On Mon, Feb 04, 2013 at 02:24:26PM +0100, Sascha Hauer wrote: > 4th round of patches. > > Peter, I would be glad if you could test them before your holiday. I rebased > your last round of Chipidea OTG patches onto this series which you can pull > here: > > git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-otg-for-next > > I couldn't really test the otg patches since my current hardware does not have > the ID pin connected, but I can verify that my usecase still works with your > patches applied. Sascha, I have tested your patchset, it works after adding a few of changes at my otg patchset (we still need to read otgsc for gadget-only function). I use my mx6q sabrelite board to test. I have tested all roles with below diff: diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 49527d7..cdbf2ec 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -72,6 +72,10 @@ pinctrl-0 = <&pinctrl_usbotg_1>; disable-over-current; otg_id_pin_select_change; + /* dr_mode = "peripheral"; */ + /* dr_mode = "host"; */ + dr_mode = "otg"; + phy_type = "utmi_wide"; status = "okay"; }; So, feel free to add my Tested-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> Besides, if you have a mx51 bbg board, you can test id-switch function. For mx5x, you may need a phy driver. My git: https://github.com/hzpeterchen/linux-usb.git master It is based on your tag, and add latest otg patch. Besides, it has Michael Grzeschik/Marc Kleine-Budde usb misc patch as well as my platform changes for mx6q board. > > Alex, should the patches work for you and are fine otherwise, could you apply > them for v3.9? > > Sascha > > -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
