Re: [PATCH 02/13] USB: phy: nop: Defer probe if device needs VCC/RESET

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 04 February 2013 09:28 PM, Roger Quadros wrote:
Add 2 flags, needs_vcc and needs_reset to platform data.
If the flag is set and the regulator couldn't be found
then we bail out with -EPROBE_DEFER.

For device tree boot we depend on presensce of vcc-supply/
reset-supply properties to decide if we should bail out
with -EPROBE_DEFER or just continue in case the regulator
can't be found.

This is required for proper functionality in cases where the
regulator is needed but is probed later than the PHY device.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
  drivers/usb/otg/nop-usb-xceiv.c   |    8 ++++++++
  include/linux/usb/nop-usb-xceiv.h |    4 ++++
  2 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index adbb7ab..7860e7569 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -147,6 +147,10 @@ static void nop_xeiv_get_dt_pdata(struct device *dev,

  	if (!of_property_read_u32(node, "clock-frequency", &clk_rate))
  		pdata->clk_rate = clk_rate;
+	if (of_property_read_bool(node, "vcc-supply"))
+		pdata->needs_vcc = true;
This can be written as..
pdata->needs_vcc = of_property_read_bool(node, "vcc-supply");

+	if (of_property_read_bool(node, "reset-supply"))
+		pdata->needs_reset = true;
same here..
  }

  static int nop_usb_xceiv_probe(struct platform_device *pdev)
@@ -205,12 +209,16 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
  	if (IS_ERR(nop->vcc)) {
  		dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
  					PTR_ERR(nop->vcc));
+		if (pdata->needs_vcc)
+			return -EPROBE_DEFER;
  	}

  	nop->reset = devm_regulator_get(&pdev->dev, "reset");
  	if (IS_ERR(nop->reset)) {
  		dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
  					PTR_ERR(nop->reset));
+		if (pdata->needs_reset)
+			return -EPROBE_DEFER;
  	}

  	nop->dev		= &pdev->dev;
diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h
index 3265b61..148d351 100644
--- a/include/linux/usb/nop-usb-xceiv.h
+++ b/include/linux/usb/nop-usb-xceiv.h
@@ -6,6 +6,10 @@
  struct nop_usb_xceiv_platform_data {
  	enum usb_phy_type type;
  	unsigned long clk_rate;
+
+	/* if set fails with -EPROBE_DEFER if can't get regulator */
+	unsigned int needs_vcc:1;
+	unsigned int needs_reset:1;

how about u8 here?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux