Re: problem with Roseweil eusb3 enclosure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



And thanks again for all your work on this -- its been a real pain.

Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:

> On Sat, Oct 27, 2012 at 04:48:55AM -0400, covici@xxxxxxxxxxxxxx wrote:
> > Hi.  Well, here is an interesting piece of information -- I started from
> > a poweroff state and the disk drive is seen even when its plugged in!
> > However, I  almost never do it that way and certainly it would not  work
> > remotely.
> 
> Yes, I agree, let's fix the issue when you don't cold-boot.
> 
> > With that said, here is the syslog and the dmesg from a boot with the
> > power on, so you should see the error.
> 
> Thanks.  I think I see the issue.  Can you try to apply the attached
> patch and see if it allows your device to work when connected on boot?
> 
> You can follow the instructions in the "Patching your kernel" section of
> http://kernelnewbies.org/KernelBuild if you need help.
> 
> Alan, can you take a look at the patch and see what I can do in the case
> where five warm port resets fail?  I think it's a pretty unlikely
> scenario, but if you have a good solution, I'm all ears.
> 
> Sarah Sharp

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux