On Fri, Feb 15, 2013 at 06:25:00PM -0500, Doug Minett wrote: > I did some followup on another machine at my disposal running a Debian 2.6.32-5-686-bigmem on the same hardware as the Ubuntu box - Dell Poweredge T110 II > > I plugged Digi in and had the same response as with the Ubuntu box - io_edgeport was not loaded/no new devices/same dmesg report. > > Then I manually loaded io_edgeport and plugged the Digi in again. > > dmesg (after manual load) is a bit different than with Ubuntu: > > [29735001.555230] usb 2-1.6: new full speed USB device using ehci_hcd and address 65 > [29735001.647709] usb 2-1.6: New USB device found, idVendor=1608, idProduct=0288 Ah, this is a new device id, that's why things aren't working. Linux doesn't know how to control this device. Perhaps if we add it to the existing io_edgeport driver, it would work, can you try that? You can do the following, as root: - unplug the device - load the module: modprobe io_edgeport - add a new device id: echo "0x1608 0x0288" > /sys/bus/usb-serial/drivers/io_edgeport/new_id - plug the device in. Let us know if that works or not. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
