Re: Not enough resource for old configuration after USB bus reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Feb 25, 2013 at 09:32:51AM -0800, Sarah Sharp wrote:
> > > > If the problem is related only to device reset, then it would
> > > > have failed USB30CV Device Reset test which drives 500 Device
> > > > Resets and checks that device reenumerates. I doubt that's
> > > > the case though, since TI's TUSB7340 is built with a USB3
> > > > Certified IP.
> > > > 
> > > 
> > > We have try two devices, both are USB-IF certified, on this host and
> > > they fail with same scenario.
> > > And these two devices can successfully reset several times on some
> > > other host.
> > 
> > that's alright, I'm just wondering how come this wasn't caught during
> > certification... perhaps certification lab didn't use a device with
> > periodic endpoints to run the test.
> 
> Or maybe they issue a Configure Endpoint command to drop all endpoints
> before they issue the Reset Device command?  That was my proposed
> work-around.

well, if it works, great :-) Funny that I couldn't reproduce it here
though :-s

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux