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.051179] PCI: not using MMCONFIG
[ 0.051180] PCI: Using configuration type 1 for base access
[ 0.052021] bio: create slab <bio-0> at 0
[ 0.052039] ACPI: Added _OSI(Module Device)
[ 0.052039] ACPI: Added _OSI(Processor Device)
[ 0.052039] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052039] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.052855] ACPI: EC: Look up EC in DSDT
[ 0.053877] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.057746] ACPI: Interpreter enabled
[ 0.057753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.057764] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.057766] ACPI: Using IOAPIC for interrupt routing
[ 0.057783] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.058776] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.063131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.067325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.067330] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.067332] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.067394] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.067422] PCI host bridge to bus 0000:00
[ 0.067425] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.067427] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.067429] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.067431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.067433] pci_bus 0000:00: root bus resource [mem 0xc0010000-0xffffffff]
[ 0.067442] pci 0000:00:00.0: [8086:277c] type 00 class 0x060000
[ 0.067527] pci 0000:00:01.0: [8086:277d] type 01 class 0x060400
[ 0.067564] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.067581] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.067643] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.067657] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.067718] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.067789] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.067851] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.067875] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.067915] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.067952] pci 0000:00:1d.0: reg 20: [io 0xe480-0xe49f]
[ 0.068002] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.068037] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.068073] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f]
[ 0.068117] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.068151] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.068187] pci 0000:00:1d.2: reg 20: [io 0xe880-0xe89f]
[ 0.068230] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.068267] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.068303] pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f]
[ 0.068347] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.068393] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.068410] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[ 0.068485] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.068520] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.068558] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.068618] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.068658] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.068735] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.068738] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
[ 0.068814] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.068826] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.068834] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.068843] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.068851] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.068860] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.068939] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.068953] pci 0000:00:1f.2: reg 10: [io 0xe400-0xe407]
[ 0.068961] pci 0000:00:1f.2: reg 14: [io 0xe080-0xe083]
[ 0.068968] pci 0000:00:1f.2: reg 18: [io 0xe000-0xe007]
[ 0.068975] pci 0000:00:1f.2: reg 1c: [io 0xdc00-0xdc03]
[ 0.068983] pci 0000:00:1f.2: reg 20: [io 0xd880-0xd88f]
[ 0.068990] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbbff]
[ 0.069026] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.069092] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.069139] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.069262] pci 0000:03:00.0: [10de:0622] type 00 class 0x030000
[ 0.069272] pci 0000:03:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.069282] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.069292] pci 0000:03:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.069299] pci 0000:03:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.069307] pci 0000:03:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
[ 0.071014] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.071019] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.071024] pci 0000:00:01.0: bridge window [mem 0xf8a00000-0xfeafffff]
[ 0.071030] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xefefffff 64bit pref]
[ 0.071104] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.071115] pci 0000:00:1c.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.071205] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.071217] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.071221] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.071224] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.071228] pci 0000:00:1e.0: bridge window [mem 0xc0010000-0xffffffff] (subtractive decode)
[ 0.071242] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.071783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.071832] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.071878] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.071925] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.071971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.072011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.072058] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.072105] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.072202] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.072208] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.072241] Found 1 acpi root devices
[ 0.072320] ACPI: No dock devices found.
[ 0.072361] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.072361] vgaarb: loaded
[ 0.072361] vgaarb: bridge control possible 0000:03:00.0
[ 0.072361] PCI: Using ACPI for IRQ routing
[ 0.073736] PCI: pci_cache_line_size set to 64 bytes
[ 0.073770] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.073772] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
[ 0.073866] NetLabel: Initializing
[ 0.073868] NetLabel: domain hash size = 128
[ 0.073869] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.073880] NetLabel: unlabeled traffic allowed by default
[ 0.073893] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.073896] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.073900] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.080011] Switching to clocksource hpet
[ 0.085590] pnp: PnP ACPI init
[ 0.085610] ACPI: bus type PNP registered
[ 0.085684] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.085688] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.085745] pnp 00:01: [dma 4]
[ 0.085770] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.085807] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.085835] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.085864] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.085997] system 00:05: [io 0x0290-0x0297] has been reserved
[ 0.086009] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086129] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.086132] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.086134] system 00:06: [io 0x0400-0x041f] has been reserved
[ 0.086136] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.086139] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.086141] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.086143] system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.086146] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.086150] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.086153] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086248] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.086347] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.086350] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.086353] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086471] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.086475] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.086606] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.086609] system 00:0a: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.086611] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.086614] system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.086617] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.086714] pnp: PnP ACPI: found 11 devices
[ 0.086716] ACPI: bus type PNP unregistered
[ 0.093493] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.093497] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000
[ 0.093509] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.093512] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.093516] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0100000-0xc04fffff]
[ 0.093519] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.093522] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.093525] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.093528] pci 0000:00:01.0: bridge window [mem 0xf8a00000-0xfeafffff]
[ 0.093532] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xefefffff 64bit pref]
[ 0.093535] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.093538] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.093542] pci 0000:00:1c.0: bridge window [mem 0xc0100000-0xc04fffff]
[ 0.093546] pci 0000:00:1c.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.093551] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.093604] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.093634] pci 0000:00:1e.0: setting latency timer to 64
[ 0.093638] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.093640] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.093642] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.093644] pci_bus 0000:00: resource 7 [mem 0xc0010000-0xffffffff]
[ 0.093646] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.093648] pci_bus 0000:03: resource 1 [mem 0xf8a00000-0xfeafffff]
[ 0.093650] pci_bus 0000:03: resource 2 [mem 0xcff00000-0xefefffff 64bit pref]
[ 0.093652] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.093654] pci_bus 0000:02: resource 1 [mem 0xc0100000-0xc04fffff]
[ 0.093656] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.093659] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.093660] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.093662] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.093664] pci_bus 0000:01: resource 7 [mem 0xc0010000-0xffffffff]
[ 0.093697] NET: Registered protocol family 2
[ 0.093895] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.094341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.094688] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.094742] TCP: reno registered
[ 0.094754] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.094820] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.094955] NET: Registered protocol family 1
[ 0.095361] pci 0000:03:00.0: Boot video device
[ 0.095365] PCI: CLS 16 bytes, default 64
[ 0.095414] Unpacking initramfs...
[ 0.112501] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 0.112987] CPU0: Core temperature/speed normal
[ 0.167341] Freeing initrd memory: 3880k freed
[ 0.168626] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.168631] software IO TLB [mem 0xbbf80000-0xbff80000] (64MB) mapped at [ffff8800bbf80000-ffff8800bff7ffff]
[ 0.168778] Scanning for low memory corruption every 60 seconds
[ 0.169043] audit: initializing netlink socket (disabled)
[ 0.169057] type=2000 audit(1362805120.168:1): initialized
[ 0.179391] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.181305] VFS: Disk quotas dquot_6.5.2
[ 0.181349] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.181521] msgmni has been set to 15973
[ 0.181733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.181760] io scheduler noop registered
[ 0.181762] io scheduler deadline registered
[ 0.181767] io scheduler cfq registered (default)
[ 0.181862] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.181935] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.182059] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 0.182060] vesafb: scrolling: redraw
[ 0.182062] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.182676] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90004f00000, using 9024k, total 9024k
[ 0.269804] Console: switching to colour frame buffer device 240x75
[ 0.356811] fb0: VESA VGA frame buffer device
[ 0.356822] intel_idle: does not run on family 6 model 15
[ 0.356850] GHES: HEST is not enabled!
[ 0.356907] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.357319] [drm] Initialized drm 1.1.0 20060810
[ 0.357363] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.359819] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.359851] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.359954] mousedev: PS/2 mouse device common for all mice
[ 0.360025] rtc_cmos 00:02: RTC can wake from S4
[ 0.360142] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.360164] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.360172] cpuidle: using governor ladder
[ 0.360174] cpuidle: using governor menu
[ 0.360175] EFI Variables Facility v0.08 2004-May-17
[ 0.360184] drop_monitor: Initializing network drop monitor service
[ 0.360248] TCP: cubic registered
[ 0.360363] NET: Registered protocol family 10
[ 0.360506] NET: Registered protocol family 17
[ 0.360515] Key type dns_resolver registered
[ 0.360715] PM: Checking hibernation image partition /dev/disk/by-uuid/8f902f69-ecb8-4df4-a290-308a8788147f
[ 0.403074] PM: Hibernation image not present or could not be loaded.
[ 0.403084] registered taskstats version 1
[ 0.403721] Magic number: 5:520:969
[ 0.404588] Freeing unused kernel memory: 1084k freed
[ 0.404885] Write protecting the kernel read-only data: 8192k
[ 0.407323] Freeing unused kernel memory: 1180k freed
[ 0.408703] Freeing unused kernel memory: 524k freed
[ 0.415531] systemd-udevd[45]: starting version 197
[ 0.417605] SCSI subsystem initialized
[ 0.418775] ACPI: bus type ATA registered
[ 0.419042] libata version 3.00 loaded.
[ 0.419736] ahci 0000:00:1f.2: version 3.0
[ 0.419845] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.419882] ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
[ 0.419902] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.419905] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.419909] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.422025] scsi0 : ahci
[ 0.422692] scsi1 : ahci
[ 0.422764] scsi2 : ahci
[ 0.422848] scsi3 : ahci
[ 0.422897] ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 42
[ 0.422900] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 42
[ 0.422902] ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 42
[ 0.422905] ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 42
[ 0.727043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.728044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.728077] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.732878] ata1.00: ATA-8: SAMSUNG HM251JJ, 2AA00_00, max UDMA7
[ 0.732883] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.733891] ata3.00: ATA-8: SAMSUNG HM640JJ, 2AK10001, max UDMA/133
[ 0.733895] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.733920] ata4.00: ATA-8: SAMSUNG HM640JJ, 2AK10001, max UDMA/133
[ 0.733924] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.738775] ata1.00: configured for UDMA/133
[ 0.738925] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JJ 2AA0 PQ: 0 ANSI: 5
[ 0.739890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.739909] ata3.00: configured for UDMA/133
[ 0.739950] sd 0:0:0:0: [sda] Write Protect is off
[ 0.739953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.739971] ata4.00: configured for UDMA/133
[ 0.739988] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.810101] sda: sda1 sda2 sda3
[ 0.810498] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.134040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.134087] ata2.00: unsupported device, disabling
[ 1.134090] ata2.00: disabled
[ 1.134222] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM640JJ 2AK1 PQ: 0 ANSI: 5
[ 1.134455] sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.134470] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HM640JJ 2AK1 PQ: 0 ANSI: 5
[ 1.134579] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.134582] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.134599] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.134673] sd 3:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.134723] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.134726] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.134749] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.170019] tsc: Refined TSC clocksource calibration: 2671.235 MHz
[ 1.170025] Switching to clocksource tsc
[ 1.194547] sdc: sdc1 sdc2 sdc3
[ 1.194978] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.196002] sdb: sdb1 sdb2 sdb3
[ 1.196434] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.197114] ata_piix 0000:00:1f.1: version 2.13
[ 1.197219] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.197540] scsi4 : ata_piix
[ 1.198127] scsi5 : ata_piix
[ 1.198366] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.198368] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.372855] ACPI: bus type USB registered
[ 1.372884] usbcore: registered new interface driver usbfs
[ 1.372894] usbcore: registered new interface driver hub
[ 1.372927] usbcore: registered new device driver usb
[ 1.373272] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.373590] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.373678] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.373682] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.373690] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.373728] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
[ 1.374319] hub 1-0:1.0: USB hub found
[ 1.374324] hub 1-0:1.0: 2 ports detected
[ 1.374671] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.374674] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.374680] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.374712] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 1.374847] hub 2-0:1.0: USB hub found
[ 1.374851] hub 2-0:1.0: 2 ports detected
[ 1.374971] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.374974] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.374980] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.375014] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 1.375156] hub 3-0:1.0: USB hub found
[ 1.375160] hub 3-0:1.0: 2 ports detected
[ 1.375265] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.375268] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.375303] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 1.375334] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
[ 1.375463] hub 4-0:1.0: USB hub found
[ 1.375467] hub 4-0:1.0: 2 ports detected
[ 1.399022] raid6: sse2x1 4218 MB/s
[ 1.416014] raid6: sse2x2 4425 MB/s
[ 1.433003] raid6: sse2x4 7925 MB/s
[ 1.433005] raid6: using algorithm sse2x4 (7925 MB/s)
[ 1.433006] raid6: using ssse3x2 recovery algorithm
[ 1.433151] async_tx: api initialized (async)
[ 1.433271] xor: measuring software checksum speed
[ 1.443003] prefetch64-sse: 10600.000 MB/sec
[ 1.453003] generic_sse: 9420.000 MB/sec
[ 1.453005] xor: using function: prefetch64-sse (10600.000 MB/sec)
[ 1.454166] md: raid6 personality registered for level 6
[ 1.454169] md: raid5 personality registered for level 5
[ 1.454170] md: raid4 personality registered for level 4
[ 1.586379] PM: Starting manual resume from disk
[ 1.586384] PM: Hibernation image partition 8:18 present
[ 1.586386] PM: Looking for hibernation image.
[ 1.611290] PM: Image not found (code -22)
[ 1.611294] PM: Hibernation image not present or could not be loaded.
[ 1.676038] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[ 1.769810] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.810804] hub 1-2:1.0: USB hub found
[ 1.812766] hub 1-2:1.0: 3 ports detected
[ 1.919018] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.170036] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 2.330790] hub 2-2:1.0: USB hub found
[ 2.332752] hub 2-2:1.0: 3 ports detected
[ 2.414119] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.423471] systemd[1]: Set hostname to <Q8>.
[ 2.439058] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.591415] hub 4-1:1.0: USB hub found
[ 2.593372] hub 4-1:1.0: 4 ports detected
[ 2.677768] usb 1-2.2: new full-speed USB device number 3 using uhci_hcd
[ 2.742574] systemd[1]: Cannot add dependency job for unit dkms.service, ignoring: Unit dkms.service failed to load: No such file or directory. See system logs and 'systemctl status dkms.service' for details.
[ 2.742864] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.742907] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.742918] systemd[1]: Starting Remote File Systems.
[ 2.742929] systemd[1]: Reached target Remote File Systems.
[ 2.742938] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.742962] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.742970] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.742991] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.743004] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.743042] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.743098] systemd[1]: Starting udev Kernel Socket.
[ 2.743118] systemd[1]: Listening on udev Kernel Socket.
[ 2.743162] systemd[1]: Starting udev Control Socket.
[ 2.743184] systemd[1]: Listening on udev Control Socket.
[ 2.743193] systemd[1]: Starting Encrypted Volumes.
[ 2.743202] systemd[1]: Reached target Encrypted Volumes.
[ 2.743230] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.743320] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.743331] systemd[1]: Expecting device dev-disk-by\x2duuid-eca187f7\x2d18de\x2d4710\x2d9688\x2d4dd41d895ac2.device...
[ 2.743342] systemd[1]: Starting Journal Socket.
[ 2.743384] systemd[1]: Listening on Journal Socket.
[ 2.743399] systemd[1]: Started File System Check on Root Device.
[ 2.743408] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.743915] systemd[1]: Starting udev Kernel Device Manager...
[ 2.744394] systemd[1]: Mounting Debug File System...
[ 2.761070] systemd[1]: Started Load Kernel Modules.
[ 2.761087] systemd[1]: Mounting Configuration File System...
[ 2.761420] systemd[1]: Starting Setup Virtual Console...
[ 2.808768] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.808803] systemd[1]: Mounting Huge Pages File System...
[ 2.809239] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.809583] systemd[1]: Mounted FUSE Control File System.
[ 2.809647] systemd[1]: Starting udev Coldplug all Devices...
[ 2.961445] systemd[1]: Starting Apply Kernel Variables...
[ 2.961924] systemd[1]: Starting Journal Service...
[ 2.962340] systemd[1]: Started Journal Service.
[ 3.438921] systemd-udevd[116]: starting version 197
[ 3.921514] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 4.381992] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[ 4.516957] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.516964] ACPI: Power Button [PWRB]
[ 4.518251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.518254] ACPI: Power Button [PWRF]
[ 4.642053] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[ 4.642220] microcode: CPU0 updated to revision 0xd0, date = 2010-09-30
[ 4.642228] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[ 4.642749] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[ 4.642915] microcode: CPU1 updated to revision 0xd0, date = 2010-09-30
[ 4.642958] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 4.679352] EDAC MC: Ver: 3.0.0
[ 4.683774] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130117/utaddress-251)
[ 4.683780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.688205] ehci-pci: EHCI PCI platform driver
[ 4.688272] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 4.688276] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.688284] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.688297] ehci-pci 0000:00:1d.7: debug port 1
[ 4.692420] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
[ 4.692428] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfebfbc00
[ 4.698009] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.698132] hub 5-0:1.0: USB hub found
[ 4.698136] hub 5-0:1.0: 8 ports detected
[ 4.698467] EDAC i82975x: ECC disabled on both channels.
[ 4.711763] usb 1-2.2: can't set config #1, error -71
[ 4.712091] usb 4-1: USB disconnect, device number 2
[ 4.763189] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPIO 1 (20130117/utaddress-251)
[ 4.763195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.763197] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPIO 1 (20130117/utaddress-251)
[ 4.763201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.763202] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.818756] hub 2-2:1.0: hub_port_status failed (err = -71)
[ 4.820762] hub 1-2:1.0: hub_port_status failed (err = -71)
[ 4.821105] usb 1-2: USB disconnect, device number 2
[ 4.821107] usb 1-2.2: USB disconnect, device number 3
[ 4.821745] hub 2-2:1.0: hub_port_status failed (err = -71)
[ 4.822745] hub 2-2:1.0: hub_port_status failed (err = -71)
[ 4.823744] hub 2-2:1.0: hub_port_status failed (err = -71)
[ 4.861067] iTCO_vendor_support: vendor-support=0
[ 4.861454] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.861481] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 4.861671] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.918628] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 4.926039] usb 2-1: USB disconnect, device number 2
[ 5.030023] usb 2-2: USB disconnect, device number 3
[ 5.079485] coretemp coretemp.0: Using relative temperature scale!
[ 5.079496] coretemp coretemp.0: Using relative temperature scale!
[ 5.215241] usbcore: registered new interface driver wacom
[ 5.218528] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.220621] usbcore: registered new interface driver usbhid
[ 5.220623] usbhid: USB HID core driver
[ 5.237021] usb 5-2: new high-speed USB device number 2 using ehci-pci
[ 5.332737] nvidia: module license 'NVIDIA' taints kernel.
[ 5.332743] Disabling lock debugging due to kernel taint
[ 5.345928] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.346274] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.26 Wed Feb 27 13:04:31 PST 2013
[ 5.351498] hub 5-2:1.0: USB hub found
[ 5.351591] hub 5-2:1.0: 3 ports detected
[ 5.400677] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input2
[ 5.418798] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 5.418927] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 5.419115] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 5.419223] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.419323] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.419432] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.419537] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.419638] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.706016] usb 5-4: new high-speed USB device number 4 using ehci-pci
[ 5.828749] hub 5-4:1.0: USB hub found
[ 5.828841] hub 5-4:1.0: 3 ports detected
[ 5.843606] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.931014] usb 5-7: new high-speed USB device number 5 using ehci-pci
[ 5.991061] systemd-journald[125]: Received SIGUSR1
[ 6.046498] hub 5-7:1.0: USB hub found
[ 6.046841] hub 5-7:1.0: 4 ports detected
[ 6.254011] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[ 6.405792] input: Wacom Intuos4 12x19 as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input11
[ 7.188094] usb 5-2.2: new full-speed USB device number 6 using ehci-pci
[ 8.462887] Adding 25165820k swap on /.linuxswap. Priority:-1 extents:24 across:28606464k
[ 12.462099] Bluetooth: Core ver 2.16
[ 12.462119] NET: Registered protocol family 31
[ 12.462121] Bluetooth: HCI device and connection manager initialized
[ 12.462130] Bluetooth: HCI socket layer initialized
[ 12.462133] Bluetooth: L2CAP socket layer initialized
[ 12.462139] Bluetooth: SCO socket layer initialized
[ 12.552697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.552709] Bluetooth: BNEP socket layer initialized
[ 14.604468] EXT4-fs (sdb2): re-mounted. Opts: commit=0
[ 14.652143] EXT4-fs (sdc2): re-mounted. Opts: commit=0
[ 15.503027] NVRM: Your system is not currently configured to drive a VGA console
[ 15.503031] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.503033] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.503035] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.503036] NVRM: corruption and stability problems, and is not supported.
[ 17.304763] hid-generic 0003:05AC:9223.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0000:00:1d.7-2.2/input0
[ 17.353104] usb 5-4.2: new low-speed USB device number 7 using ehci-pci
[ 17.514354] usb 5-7.3: new high-speed USB device number 8 using ehci-pci
[ 17.580564] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2:1.0/input/input12
[ 17.580719] apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-4.2/input0
[ 17.581472] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4.2/5-4.2:1.1/input/input13
[ 17.581563] apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-4.2/input1
[ 17.975288] cfg80211: Calling CRDA to update world regulatory domain
[ 18.078668] cfg80211: World regulatory domain updated:
[ 18.078672] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.078674] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.078676] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.078678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.078679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.078681] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.371297] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.371637] ieee80211 phy0: hwaddr 00:15:af:03:b1:88, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 18.382983] rtl8187: Customer ID is 0x00
[ 18.384237] rtl8187: wireless switch is on
[ 18.384506] usbcore: registered new interface driver rtl8187
[ 18.433183] systemd-udevd[145]: renamed network interface wlan0 to wlp0s29f7u7u3
[ 20.329766] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u7u3: link is not ready
[ 23.445544] wlp0s29f7u7u3: authenticate with 00:13:49:df:22:72
[ 23.589610] wlp0s29f7u7u3: send auth to 00:13:49:df:22:72 (try 1/3)
[ 23.592724] wlp0s29f7u7u3: authenticated
[ 23.592859] rtl8187 5-7.3:1.0 wlp0s29f7u7u3: disabling HT as WMM/QoS is not supported by the AP
[ 23.592865] rtl8187 5-7.3:1.0 wlp0s29f7u7u3: disabling VHT as WMM/QoS is not supported by the AP
[ 23.593039] wlp0s29f7u7u3: associate with 00:13:49:df:22:72 (try 1/3)
[ 23.595487] wlp0s29f7u7u3: RX AssocResp from 00:13:49:df:22:72 (capab=0x411 status=0 aid=1)
[ 23.596230] wlp0s29f7u7u3: associated
[ 23.596251] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u7u3: link becomes ready
[ 300.115070] CPU0: Core temperature/speed normal
[ 300.701017] mce: [Hardware Error]: Machine check events logged
[ 600.115212] CPU0: Core temperature above threshold, cpu clock throttled (total events = 385154)
[ 600.115701] CPU0: Core temperature/speed normal
[ 600.704393] mce: [Hardware Error]: Machine check events logged
[ 900.116361] CPU0: Core temperature above threshold, cpu clock throttled (total events = 700144)
[ 900.116850] CPU0: Core temperature/speed normal
[ 1050.701014] mce: [Hardware Error]: Machine check events logged
[ 1209.576988] CPU0: Core temperature above threshold, cpu clock throttled (total events = 852343)
[ 1209.577476] CPU0: Core temperature/speed normal
[ 1350.704012] mce: [Hardware Error]: Machine check events logged
[ 1536.759388] CPU0: Core temperature above threshold, cpu clock throttled (total events = 853418)
[ 1536.759875] CPU0: Core temperature/speed normal
[ 1800.701043] mce: [Hardware Error]: Machine check events logged
[ 1846.391429] CPU0: Core temperature above threshold, cpu clock throttled (total events = 856553)
[ 1846.391915] CPU0: Core temperature/speed normal
[ 1950.701022] mce: [Hardware Error]: Machine check events logged
[ 2156.225492] CPU0: Core temperature above threshold, cpu clock throttled (total events = 858459)
[ 2156.225979] CPU0: Core temperature/speed normal
[ 2175.701011] mce: [Hardware Error]: Machine check events logged
[ 2927.957714] CPU0: Core temperature above threshold, cpu clock throttled (total events = 858839)
[ 2927.958201] CPU0: Core temperature/speed normal
[ 3000.701032] mce: [Hardware Error]: Machine check events logged
[ 3475.153751] CPU0: Core temperature above threshold, cpu clock throttled (total events = 858840)
[ 3475.154238] CPU0: Core temperature/speed normal
