Re: 3.7 kernel hangs when doing scp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

On Tue, Dec 18, 2012 at 12:43 AM, Greg KH <greg@xxxxxxxxx> wrote:
> On Tue, Dec 18, 2012 at 12:01:35AM -0200, Fabio Estevam wrote:
>> Hi,
>>
>> Booting a 3.7 kernel on a mx6qsabrelite board via NFS and using an
>> asix USB/Ethernet adapter and then I try to transfer a 10MB file from
>> the target to the host:
>
> Has this ever worked before on any older kernel?

We did more experiments on this and we noticed that:

- mx51 running kernel 3.7 does not show this problem (tested a non-dt
mx51 kernel, which uses drivers/usb/host/ehci-mxc.c instead of the
chipidea driver.)
- x86 running 3.2 kernel does not show this problem
- usb support on mx6 has appeared on 3.6, but running an out-of-tree
3.0.35 kernel also shows the same issue.
- Doing long file transfers via mass storage on mx6 running 3.7 works fine.

Shawn/Sascha/Peter,

Any suggestions as to how debug this? By looking at the kernel dumps
it seems to point to 'gic_handle_irq' area.

Thanks,

Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux