Re: Disconnecting an USB3 device from xhci-port isn't detected properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 09, 2013 at 03:44:59PM +0100, Tilman Schmidt wrote:
> Am 08.02.2013 20:36, schrieb Matthias Schniedermeyer:
> 
> >>>>> After updating from 3.7.2 to 3.7.6 disconnecting a USB3 device from a 
> >>>>> xhci-port isn't detected properly anymore. After removing a 32GB stick 
> >>>>> the only line in syslog i can see is:
> >>>>> sdc: detected capacity change from 31625052160 to 0
> >>>>> /dev/sdc is still there.
> >>>>> Reconnecting the device results in "usb 3-1: USB disconnect, device number 2"
> >>>>> immediatly followed by the normal slew of "new device found" messages.
> > 
> > Git bisect points to this commit:
> > f7965c0846d74b270e246c1470ca955d5078eb07
> 
> Here's another regression report pointing to that same commit:
> http://lkml.org/lkml/2013/1/28/546
> "external HDD in USB3 enclosure cannot be dynamically removed"

I already asked for dmesg from that submitter, but could Matthias send
me dmesg of the issue as well?  I need CONFIG_USB_DEBUG and
CONFIG_USB_XHCI_HCD_DEBUGGING turned on.

Sarah Sharap
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux